Thank you for explanation. I have a few questions regarding the setup flow yet:
1. Why we need this step: > 3. Setup a flow director rule to distribute packets with source ip > > > > > > 0.0.0.0 to rxq No.0 > > > > > > > ethtool -N eth0 flow-type udp4 src-ip 0.0.0.0 action 0 2. You presented the filter setup for receiving all udp4 packets on specific queue > > > > > > 5. Setup a flow director rule to distribute packets with source ip > > > > > > 1.1.1.1 to rxq No.32. This needs to be done after testpmd > > > > > > starts. > > > > > > > ethtool -N eth0 flow-type udp4 src-ip 1.1.1.1 action 32 How to configure flow director to receive all packets with dst-ip = 1.1.1.1 on qpair=32? Will TCP SYN packets caught by such filter setup? 3. Do we have a possibility to setup a rule like: Forward all TCPv4 rx packets with dst-ip =1.1.1.1 and TCP port 2222 to qpair=32 including SYN packets? 3. In your application example you present that qpair number (32) is known before start of application > > > > > > > ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3 -n 4 \ > > > > > > > --vdev=rte_bifurc,iface=eth0,qpairs=1 -- \ > > > > > > > -i --rxfreet=32 --txfreet=32 --txrst=32 Is there a possibility to dynamic queue allocation? I ask about API. I mean dynamic attaching and detaching queue from application level and not specifying the numbers in the command line. 4. Is there a possibility to create a rule with perfect match and directing the packets to the specific queue. I mean here a rule like: Forward all TCPv4 rx packets with dst-ip=1.1.1.1 src-ip=2.2.2.2 dst-port=2222 src-port=1234 to queue 33 Regards, Mirek > -----Original Message----- > From: Zhou, Danny > Sent: Tuesday, November 25, 2014 4:23 PM > To: Richardson, Bruce; Walukiewicz, Miroslaw > Cc: dev at dpdk.org > Subject: RE: [dpdk-dev] [RFC PATCH 0/6] DPDK support to bifurcated driver > > > > > -----Original Message----- > > From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Bruce Richardson > > Sent: Tuesday, November 25, 2014 11:03 PM > > To: Walukiewicz, Miroslaw > > Cc: dev at dpdk.org > > Subject: Re: [dpdk-dev] [RFC PATCH 0/6] DPDK support to bifurcated driver > > > > On Tue, Nov 25, 2014 at 02:57:13PM +0000, Walukiewicz, Miroslaw wrote: > > > Thank you Bruce for explanation of the idea. > > > > Actually, credit goes to Steve Liang, not me, for the explanation. :-) > > > > > > > > I have question regarding TCP SYN packets? Do you have any idea how to > share the TCP SYN requests between kernel and > > user-space application? > > > > As I'm giving the credit to Steve, I'll also pass the buck for answering > > that > > question to him too! :-) > > > > /Bruce > > On ixgbe' Rx queuing flow, match SYN filter stage is prior to Flow Director > filter stage. When working at bifurcated driver support mode, > DPDK cannot access those NIC registers except for the ones that are used to > rx/tx packets for assigned rx/tx queue pairs. So basically it really > depends on user to use ethtool or other interface to setup SYN filter via > ixgbe bifurcated driver. User can distribute TCP SYN packets to > kernel bifurcated driver owned rx queues or DPDK owned rx queues, for the > latter case, DPDK can still push them back to kernel via KNI if DPDK > does not want to use them. If you have a user space TCP/IP stacks on top of > DPDK, you can push them to the upper level stack rather instead. > > > > > > > Regards, > > > > > > Mirek > > > > > > > -----Original Message----- > > > > From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Bruce > Richardson > > > > Sent: Tuesday, November 25, 2014 3:30 PM > > > > To: Neil Horman > > > > Cc: dev at dpdk.org > > > > Subject: Re: [dpdk-dev] [RFC PATCH 0/6] DPDK support to bifurcated > driver > > > > > > > > On Tue, Nov 25, 2014 at 09:23:16AM -0500, Neil Horman wrote: > > > > > On Tue, Nov 25, 2014 at 10:11:16PM +0800, Cunming Liang wrote: > > > > > > > > > > > > This is a RFC patch set to support "bifurcated driver" in DPDK. > > > > > > > > > > > > > > > > > > What is "bifurcated driver"? > > > > > > =========================== > > > > > > > > > > > > The "bifurcated driver" stands for the kernel NIC driver that > supports: > > > > > > > > > > > > 1. on-demand rx/tx queue pairs split-off and assignment to user > space > > > > > > > > > > > > 2. direct NIC resource(e.g. rx/tx queue registers) access from user > space > > > > > > > > > > > > 3. distributing packets to kernel or user space rx queues by > > > > > > NIC's flow director according to the filter rules > > > > > > > > > > > > Here's the kernel patch set to support. > > > > > > http://comments.gmane.org/gmane.linux.network/333615 > > > > > > > > > > > > > > > > > > Usage scenario > > > > > > ================= > > > > > > > > > > > > It's well accepted by industry to use DPDK to process fast path > packets in > > > > > > user space in a high performance fashion, meanwhile processing > slow > > > > path > > > > > > control packets in kernel space is still needed as those packets > usually > > > > > > rely on in_kernel TCP/IP stacks and/or socket programming > interface. > > > > > > > > > > > > KNI(Kernel NIC Interface) mechanism in DPDK is designed to meet > this > > > > > > requirement, with below limitation: > > > > > > > > > > > > 1) Software classifies packets and distributes them to kernel via > DPDK > > > > > > software rings, at the cost of significant CPU cycles and > > > > > > memory > > > > bandwidth. > > > > > > > > > > > > 2) Memory copy packets between kernel' socket buffer and mbuf > brings > > > > > > significant negative performance impact to KNI performance. > > > > > > > > > > > > The bifurcated driver provides a alternative approach that not only > > > > offloads > > > > > > flow classification and distribution to NIC but also support packets > > > > zero_copy. > > > > > > > > > > > > User can use standard ethtool to add filter rules to the NIC in > > > > > > order > to > > > > > > distribute specific flows to the queues only accessed by kernel > driver and > > > > > > stack, and add other rules to distribute packets to the queues > assigned to > > > > > > user-space. > > > > > > > > > > > > For those rx/tx queue pairs that directly accessed from user space, > > > > > > DPDK takes over the packets rx/tx as well as corresponding DMA > > > > operation > > > > > > for high performance packet I/O. > > > > > > > > > > > > > > > > > > What's the impact and change to DPDK > > > > > > ====================================== > > > > > > > > > > > > DPDK usually binds PCIe NIC devices by leveraging kernel' user > space > > > > driver > > > > > > mechanism UIO or VFIO to map entire NIC' PCIe I/O space of NIC to > user > > > > space. > > > > > > The bifurcated driver PMD talks to a NIC interface using raw socket > APIs > > > > and > > > > > > only mmap() limited I/O space (e.g. certain 4K pages) for accessing > > > > involved > > > > > > rx/tx queue pairs. So the impact and changes mainly comes with > below: > > > > > > > > > > > > - netdev > > > > > > DPDK needs to create a af_packet socket and bind it to a > bifurcated > > > > netdev. > > > > > > The socket fd will be used to request 'queue pairs info', > > > > > > 'split/return queue pairs' and etc. The PCIe device ID, netdev > > > > > > MAC > > > > address, > > > > > > numa info are also from the netdev response. > > > > > > > > > > > > - PCIe device scan and driver probe > > > > > > netdev provides the PCIe device ID information. Refer to the > device ID, > > > > > > the correct driver should be used. And for such netdev device, > the > > > > creation > > > > > > of PCIe device is no longer from scan but the on-demand > assignment. > > > > > > > > > > > > - PCIe BAR mapping > > > > > > "bifurcated driver" maps several pages for the queue pairs. > > > > > > Others BAR register space maps to a fake page. The BAR mapping > go > > > > through > > > > > > mmap on sockfd. Which is a little different from what UIO/VFIO > does. > > > > > > > > > > > > - PMD > > > > > > The PMD will no longer really initialize and configure NIC. > > > > > > Instead, it only takes care the queue pair setup, rx_burst and > tx_burst. > > > > > > > > > > > > The patch uses eal '--vdev' parameter to assign netdev iface name > and > > > > number of > > > > > > queue pairs. Here's a example about how to configure the > bifurcated > > > > driver and > > > > > > run DPDK testpmd with bifurcated PMD. > > > > > > > > > > > > 1. Set promisc mode > > > > > > > ifconfig eth0 promisc > > > > > > > > > > > > 2. Turn on fdir > > > > > > > ethtool -K eth0 ntuple on > > > > > > > > > > > > 3. Setup a flow director rule to distribute packets with source ip > > > > > > 0.0.0.0 to rxq No.0 > > > > > > > ethtool -N eth0 flow-type udp4 src-ip 0.0.0.0 action 0 > > > > > > > > > > > > 4. Run testpmd on netdev 'eth0' with 1 queue pair. > > > > > > > ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3 -n 4 \ > > > > > > > --vdev=rte_bifurc,iface=eth0,qpairs=1 -- \ > > > > > > > -i --rxfreet=32 --txfreet=32 --txrst=32 > > > > > > Note: > > > > > > iface and qpairs arguments above specify the netdev interface > name > > > > and > > > > > > number of qpairs that user space request from the "bifurcated > driver" > > > > > > respectively. > > > > > > > > > > > > 5. Setup a flow director rule to distribute packets with source ip > > > > > > 1.1.1.1 to rxq No.32. This needs to be done after testpmd > > > > > > starts. > > > > > > > ethtool -N eth0 flow-type udp4 src-ip 1.1.1.1 action 32 > > > > > > > > > > > > Below illustrates the detailed changes in this patch set. > > > > > > > > > > > > eal > > > > > > -------- > > > > > > The first two patches are all about the eal API declaration and > > > > > > Linux > > > > version > > > > > > definition to support af_packet socket and verbs of bifurcated > netdev. > > > > > > Those APIs include the verbs like open, bind, (un)map, > > > > > > split/retturn, > > > > map_umem. > > > > > > And other APIs like set_pci, get_ifinfo and get/put_devargs which > help to > > > > > > generate pci device from bifurcated netdev and get basic netdev > info. > > > > > > > > > > > > The third patch is used to allow probing driver on the PCIe VDEV > created > > > > from > > > > > > a NIC interface driven by "bifurcated driver". It defines a new flag > > > > > > 'RTE_PCI_DRV_BIFURC' used for direct ring access PMD. > > > > > > > > > > > > librte_bifurc > > > > > > --------------- > > > > > > The library is used as a VDEV bus driver to scan '--vdev=rte_bifurc' > VDEV > > > > > > from eal command-line. It generates the PCIe VDEV device ready > for > > > > further > > > > > > driver probe. It maintains the bifurcated device information include > > > > sockfd, > > > > > > hwaddr, mtu, qpairs, iface_name. It's used for other direct ring > access > > > > PMD > > > > > > to apply for bifurcated device info. > > > > > > > > > > > > direct ring access PMD > > > > > > ------------------------- > > > > > > The patch provides direct ring access PMD for ixgbe. Comparing to > the > > > > normal > > > > > > PMD ixgbe, it uses 'RTE_PCI_DRV_BIFURC' flag during self > registration. > > > > > > It mostly reuses the existing PMD ops to avoid re-implementing > > > > everything > > > > > > from scratch. And it also modifies the rx/tx_queue_setup to allow > queue > > > > > > setup from any queue offset. > > > > > > > > > > > > Supported NIC driver > > > > > > ======================== > > > > > > > > > > > > The "bifurcated driver" kernel patch only supports "ixgbe" driver at > the > > > > moment, > > > > > > so this RFC patch also provides "ixgbe" PMD via direct-mapped rings > as > > > > sample. > > > > > > The support for 40GE(i40e) will be added in the future. > > > > > > > > > > > > In addition, for those multi-queues enabled NIC with flow director > > > > capability > > > > > > to do perform packet classification and distribution, there's no > special > > > > > > technical gap to provide bifurcated driver approach support. > > > > > > > > > > > > Limitation > > > > > > ============ > > > > > > > > > > > > By using "bifurcated driver", user space only takes over the DMA > > > > operation. > > > > > > For those NIC configure setting, it's out of control from user space > PMD. > > > > > > All the NIC setting including add/del filter rules need to be done > > > > > > by > > > > > > standard Linux network tools(e.g. ethtool). > > > > > > So the feature support really depend on how much are supported > by > > > > ethtool. > > > > > > > > > > > > > > > > > > Any questions, comments and feedback are welcome. > > > > > > > > > > > > > > > > > > -END- > > > > > > > > > > > > Signed-off-by: Cunming Liang <cunming.liang at intel.com> > > > > > > Signed-off-by: Danny Zhou <danny.zhou at intel.com> > > > > > > > > > > > > *** BLURB HERE *** > > > > > > > > > > > > Cunming Liang (6): > > > > > > eal: common direct ring access API > > > > > > eal: direct ring access support by linux af_packet > > > > > > pci: allow VDEV as pci device during device driver probe > > > > > > bifurc: add driver to scan bifurcated netdev > > > > > > ixgbe: rx/tx queue stop bug fix > > > > > > ixgbe: PMD for bifurc ixgbe net device > > > > > > > > > > > > config/common_linuxapp | 5 + > > > > > > lib/Makefile | 1 + > > > > > > lib/librte_bifurc/Makefile | 58 +++++ > > > > > > lib/librte_bifurc/rte_bifurc.c | 284 > +++++++++++++++++++++ > > > > > > lib/librte_bifurc/rte_bifurc.h | 90 +++++++ > > > > > > lib/librte_eal/common/Makefile | 5 + > > > > > > lib/librte_eal/common/include/rte_pci.h | 4 + > > > > > > lib/librte_eal/common/include/rte_pci_bifurc.h | 186 > ++++++++++++++ > > > > > > lib/librte_eal/linuxapp/eal/Makefile | 1 + > > > > > > lib/librte_eal/linuxapp/eal/eal_pci.c | 42 ++-- > > > > > > lib/librte_eal/linuxapp/eal/eal_pci_bifurc.c | 336 > > > > +++++++++++++++++++++++++ > > > > > > lib/librte_ether/rte_ethdev.c | 3 +- > > > > > > lib/librte_pmd_ixgbe/Makefile | 13 +- > > > > > > lib/librte_pmd_ixgbe/ixgbe_bifurcate.c | 303 > > > > ++++++++++++++++++++++ > > > > > > lib/librte_pmd_ixgbe/ixgbe_bifurcate.h | 57 +++++ > > > > > > lib/librte_pmd_ixgbe/ixgbe_rxtx.c | 44 +++- > > > > > > lib/librte_pmd_ixgbe/ixgbe_rxtx.h | 10 + > > > > > > mk/rte.app.mk | 6 + > > > > > > 18 files changed, 1421 insertions(+), 27 deletions(-) > > > > > > create mode 100644 lib/librte_bifurc/Makefile > > > > > > create mode 100644 lib/librte_bifurc/rte_bifurc.c > > > > > > create mode 100644 lib/librte_bifurc/rte_bifurc.h > > > > > > create mode 100644 > lib/librte_eal/common/include/rte_pci_bifurc.h > > > > > > create mode 100644 lib/librte_eal/linuxapp/eal/eal_pci_bifurc.c > > > > > > create mode 100644 lib/librte_pmd_ixgbe/ixgbe_bifurcate.c > > > > > > create mode 100644 lib/librte_pmd_ixgbe/ixgbe_bifurcate.h > > > > > > > > > > > > -- > > > > > > 1.8.1.4 > > > > > > > > > > > > > > > > > AIUI, the bifurcated driver hasn't yet been accepted upstream, has it? > > > > Given > > > > > that, I don't think its wise to pull this in yet ahead of the kernel > > > > > work, > as > > > > > there may still be kernel side changes that the user space pmd will > have to > > > > > adapt to. > > > > > Neil > > > > > > > > > Hence the RFC nature of the patch, I believe. :-) Before the kernel part > hits > > > > the > > > > main kernel tree we can at least discuss the overall direction to be > taken for > > > > this driver because it's significantly different that any other HW > > > > driver. > > > > > > > > /Bruce
