icc 12.1 complains about RTE_LOG() format:
"argument is incompatible with corresponding format string conversion"
Signed-off-by: Konstantin Ananyev <konstantin.ananyev at intel.com>
---
lib/librte_ether/rte_ethdev.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index 47bcee1..301ff61 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -447,7 +447,8 @@ rte_eth_dev_check_mq_mode(uint8_t port_id, uint16_t
nb_rx_q, uint16_t nb_tx_q,
(dev_conf->rxmode.mq_mode == ETH_MQ_RX_DCB_RSS) ||
(dev_conf->txmode.mq_mode == ETH_MQ_TX_DCB)) {
/* SRIOV only works in VMDq enable mode */
- PMD_DEBUG_TRACE("ethdev port_id=%hhu SRIOV active, "
+ PMD_DEBUG_TRACE("ethdev port_id=%" PRIu8
+ " SRIOV active, "
"wrong VMDQ mq_mode rx %u tx %u\n",
port_id,
dev_conf->rxmode.mq_mode,
@@ -460,7 +461,8 @@ rte_eth_dev_check_mq_mode(uint8_t port_id, uint16_t
nb_rx_q, uint16_t nb_tx_q,
case ETH_MQ_RX_VMDQ_DCB:
case ETH_MQ_RX_VMDQ_DCB_RSS:
/* DCB/RSS VMDQ in SRIOV mode, not implement yet */
- PMD_DEBUG_TRACE("ethdev port_id=%hhu SRIOV active, "
+ PMD_DEBUG_TRACE("ethdev port_id=%" PRIu8
+ " SRIOV active, "
"unsupported VMDQ mq_mode rx %u\n",
port_id, dev_conf->rxmode.mq_mode);
return (-EINVAL);
@@ -475,7 +477,8 @@ rte_eth_dev_check_mq_mode(uint8_t port_id, uint16_t
nb_rx_q, uint16_t nb_tx_q,
switch (dev_conf->txmode.mq_mode) {
case ETH_MQ_TX_VMDQ_DCB:
/* DCB VMDQ in SRIOV mode, not implement yet */
- PMD_DEBUG_TRACE("ethdev port_id=%hhu SRIOV active, "
+ PMD_DEBUG_TRACE("ethdev port_id=%" PRIu8
+ " SRIOV active, "
"unsupported VMDQ mq_mode tx %u\n",
port_id, dev_conf->txmode.mq_mode);
return (-EINVAL);
@@ -758,7 +761,7 @@ rte_eth_dev_start(uint8_t port_id)
PROC_PRIMARY_OR_ERR_RET(-E_RTE_SECONDARY);
if (port_id >= nb_ports) {
- PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
+ PMD_DEBUG_TRACE("Invalid port_id=%" PRIu8 "\n", port_id);
return (-EINVAL);
}
dev = &rte_eth_devices[port_id];
@@ -793,7 +796,7 @@ rte_eth_dev_stop(uint8_t port_id)
PROC_PRIMARY_OR_RET();
if (port_id >= nb_ports) {
- PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
+ PMD_DEBUG_TRACE("Invalid port_id=%" PRIu8 "\n", port_id);
return;
}
dev = &rte_eth_devices[port_id];
--
1.8.3.1
