Rashmin,
Since I do need the jumbo, I use the vmxnet3-plugin you described, i.e.
(1)
sudo insmod ./vmxnet3-usermap.ko enable_shm=2,2 num_rqs=1,1 num_rxds=2048
num_txds=2048
and (2) when running the application, use in the args list:
"-d", "librte_pmd_vmxnet3.so"
Does the above two piece mean vmxnet3-plugin
I do see my vmxnet3 device from the dump, rte_eal_pci_dump();
but the 'nb_ports' in DPDK never gets incremented rte_eth_dev_count()
returns zero.
so all the other api fails, if (port_id >= nb_ports) {
PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
return;
}
0000:03:00.0 - vendor:15ad device:7b0
00000000d2404000 0000000000001000
00000000d2403000 0000000000001000
00000000d2400000 0000000000002000
0000000000000000 0000000000000000
0000000000000000 0000000000000000
0000000000000000 0000000000000000
00000000d4400000 0000000000010000
0000:0b:00.0 - vendor:15ad device:7b0
00000000d2504000 0000000000001000
00000000d2503000 0000000000001000
00000000d2500000 0000000000002000
0000000000000000 0000000000000000
0000000000000000 0000000000000000
0000000000000000 0000000000000000
00000000d4500000 0000000000010000
DPDK: No Ethernet ports (rte_eth_dev_count() returns zero)
PMD: rte_eth_dev_info_get: Invalid port_id=0
PMD: rte_eth_dev_configure: Invalid port_id=0
PMD: rte_eth_dev_info_get: Invalid port_id=0
PMD: rte_eth_dev_configure: Invalid port_id=0
So when using not using DPDK PMD for VMXNET3, what am i missing, for the
the DPDK to know the nb_ports,
How will the rte_eth_dev_start(portid) in DPDK library know ?
rte_pmd_init_all() will not have the init the Intel DPDK PMD ,
RTE_LIBRTE_VMXNET3_PMD = n in config.
#ifdef RTE_LIBRTE_VMXNET3_PMD
if ((ret = rte_vmxnet3_pmd_init()) != 0) {
RTE_LOG(ERR, PMD, "Cannot init vmxnet3 PMD\n");
return (ret);
}
If I make RTE_LIBRTE_VMXNET3_PMD = y, then I am using the Intel DPDK PMD
and no jumbo.
Thanks,
aziz
On Fri, Nov 7, 2014 at 8:53 AM, Patel, Rashmin N <rashmin.n.patel at intel.com>
wrote:
> Hi Aziz,
>
> Yes, you're right DPDK VMXNET3-PMD in /lib/librte_pmd_vmxnet3 does not
> support mbuf chaining today. But it's a standalone bsd driver just like any
> other pmd in that directory, it does not need vmxnet3-usermap.ko module.
>
> Now there is another vmxnet3 solution in a separate branch as a plugin,
> which must have vmxnet3-usermap.ko linux module(1), and a user space
> interface piece(2) to tie it to any DPDK application in the main branch.
> (1) and (2) makes the solution which is known as vmxnet3-plugin. It's been
> there for a long time just like virtio-plugin, I don't know who uses it,
> but community can *reply* here if there is still any need of a separate
> solution that way.
>
> I'm in favor of consolidating all those version into one elegant solution
> by grabbing best features from all of them and maintain one copy. I'm sure
> that developers contributing from VMware would also support that idea
> because then it makes easy to maintain and debug and bug fix and most
> importantly avoid such confusion in future.
>
> Thanks,
> Rashmin
>
> -----Original Message-----
> From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Aziz Hajee
> Sent: Thursday, November 06, 2014 5:47 PM
> To: dev at dpdk.org
> Subject: [dpdk-dev] vmware vmxnet3-usermap AND DPDK VMXNET3 PMD
>
> I am using the dpdk1.6.0r1
> I could not find a complete clarification, sorry if missed.
> VMXNET3 PMD
> ============
> I have enabled the VMXNET3 PMD in the dpdk.
> # Compile burst-oriented VMXNET3 PMD driver #
>
> CONFIG_RTE_LIBRTE_VMXNET3_PMD=y
> CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_INIT=y
> CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_RX=n
> CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX=n
> CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n
> The Intel DPDK VMXNET3 PMD driver does not support mbuf chaining, and I
> have to set NOMULTSEGS for the vmxnet3 interface init to succeed.
> tx_conf.txq_flags = ETH_TXQ_FLAGS_NOMULTSEGS Is there a later version of
> DPDK that supports multiseg for the dpdk
> VMXNET3 PMD.
>
> vmware vmxnet3-usermap AND DPDK VMXNET3 PMD
> =========================================
> Is the vmxnet3-usermap.ko module driver also needed ? (appears that I
> need, otherwise the eal initialise fails.
> sudo insmod ./vmxnet3-usermap.ko enable_shm=2,2 num_rqs=1,1 num_rxds=2048
> num_txds=2048
>
> I do not understand if VMXNET3 PMD is there, what is the purpose of
> /vmxnet3-usermap.ko/vmxnet3-usermap.ko ?
>
> From some responses i saw that the following ifdef RTE_EAL_UNBIND_PORTS is
> also need to be removed in lib/librte_pmd_vmxnet3/vmxnet3_ethdev.c ?
> {
> .name = "rte_vmxnet3_pmd",
> .id_table = pci_id_vmxnet3_map, -#ifdef RTE_EAL_UNBIND_PORTS
> +// #ifdef RTE_EAL_UNBIND_PORTS
> .drv_flags = RTE_PCI_DRV_NEED_IGB_UIO, -#endif
> +// #endif
> },
> .eth_dev_init = eth_vmxnet3_dev_init,
> .dev_private_size = sizeof(struct vmxnet3_adapter),
>
> thanks,
> -aziz
>
