Prashant,
Are you still hitting a crash? Do you have hugetlbfs
enabled? if not try adding enabling hugetlbfs. I was able to get
vxnet3 up using the vmxnet3 pmd alone in DPDK 1.60r1. I did not use
the vmxnet3-usermap kernel driver. I am using Esxi 5.5
Eg: echo 1024 > /proc/sys/vm/nr_hugepages; mkdir /huge; mount -t
hugetlbfs nodev /huge;
On Thu, Mar 6, 2014 at 12:48 PM, Prashant Upadhyaya
<prashant.upadhyaya at aricent.com> wrote:
> And if it is any help, here is the startup log --
>
> EAL: Detected lcore 0 as core 0 on socket 0
> EAL: Detected lcore 1 as core 1 on socket 0
> EAL: Detected lcore 2 as core 2 on socket 0
> EAL: Detected lcore 3 as core 3 on socket 0
> EAL: Detected lcore 4 as core 4 on socket 0
> EAL: Detected lcore 5 as core 5 on socket 0
> EAL: Detected lcore 6 as core 6 on socket 0
> EAL: Detected lcore 7 as core 7 on socket 0
> EAL: Skip lcore 8 (not detected)
> EAL: Skip lcore 9 (not detected)
> EAL: Skip lcore 10 (not detected)
> EAL: Skip lcore 11 (not detected)
> EAL: Skip lcore 12 (not detected)
> EAL: Skip lcore 13 (not detected)
> EAL: Skip lcore 14 (not detected)
> EAL: Skip lcore 15 (not detected)
> EAL: Skip lcore 16 (not detected)
> EAL: Skip lcore 17 (not detected)
> EAL: Skip lcore 18 (not detected)
> EAL: Skip lcore 19 (not detected)
> EAL: Skip lcore 20 (not detected)
> EAL: Skip lcore 21 (not detected)
> EAL: Skip lcore 22 (not detected)
> EAL: Skip lcore 23 (not detected)
> EAL: Skip lcore 24 (not detected)
> EAL: Skip lcore 25 (not detected)
> EAL: Skip lcore 26 (not detected)
> EAL: Skip lcore 27 (not detected)
> EAL: Skip lcore 28 (not detected)
> EAL: Skip lcore 29 (not detected)
> EAL: Skip lcore 30 (not detected)
> EAL: Skip lcore 31 (not detected)
> EAL: Skip lcore 32 (not detected)
> EAL: Skip lcore 33 (not detected)
> EAL: Skip lcore 34 (not detected)
> EAL: Skip lcore 35 (not detected)
> EAL: Skip lcore 36 (not detected)
> EAL: Skip lcore 37 (not detected)
> EAL: Skip lcore 38 (not detected)
> EAL: Skip lcore 39 (not detected)
> EAL: Skip lcore 40 (not detected)
> EAL: Skip lcore 41 (not detected)
> EAL: Skip lcore 42 (not detected)
> EAL: Skip lcore 43 (not detected)
> EAL: Skip lcore 44 (not detected)
> EAL: Skip lcore 45 (not detected)
> EAL: Skip lcore 46 (not detected)
> EAL: Skip lcore 47 (not detected)
> EAL: Skip lcore 48 (not detected)
> EAL: Skip lcore 49 (not detected)
> EAL: Skip lcore 50 (not detected)
> EAL: Skip lcore 51 (not detected)
> EAL: Skip lcore 52 (not detected)
> EAL: Skip lcore 53 (not detected)
> EAL: Skip lcore 54 (not detected)
> EAL: Skip lcore 55 (not detected)
> EAL: Skip lcore 56 (not detected)
> EAL: Skip lcore 57 (not detected)
> EAL: Skip lcore 58 (not detected)
> EAL: Skip lcore 59 (not detected)
> EAL: Skip lcore 60 (not detected)
> EAL: Skip lcore 61 (not detected)
> EAL: Skip lcore 62 (not detected)
> EAL: Skip lcore 63 (not detected)
> EAL: Setting up memory...
> EAL: Ask a virtual area of 0x80000000 bytes
> EAL: Virtual area found at 0x7f848ae00000 (size = 0x80000000)
> EAL: Requesting 1024 pages of size 2MB from socket 0
> EAL: TSC frequency is ~2000000 KHz
> EAL: Master core 0 is ready (tid=b3f3f00)
> EAL: Core 1 is ready (tid=8a1f2700)
> EAL: Core 2 is ready (tid=899f1700)
> EAL: Core 3 is ready (tid=891f0700)
> EAL: Core 4 is ready (tid=889ef700)
> EAL: Core 5 is ready (tid=7bfff700)
> EAL: Core 6 is ready (tid=7b7fe700)
> EAL: Core 7 is ready (tid=7affd700)
> Pool initialized
> Global Variables initialized
> PMD: rte_vmxnet3_pmd_init(): >>
> EAL: PCI device 0000:0b:00.0 on NUMA socket -1
> EAL: probe driver: 15ad:7b0 rte_vmxnet3_pmd
> PMD: eth_vmxnet3_dev_init(): >>
> Segmentation fault (core dumped)
>
> -----Original Message-----
> From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Prashant Upadhyaya
> Sent: Thursday, March 06, 2014 12:20 PM
> To: David Marchand
> Cc: dev at dpdk.org
> Subject: Re: [dpdk-dev] Which vmxnet3 pmd is to be used in dpdk 1.6.x?
>
> Hi,
>
> Some further update on the crash I am facing.
> I am using DPDK1.6.0r1 and take over the vmxnet3 with igb_uio and then start
> the application. (so no external ko or vmxnet usermap etc.) During the port
> initializations, the crash is happening in the following function -
>
> eth_vmxnet3_dev_init
>
> and the crash is happening at the following line -
> /* Check h/w version compatibility with driver. */
> ver = VMXNET3_READ_BAR1_REG(hw, VMXNET3_REG_VRRS);
>
> Any hints regarding what could be wrong ?
>
> Regards
> -Prashant
>
>
> From: Prashant Upadhyaya
> Sent: Wednesday, March 05, 2014 9:01 PM
> To: 'David Marchand'
> Cc: Srinivasan J; dev at dpdk.org
> Subject: RE: [dpdk-dev] Which vmxnet3 pmd is to be used in dpdk 1.6.x?
>
> Hi David,
>
> The compilation error with debug flags on was that the functions --
> vmxnet3_txq_dump, vmxnet3_rxq_dump - are defined but not used.
> Not a serious error, I will try to get rid of the compiler flag which
> generates this.
>
> However, I must reiterate, I _did_ bind my vmxnet3 device with igb_uio (and I
> did not use any .so, because I was intending to use the builtin vmxnet3
> driver of dpdk 1.6.0r1), the bind succeeded, but then when I started the
> application, the dev init for vmxnet3 gave a core dump.
> Your patch and solution seems to be suggesting the reverse, i.e. when I don't
> bind with igb_uio but try to use the native driver. So please do try the
> above combination as well.
>
> Regards
> -Prashant
>
>
> From: David Marchand [mailto:david.marchand at 6wind.com]
> Sent: Wednesday, March 05, 2014 8:41 PM
> To: Prashant Upadhyaya
> Cc: Srinivasan J; dev at dpdk.org<mailto:dev at dpdk.org>
> Subject: Re: [dpdk-dev] Which vmxnet3 pmd is to be used in dpdk 1.6.x?
>
> Hello Prashant,
>
> On Wed, Mar 5, 2014 at 3:28 PM, Prashant Upadhyaya <prashant.upadhyaya at
> aricent.com<mailto:prashant.upadhyaya at aricent.com>> wrote:
> Hi,
>
> I am also keen to know the answer to the question posted by Srini.
> The real question is -- is dpdk1.6.0r1 self-sufficient so that I don't need
> any extensions etc., or do I still need something from outside like the
> usermap kernel driver etc.
>
> Secondly, if I turn on all the debug options for the vmxnet3 pmd in the
> config file, 1.6.0r1 compilation runs into a problem and reports a function
> which is defined but not used.
>
> Can you send your build error ? (maybe in a separate thread ?)
>
>
> I am trying to bring up DPDK inside Fedora18 Guest on ESXi -- when I used
> DPDK1.6.0r1 (without debug options turned on for vmxnet3 pmd) the igb_uio
> could take over the vmxnet3 NIC but I encountered a core dump in the dev init
> function for the vmxnet3 driver -- anybody encountered a similar issue ?
>
> I encountered these problems as well.
>
> - igb_uio module does not check if you disable vmxnet3-uio pmds, it will
> always try to take over vmxnet3 devices.
> I have a patch waiting in my working dir to cleanly disable vmxnet3-uio pmd.
>
> - If you don't bind vmxnet3 devices to uio, but forget to enable
> vmxnet3-usermap pmd (by specifiying -d librte_pmd_vmxnet3.so), then internal
> vmxnet3-uio pmd will try to initialise and crash.
> I did not look any deeper into this, the easiest way is to disable
> vmxnet3-uio pmd + apply the patch I will send in a few minutes, as a first
> workaround.
>
>
> Regards,
> --
> David Marchand
>
>
>
>
> ===============================================================================
> Please refer to http://www.aricent.com/legal/email_disclaimer.html
> for important disclosures regarding this electronic communication.
> ===============================================================================
>
>
>
>
> ===============================================================================
> Please refer to http://www.aricent.com/legal/email_disclaimer.html
> for important disclosures regarding this electronic communication.
> ===============================================================================
