Hi, I am seeing very low throughput when I run l2fwd in a VM.
When I send 1g data, I could see only about 10mbps of traffic being received by the VM. I dont see this problem when running l2fwd on the host. I could get 10gbps traffic in and out of both the ports. My setup details are - Traffic coming in on a 10G interface(eth0) and going out on another 10G interface(eth1) - Both 10G NICs are 82599 - Created virtual functions eth5 and eth8 on eth0 and eth1 respectively - eth5 and eth8 are mapped to eth0 and eth1 in a VM, with device type as e1000 in Passthru mode. - Host OS : Centos 6.2, Guest OS : Ubuntu 12.04 <?> Network devices using IGB_UIO driver ==================================== 0000:00:07.0 '82540EM Gigabit Ethernet Controller' drv=igb_uio unused=e1000 0000:00:08.0 '82540EM Gigabit Ethernet Controller' drv=igb_uio unused=e1000 <?> The counters on the virtual interface (eth5/eth8) show all 10g traffic received, but I see very 10mbps worth traffic at the l2fwd app counters on the VM. I also see the following logs in the VM dmesg output. [75399.491215] irq 0xb not handled [75400.142025] irq 0xb not handled [75400.142150] irq 0xb not handled [75400.142913] irq 0xb not handled [75400.142920] irq 0xb not handled Has anyone seen this issue? Am I missing anything? Thanks, Surya
