Hi, These tests don't seem related to the patchset. It would be more interesting to test vlan, stop/restart, Rx checks and Rx performance improvement.
-- Thomas 2014-11-04 05:57, Zhang, XiaonanX: > Tested-by: Xiaonan Zhang <xiaonanx.zhang at intel.com> > > - Tested Commit: Yong Wang > - OS: Fedora20 3.15.8-200.fc20.x86_64 > - GCC: gcc version 4.8.3 20140624 > - CPU: Intel(R) Xeon(R) CPU E5-2680 v2 @ 2.80GHz > - NIC: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection > [8086:10fb] > - Default x86_64-native-linuxapp-gcc configuration > - Total 6 cases, 6 passed, 0 failed > - Test Environment setup > > - Topology #1: Create 2VMs (Fedora 20, 64bit);for each VM, pass through one > physical port(Niantic 82599) to VM, and also create one virtual device: > vmxnet3 in VM. Between two VMs, use one vswitch to connect 2 vmxnet3. In > summary, PF1 > and vmxnet3A are in VM1; PF2 and vmxnet3B are in VM2.The > traffic flow for l2fwd/l3fwd is as below: > Ixia -> PF1 -> vmxnet3A -> vswitch -> vmxnet3B -> PF2 -> Ixia. > - Topology #2: Create 1VM (Fedora 20, 64bit), on this VM, created 2 vmxnet3, > called vmxnet3A, vmxnet3B; create 2 vswitch, vswitchA connecting PF1 and > vmxnet3A, while vswitchB connecting PF2 and vmxnet3B. The traffic flow is as > below: > Ixia -> PF1 -> vswitchA -> vmxnet3A -> vmxnet3B -> vswitchB -> > PF2 -> Ixia. > > - Test Case1: L2fwd with Topology#1 > Description: Set up topology#1(in prerequisite session), and bind PF1, PF2, > Vmxnet3A, vmxnet3B to DPDK poll-mode driver (igb_uio). > Increase the flow at line rate (uni-directional traffic), send > the flow at different packet size (64bytes, 128bytes, 256bytes, 512bytes, > 1024bytes, 1280bytes and 1518bytes) and check the received packets/rate to > see > if any unexpected behavior, such as no receives after N > packets. > Command / instruction: > To run the l2fwd example in 2VMs: > ./build/l2fwd -c f -n 4 -- -p 0x3 > - Test IXIA Flow prerequisite: Ixia port1 sends 5 packets to PF1, and the > flow should have PF1's MAC as destination MAC. Check if ixia port2 have > received the 5 packets. > Expected test result: > Passed > > - Test Case2: L3fwd-VF with Topology#1 > Description: Set up topology#1(in prerequisite session), and bind PF1, PF2, > Vmxnet3A, vmxnet3B to DPDK poll-mode driver (igb_uio) > Increase the flow at line rate (uni-directional traffic), send > the flow at different packet size (64bytes, 128bytes, 256bytes, 512bytes, > 1024bytes, 1280bytes and 1518bytes) and check the received packets/rate to > see > if any unexpected behavior, such as no receives after N > packets. > Command / instruction: > To run the l3fwd-vf example in 2VMs: > ./build/l3fwd-vf -c 0x6 -n 4 -- -p 0x3 > --config "(0,0,1),(1,0,2)" > - Test IXIA Flow prerequisite: Ixia port1 sends 5 packets to PF1, and the > flow should have PF1's MAC as destination MAC and have 2.1.1.x as destination > IP. Check if ixia port2 have received the 5 packets. > Expected test result: > Passed > > - Test Case3: L2fwd with Topology#2 > Description: Set up topology#2(in prerequisite session), and bind vmxnet3A > and vmxnet3B to DPDK poll-mode driver (igb_uio). > Increase the flow at line rate (uni-directional traffic), send > the flow at different packet size (64bytes, 128bytes, 256bytes, 512bytes, > 1024bytes, 1280bytes and 1518bytes) and check the received packets/rate to > see > if any unexpected behavior, such as no receives after N > packets. > Command / instruction: > To run the l2fwd example in VM1: > ./build/l2fwd -c f -n 4 -- -p 0x3 > - Test IXIA Flow prerequisite: Ixia port1 sends 5 packets to port0 > (vmxnet3A), and the flow should have port0's MAC as destination MAC. Check if > ixia port2 have received the 5 packets. Similar things need to be done at > ixia port2. > Expected test result: > Passed > > - Test Case4: L3fwd-VF with Topology#2 > Description: Set up topology#2(in prerequisite session), and bind vmxnet3A > and vmxnet3B to DPDK poll-mode driver (igb_uio). > Increase the flow at line rate (uni-directional traffic), send > the flow at different packet size (64bytes, 128bytes, 256bytes, 512bytes, > 1024bytes, 1280bytes and 1518bytes) and check the received packets/rate to > see > if any unexpected behavior, such as no receives after N > packets. > Command / instruction: > To run the l3fwd-vf example in VM1: > ./build/l3fwd-vf -c 0x6 -n 4 -- -p 0x3 > --config "(0,0,1),(1,0,2)" > - Test IXIA Flow prerequisite: Ixia port1 sends 5 packets to port0(vmxnet3A), > and the flow should have port0's MAC as destination MAC and have 2.1.1.x as > destination IP. Check if ixia port2 have received the 5 packets. > > Expected test result: > Passed > > - Test Case5: Timer test with Topology#2 > Description: Set up topology#2(in prerequisite session), and bind vmxnet3A > and vmxnet3B to DPDK poll-mode driver (igb_uio). > Command / instruction: > Build timer sample and run the sample: > ./build/timer -c f -n 4 > - Test IXIA Flow prerequisite: N.A. > > Expected test result: > Passed > > - Test Case6: Testpmd basic with Topology#2 > Description: Set up topology#2(in prerequisite session), and bind vmxnet3A > and vmxnet3B to DPDK poll-mode driver (igbuio). > Increase the flow at line rate (uni-directional traffic), send > the flow at different packet size (64bytes, 128bytes, 256bytes, 512bytes, > 1024bytes, 1280bytes and 1518bytes) and check the received packets/rate to > see > if any unexpected behavior, such as no receives after N > packets. > Command / instruction: > Run testpmd(e.g:/x86_64-native-linuxapp-gcc/app/testpmd) with > below command lines: > ./testpmd -c f -n 4 -- --txqflags=0xf01 -i > Clean environment and start the forwarding. Need check the > port information and clear port statics by using below commands: > Testpmd>show port info all > Testpmd>clear port stats all > Testpmd>show port stats all > Testpmd>set fwd mac > Testpmd>start > - Test IXIA Flow prerequisite: N.A. > Expected test result: > Passed > > -----Original Message----- > From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Yong Wang > Sent: Monday, October 13, 2014 2:23 PM > To: dev at dpdk.org > Subject: [dpdk-dev] [PATCH 0/5] vmxnet3 pmd fixes/improvement > > This patch series include various fixes and improvement to the > vmxnet3 pmd driver. > > Yong Wang (5): > vmxnet3: Fix VLAN Rx stripping > vmxnet3: Add VLAN Tx offload > vmxnet3: Fix dev stop/restart bug > vmxnet3: Add rx pkt check offloads > vmxnet3: Some perf improvement on the rx path > > lib/librte_pmd_vmxnet3/vmxnet3_rxtx.c | 310 > +++++++++++++++++++++------------- > 1 file changed, 195 insertions(+), 115 deletions(-)
