This patch series update IXGBE base code (a.k.a. share code) from
package 2014.03.13 to package 2014.09.04, all in all, it includes the
following changes:
1. Change comments and fix typo in IXGBE base code.
2. Clean up IXGBE base code.
3. Implement a function to check command complete for flow director in
IXGBE base code.
4. Support cloud filter and tunnel in IXGBE base code.
5. Refine function to let eeprom checksum calculation return either a
negative error code on error, or the 16-bit checksum in IXGBE base
code.
6. Let caller determine if it need read and return data or not after
executing host interface command in IXGBE base code.
7. Extend mask from 16 bits to 32 bits for releasing or acquiring SWFW
semaphore in IXGBE base code. It is used in reading and writing I2C
byte.
8. Implement functions to do I2C byte read and write in IXGBE base code;
Relocate function of ixgbe_mng_enabled.
9. Support device id 82599_QSFP and 82599_LS in IXGBE base code.
10. It need wait for 5 ms for polling EEC register in IXGBE X540 base
code.
11. Define new error type in IXGBE base code, they are used to report
different kinds of error.
12. Use hardware MAC type to determine I2C control, clock in/out, and data
in/out in IXGBE base code.
13. Store lan_id and physical semaphore mask into hardware physical
information,
and use them to control read and write physical registers in IXGBE base
code.
14. Remove unnecessary delay when setting up physical link and negotiate
in IXGBE base code.
15. Implement a function to reset VF register to initial values in IXGBE
base code.
16. Support these functionalities in IXGBE base code: Thermal sensor,
DMA coalescing, EEE support, Source address pruning,
Anti-spoofing, Iosf buffer reading and writing, Malicious
driver detection.
17. Support X550 in IXGBE base code.
18. Support X550 in IXGBE poll mode driver.
Changchun Ouyang (18):
Update comments and fix some comments typo in IXGBE share code.
Clean up IXGBE share code.
Implement a function to check command complete for flow director in
IXGBE share code.
Support cloud mode in IXGBE share code.
Refine function to let eeprom checksum calculation return either a
negative error code on error, or the 16-bit checksum in IXGBE share
code.
Let caller determine if it need read and return data or not after
executing host interface command in IXGBE share code.
Extend mask from 16 bits to 32 bits for releasing or acquiring SWFW
semaphore in IXGBE share code. It is used in reading and writing I2C
byte.
Implement functions to do I2C byte read and write in IXGBE share code;
relocate function of ixgbe_mng_enabled.
Support device id 82599_QSFP and 82599_LS in IXGBE share code.
It need wait for 5 msec for polling EEC register in IXGBE X540 share
code.
Define new error type in IXGBE share code, they are used to report
different kinds of error.
Use hardware MAC type to determine I2C control, clock in/out, data
in/out in IXGBE share code.
Store lan_id and physical semaphore mask into hw->phy, and use them to
control read and write physical registers in IXGBE share code.
Remove unnecessary delay when setting up physical link and negotiate
in IXGBE share code.
Implement a function to reset VF register to initial values in IXGBE
share code.
Support these functionalities in IXGBE share code: Thermal sensor,
DMA coalescing, EEE support, Source address pruning,
Anti-spoofing, Iosf buffer reading and writing, Malicious
driver detection.
Support X550 in IXGBE share code.
Support X550 in IXGBE poll mode driver.
lib/librte_eal/common/include/rte_pci_dev_ids.h | 14 +
lib/librte_ether/rte_ethdev.h | 2 +-
lib/librte_pmd_ixgbe/Makefile | 2 +
lib/librte_pmd_ixgbe/ixgbe/README | 3 +-
lib/librte_pmd_ixgbe/ixgbe/ixgbe_82598.c | 2 -
lib/librte_pmd_ixgbe/ixgbe/ixgbe_82599.c | 404 +++--
lib/librte_pmd_ixgbe/ixgbe/ixgbe_api.c | 212 ++-
lib/librte_pmd_ixgbe/ixgbe/ixgbe_api.h | 24 +-
lib/librte_pmd_ixgbe/ixgbe/ixgbe_common.c | 386 ++++-
lib/librte_pmd_ixgbe/ixgbe/ixgbe_common.h | 23 +-
lib/librte_pmd_ixgbe/ixgbe/ixgbe_dcb.c | 20 +
lib/librte_pmd_ixgbe/ixgbe/ixgbe_dcb_82598.c | 2 +
lib/librte_pmd_ixgbe/ixgbe/ixgbe_dcb_82599.c | 1 +
lib/librte_pmd_ixgbe/ixgbe/ixgbe_mbx.c | 4 +
lib/librte_pmd_ixgbe/ixgbe/ixgbe_osdep.h | 12 +
lib/librte_pmd_ixgbe/ixgbe/ixgbe_phy.c | 651 ++++++--
lib/librte_pmd_ixgbe/ixgbe/ixgbe_phy.h | 23 +-
lib/librte_pmd_ixgbe/ixgbe/ixgbe_type.h | 471 +++++-
lib/librte_pmd_ixgbe/ixgbe/ixgbe_vf.c | 61 +
lib/librte_pmd_ixgbe/ixgbe/ixgbe_vf.h | 3 +
lib/librte_pmd_ixgbe/ixgbe/ixgbe_x540.c | 244 +--
lib/librte_pmd_ixgbe/ixgbe/ixgbe_x540.h | 6 +-
lib/librte_pmd_ixgbe/ixgbe/ixgbe_x550.c | 1809 +++++++++++++++++++++++
lib/librte_pmd_ixgbe/ixgbe/ixgbe_x550.h | 88 ++
lib/librte_pmd_ixgbe/ixgbe_bypass_api.h | 9 +
lib/librte_pmd_ixgbe/ixgbe_ethdev.c | 11 +-
lib/librte_pmd_ixgbe/ixgbe_fdir.c | 35 +-
lib/librte_pmd_ixgbe/ixgbe_pf.c | 6 +-
lib/librte_pmd_ixgbe/ixgbe_rxtx.c | 6 +
29 files changed, 4046 insertions(+), 488 deletions(-)
create mode 100644 lib/librte_pmd_ixgbe/ixgbe/ixgbe_x550.c
create mode 100644 lib/librte_pmd_ixgbe/ixgbe/ixgbe_x550.h
--
1.8.4.2
