After IN_ORDER Rx/Tx paths added, need to update Rx/Tx path selection
logic.
Rx path select logic: If IN_ORDER is disabled will select normal Rx
path. If IN_ORDER is enabled, Rx offload and merge-able are disabled
will select simple Rx path. Otherwise will select IN_ORDER Rx path.
Tx path select logic: If IN_ORDER is disabled will select normal Tx
path. If IN_ORDER is enabled and merge-able is disabled will select
simple Tx path. Otherwise will select IN_ORDER Tx path.
Signed-off-by: Marvin Liu <yong....@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coque...@redhat.com>
diff --git a/doc/guides/nics/virtio.rst b/doc/guides/nics/virtio.rst
index 46e292c4d..1b88cec96 100644
--- a/doc/guides/nics/virtio.rst
+++ b/doc/guides/nics/virtio.rst
@@ -201,7 +201,7 @@ The packet transmission flow is:
Virtio PMD Rx/Tx Callbacks
--------------------------
-Virtio driver has 3 Rx callbacks and 2 Tx callbacks.
+Virtio driver has 4 Rx callbacks and 3 Tx callbacks.
Rx callbacks:
@@ -215,6 +215,9 @@ Rx callbacks:
Vector version without mergeable Rx buffer support, also fixes the available
ring indexes and uses vector instructions to optimize performance.
+#. ``virtio_recv_mergeable_pkts_inorder``:
+ In-order version with mergeable Rx buffer support.
+
Tx callbacks:
#. ``virtio_xmit_pkts``:
@@ -223,13 +226,17 @@ Tx callbacks:
#. ``virtio_xmit_pkts_simple``:
Vector version fixes the available ring indexes to optimize performance.
+#. ``virtio_xmit_pkts_inorder``:
+ In-order version.
-By default, the non-vector callbacks are used:
+By default, the in-order callbacks are used:
* For Rx: If mergeable Rx buffers is disabled then ``virtio_recv_pkts`` is
- used; otherwise ``virtio_recv_mergeable_pkts``.
+ used; If in-order is enabled then ``virtio_recv_mergeable_pkts_inirder``;
+ otherwise ``virtio_recv_mergeable_pkts``.
-* For Tx: ``virtio_xmit_pkts``.
+* For Tx: If in-order is enabled then ``virtio_xmit_pkts_inorder``;
+ otherwise ``virtio_xmit_pkts``.
Vector callbacks will be used when:
@@ -242,6 +249,8 @@ Vector callbacks will be used when:
* Mergeable Rx buffers is disabled.
+* In-order is enabled
+
The corresponding callbacks are:
* For Rx: ``virtio_recv_pkts_vec``.
diff --git a/drivers/net/virtio/virtio_ethdev.c
b/drivers/net/virtio/virtio_ethdev.c
index df50a571a..5f5b72de3 100644
--- a/drivers/net/virtio/virtio_ethdev.c
+++ b/drivers/net/virtio/virtio_ethdev.c
@@ -1320,6 +1320,11 @@ set_rxtx_funcs(struct rte_eth_dev *eth_dev)
PMD_INIT_LOG(INFO, "virtio: using simple Rx path on port %u",
eth_dev->data->port_id);
eth_dev->rx_pkt_burst = virtio_recv_pkts_vec;
+ } else if (hw->use_inorder_rx) {
+ PMD_INIT_LOG(INFO,
+ "virtio: using inorder mergeable buffer Rx path on port
%u",
+ eth_dev->data->port_id);
+ eth_dev->rx_pkt_burst = &virtio_recv_mergeable_pkts_inorder;
} else if (vtpci_with_feature(hw, VIRTIO_NET_F_MRG_RXBUF)) {
PMD_INIT_LOG(INFO,
"virtio: using mergeable buffer Rx path on port %u",
@@ -1335,6 +1340,10 @@ set_rxtx_funcs(struct rte_eth_dev *eth_dev)
PMD_INIT_LOG(INFO, "virtio: using simple Tx path on port %u",
eth_dev->data->port_id);
eth_dev->tx_pkt_burst = virtio_xmit_pkts_simple;
+ } else if (hw->use_inorder_tx) {
+ PMD_INIT_LOG(INFO, "virtio: using inorder Tx path on port %u",
+ eth_dev->data->port_id);
+ eth_dev->tx_pkt_burst = virtio_xmit_pkts_inorder;
} else {
PMD_INIT_LOG(INFO, "virtio: using standard Tx path on port %u",
eth_dev->data->port_id);
@@ -1871,8 +1880,18 @@ virtio_dev_configure(struct rte_eth_dev *dev)
rte_spinlock_init(&hw->state_lock);
- hw->use_simple_rx = 1;
- hw->use_simple_tx = 1;
+ if (vtpci_with_feature(hw, VIRTIO_F_IN_ORDER)) {
+ if (vtpci_with_feature(hw, VIRTIO_NET_F_MRG_RXBUF)) {
+ hw->use_inorder_rx = 1;
+ hw->use_inorder_tx = 1;
+ } else {
+ hw->use_simple_rx = 1;
+ hw->use_simple_tx = 1;
+ if (rx_offloads & (DEV_RX_OFFLOAD_UDP_CKSUM |
+ DEV_RX_OFFLOAD_TCP_CKSUM))
+ hw->use_simple_rx = 0;
+ }
+ }
#if defined RTE_ARCH_ARM64 || defined RTE_ARCH_ARM
if (!rte_cpu_get_flag_enabled(RTE_CPUFLAG_NEON)) {
@@ -1880,14 +1899,6 @@ virtio_dev_configure(struct rte_eth_dev *dev)
hw->use_simple_tx = 0;
}
#endif
- if (vtpci_with_feature(hw, VIRTIO_NET_F_MRG_RXBUF)) {
- hw->use_simple_rx = 0;
- hw->use_simple_tx = 0;
- }
-
- if (rx_offloads & (DEV_RX_OFFLOAD_UDP_CKSUM |
- DEV_RX_OFFLOAD_TCP_CKSUM))
- hw->use_simple_rx = 0;
return 0;
}
--
2.17.0
