Cleanup UNREFERENCED_1PARAMETER() macro because "hw" is used.
And remove Light Spring codes because the device was never
productised. And cleanup unused bypass codes.
Signed-off-by: Xiaoyun Li <xiaoyun...@intel.com>
---
v2:
* Merge base code change and ethdev fix into 1 patch to avoid in
* between build issue.
---
drivers/net/ixgbe/base/ixgbe_82599.c | 10 ----------
drivers/net/ixgbe/base/ixgbe_api.c | 3 ---
drivers/net/ixgbe/base/ixgbe_common.c | 6 ------
drivers/net/ixgbe/base/ixgbe_phy.c | 1 -
drivers/net/ixgbe/base/ixgbe_type.h | 9 ++-------
drivers/net/ixgbe/ixgbe_ethdev.c | 1 -
6 files changed, 2 insertions(+), 28 deletions(-)
diff --git a/drivers/net/ixgbe/base/ixgbe_82599.c
b/drivers/net/ixgbe/base/ixgbe_82599.c
index 33d8c4a31..7de753fd3 100644
--- a/drivers/net/ixgbe/base/ixgbe_82599.c
+++ b/drivers/net/ixgbe/base/ixgbe_82599.c
@@ -58,9 +58,6 @@ void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw)
mac->ops.setup_mac_link = ixgbe_setup_mac_link_82599;
mac->ops.set_rate_select_speed =
ixgbe_set_hard_rate_select_speed;
- if (ixgbe_get_media_type(hw) == ixgbe_media_type_fiber_fixed)
- mac->ops.set_rate_select_speed =
- ixgbe_set_soft_rate_select_speed;
} else {
if ((ixgbe_get_media_type(hw) == ixgbe_media_type_backplane) &&
(hw->phy.smart_speed == ixgbe_smart_speed_auto ||
@@ -532,16 +529,9 @@ enum ixgbe_media_type ixgbe_get_media_type_82599(struct
ixgbe_hw *hw)
case IXGBE_DEV_ID_82599_T3_LOM:
media_type = ixgbe_media_type_copper;
break;
- case IXGBE_DEV_ID_82599_LS:
- media_type = ixgbe_media_type_fiber_lco;
- break;
case IXGBE_DEV_ID_82599_QSFP_SF_QP:
media_type = ixgbe_media_type_fiber_qsfp;
break;
- case IXGBE_DEV_ID_82599_BYPASS:
- media_type = ixgbe_media_type_fiber_fixed;
- hw->phy.multispeed_fiber = true;
- break;
default:
media_type = ixgbe_media_type_unknown;
break;
diff --git a/drivers/net/ixgbe/base/ixgbe_api.c
b/drivers/net/ixgbe/base/ixgbe_api.c
index a2eab1361..3450d401f 100644
--- a/drivers/net/ixgbe/base/ixgbe_api.c
+++ b/drivers/net/ixgbe/base/ixgbe_api.c
@@ -148,8 +148,6 @@ s32 ixgbe_set_mac_type(struct ixgbe_hw *hw)
case IXGBE_DEV_ID_82599_QSFP_SF_QP:
case IXGBE_DEV_ID_82599EN_SFP:
case IXGBE_DEV_ID_82599_CX4:
- case IXGBE_DEV_ID_82599_LS:
- case IXGBE_DEV_ID_82599_BYPASS:
case IXGBE_DEV_ID_82599_T3_LOM:
hw->mac.type = ixgbe_mac_82599EB;
break;
@@ -164,7 +162,6 @@ s32 ixgbe_set_mac_type(struct ixgbe_hw *hw)
break;
case IXGBE_DEV_ID_X540T:
case IXGBE_DEV_ID_X540T1:
- case IXGBE_DEV_ID_X540_BYPASS:
hw->mac.type = ixgbe_mac_X540;
hw->mvals = ixgbe_mvals_X540;
break;
diff --git a/drivers/net/ixgbe/base/ixgbe_common.c
b/drivers/net/ixgbe/base/ixgbe_common.c
index d7b63c656..b4a0d7003 100644
--- a/drivers/net/ixgbe/base/ixgbe_common.c
+++ b/drivers/net/ixgbe/base/ixgbe_common.c
@@ -138,7 +138,6 @@ bool ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw)
DEBUGFUNC("ixgbe_device_supports_autoneg_fc");
switch (hw->phy.media_type) {
- case ixgbe_media_type_fiber_fixed:
case ixgbe_media_type_fiber_qsfp:
case ixgbe_media_type_fiber:
/* flow control autoneg black list */
@@ -172,7 +171,6 @@ bool ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw)
case IXGBE_DEV_ID_82599_T3_LOM:
case IXGBE_DEV_ID_X540T:
case IXGBE_DEV_ID_X540T1:
- case IXGBE_DEV_ID_X540_BYPASS:
case IXGBE_DEV_ID_X550T:
case IXGBE_DEV_ID_X550T1:
case IXGBE_DEV_ID_X550EM_X_10G_T:
@@ -238,7 +236,6 @@ s32 ixgbe_setup_fc_generic(struct ixgbe_hw *hw)
goto out;
/* fall through - only backplane uses autoc */
- case ixgbe_media_type_fiber_fixed:
case ixgbe_media_type_fiber_qsfp:
case ixgbe_media_type_fiber:
reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA);
@@ -3098,7 +3095,6 @@ void ixgbe_fc_autoneg(struct ixgbe_hw *hw)
switch (hw->phy.media_type) {
/* Autoneg flow control on fiber adapters */
- case ixgbe_media_type_fiber_fixed:
case ixgbe_media_type_fiber_qsfp:
case ixgbe_media_type_fiber:
if (speed == IXGBE_LINK_SPEED_1GB_FULL)
@@ -5238,7 +5234,6 @@ s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw
*hw,
/* Set the module link speed */
switch (hw->phy.media_type) {
- case ixgbe_media_type_fiber_fixed:
case ixgbe_media_type_fiber:
ixgbe_set_rate_select_speed(hw,
IXGBE_LINK_SPEED_10GB_FULL);
@@ -5289,7 +5284,6 @@ s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw
*hw,
/* Set the module link speed */
switch (hw->phy.media_type) {
- case ixgbe_media_type_fiber_fixed:
case ixgbe_media_type_fiber:
ixgbe_set_rate_select_speed(hw,
IXGBE_LINK_SPEED_1GB_FULL);
diff --git a/drivers/net/ixgbe/base/ixgbe_phy.c
b/drivers/net/ixgbe/base/ixgbe_phy.c
index 47451c982..6cdd8fbab 100644
--- a/drivers/net/ixgbe/base/ixgbe_phy.c
+++ b/drivers/net/ixgbe/base/ixgbe_phy.c
@@ -2565,7 +2565,6 @@ STATIC bool ixgbe_get_i2c_data(struct ixgbe_hw *hw, u32
*i2cctl)
{
u32 data_oe_bit = IXGBE_I2C_DATA_OE_N_EN_BY_MAC(hw);
bool data;
- UNREFERENCED_1PARAMETER(hw);
DEBUGFUNC("ixgbe_get_i2c_data");
diff --git a/drivers/net/ixgbe/base/ixgbe_type.h
b/drivers/net/ixgbe/base/ixgbe_type.h
index cc26496e3..ff3546ece 100644
--- a/drivers/net/ixgbe/base/ixgbe_type.h
+++ b/drivers/net/ixgbe/base/ixgbe_type.h
@@ -17,8 +17,8 @@
*
* - IXGBE_ERROR_POLLING
* This category is for errors related to polling/timeout issues and should be
- * used in any case where the timeout occured, or a failure to obtain a lock,
or
- * failure to receive data within the time limit.
+ * used in any case where the timeout occurred, or a failure to obtain a lock,
+ * or failure to receive data within the time limit.
*
* - IXGBE_ERROR_CAUTION
* This category should be used for reporting issues that may be the cause of
@@ -93,12 +93,9 @@
#define IXGBE_DEV_ID_82599_T3_LOM 0x151C
#define IXGBE_DEV_ID_82599_VF 0x10ED
#define IXGBE_DEV_ID_82599_VF_HV 0x152E
-#define IXGBE_DEV_ID_82599_LS 0x154F
-#define IXGBE_DEV_ID_82599_BYPASS 0x155D
#define IXGBE_DEV_ID_X540T 0x1528
#define IXGBE_DEV_ID_X540_VF 0x1515
#define IXGBE_DEV_ID_X540_VF_HV 0x1530
-#define IXGBE_DEV_ID_X540_BYPASS 0x155C
#define IXGBE_DEV_ID_X540T1 0x1560
#define IXGBE_DEV_ID_X550T 0x1563
#define IXGBE_DEV_ID_X550T1 0x15D1
@@ -3726,9 +3723,7 @@ enum ixgbe_sfp_type {
enum ixgbe_media_type {
ixgbe_media_type_unknown = 0,
ixgbe_media_type_fiber,
- ixgbe_media_type_fiber_fixed,
ixgbe_media_type_fiber_qsfp,
- ixgbe_media_type_fiber_lco,
ixgbe_media_type_copper,
ixgbe_media_type_backplane,
ixgbe_media_type_cx4,
diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c
index cee886754..4c3f9a993 100644
--- a/drivers/net/ixgbe/ixgbe_ethdev.c
+++ b/drivers/net/ixgbe/ixgbe_ethdev.c
@@ -437,7 +437,6 @@ static const struct rte_pci_id pci_id_ixgbe_map[] = {
{ RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82599EN_SFP) },
{ RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82599_XAUI_LOM) },
{ RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82599_T3_LOM) },
- { RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82599_LS) },
{ RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X540T) },
{ RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X540T1) },
{ RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X550EM_X_SFP) },
--
2.17.1
