Prepare for next commit.
Signed-off-by: David Marchand <david.marchand at 6wind.com>
---
app/test-pmd/cmdline.c | 74 ++++++++++++++++++++++++------------------------
1 file changed, 37 insertions(+), 37 deletions(-)
diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index 3d2a91a..8b85d4d 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -3823,43 +3823,6 @@ struct cmd_link_flow_ctrl_set_result {
uint8_t port_id;
};
-static void
-cmd_link_flow_ctrl_set_parsed(void *parsed_result,
- __attribute__((unused)) struct cmdline *cl,
- __attribute__((unused)) void *data)
-{
- struct cmd_link_flow_ctrl_set_result *res = parsed_result;
- struct rte_eth_fc_conf fc_conf;
- int rx_fc_enable, tx_fc_enable, mac_ctrl_frame_fwd;
- int ret;
-
- /*
- * Rx on/off, flow control is enabled/disabled on RX side. This can
indicate
- * the RTE_FC_TX_PAUSE, Transmit pause frame at the Rx side.
- * Tx on/off, flow control is enabled/disabled on TX side. This can
indicate
- * the RTE_FC_RX_PAUSE, Respond to the pause frame at the Tx side.
- */
- static enum rte_eth_fc_mode rx_tx_onoff_2_lfc_mode[2][2] = {
- {RTE_FC_NONE, RTE_FC_TX_PAUSE}, {RTE_FC_RX_PAUSE,
RTE_FC_FULL}
- };
-
- rx_fc_enable = (!strcmp(res->rx_lfc_mode, "on")) ? 1 : 0;
- tx_fc_enable = (!strcmp(res->tx_lfc_mode, "on")) ? 1 : 0;
- mac_ctrl_frame_fwd = (!strcmp(res->mac_ctrl_frame_fwd_mode, "on")) ? 1
: 0;
-
- fc_conf.mode = rx_tx_onoff_2_lfc_mode[rx_fc_enable][tx_fc_enable];
- fc_conf.high_water = res->high_water;
- fc_conf.low_water = res->low_water;
- fc_conf.pause_time = res->pause_time;
- fc_conf.send_xon = res->send_xon;
- fc_conf.mac_ctrl_frame_fwd = (uint8_t)mac_ctrl_frame_fwd;
- fc_conf.autoneg = (!strcmp(res->autoneg, "on")) ? 1 : 0;
-
- ret = rte_eth_dev_flow_ctrl_set(res->port_id, &fc_conf);
- if (ret != 0)
- printf("bad flow contrl parameter, return code = %d \n", ret);
-}
-
cmdline_parse_token_string_t cmd_lfc_set_set =
TOKEN_STRING_INITIALIZER(struct cmd_link_flow_ctrl_set_result,
set, "set");
@@ -3932,6 +3895,43 @@ autoneg on|off port_id",
},
};
+static void
+cmd_link_flow_ctrl_set_parsed(void *parsed_result,
+ __attribute__((unused)) struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ struct cmd_link_flow_ctrl_set_result *res = parsed_result;
+ struct rte_eth_fc_conf fc_conf;
+ int rx_fc_enable, tx_fc_enable, mac_ctrl_frame_fwd;
+ int ret;
+
+ /*
+ * Rx on/off, flow control is enabled/disabled on RX side. This can
indicate
+ * the RTE_FC_TX_PAUSE, Transmit pause frame at the Rx side.
+ * Tx on/off, flow control is enabled/disabled on TX side. This can
indicate
+ * the RTE_FC_RX_PAUSE, Respond to the pause frame at the Tx side.
+ */
+ static enum rte_eth_fc_mode rx_tx_onoff_2_lfc_mode[2][2] = {
+ {RTE_FC_NONE, RTE_FC_TX_PAUSE}, {RTE_FC_RX_PAUSE,
RTE_FC_FULL}
+ };
+
+ rx_fc_enable = (!strcmp(res->rx_lfc_mode, "on")) ? 1 : 0;
+ tx_fc_enable = (!strcmp(res->tx_lfc_mode, "on")) ? 1 : 0;
+ mac_ctrl_frame_fwd = (!strcmp(res->mac_ctrl_frame_fwd_mode, "on")) ? 1
: 0;
+
+ fc_conf.mode = rx_tx_onoff_2_lfc_mode[rx_fc_enable][tx_fc_enable];
+ fc_conf.high_water = res->high_water;
+ fc_conf.low_water = res->low_water;
+ fc_conf.pause_time = res->pause_time;
+ fc_conf.send_xon = res->send_xon;
+ fc_conf.mac_ctrl_frame_fwd = (uint8_t)mac_ctrl_frame_fwd;
+ fc_conf.autoneg = (!strcmp(res->autoneg, "on")) ? 1 : 0;
+
+ ret = rte_eth_dev_flow_ctrl_set(res->port_id, &fc_conf);
+ if (ret != 0)
+ printf("bad flow contrl parameter, return code = %d \n", ret);
+}
+
/* *** SETUP ETHERNET PIRORITY FLOW CONTROL *** */
struct cmd_priority_flow_ctrl_set_result {
cmdline_fixed_string_t set;
--
1.7.10.4
