Two ops of 'check_command_supported' and 'rx_classification_filter_ctl'
are added.
* 'check_command_supported' is for capability discovery. In anothoer
word, it is to check if specific feature/command is supported by
the specific port.
* 'rx_classification_filter_ctl' is for receive classifcation filter
configuring. e.g. hash function configuration, flow director
configuration. It is a common API where a lot of commands can
be implemented for different sub features.
Signed-off-by: Helin Zhang <helin.zhang at intel.com>
---
lib/librte_ether/rte_ethdev.c | 31 ++++++++++++++++++++++++++
lib/librte_ether/rte_ethdev.h | 52 +++++++++++++++++++++++++++++++++++++++++++
2 files changed, 83 insertions(+)
diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index fd1010a..7afffb4 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -3002,3 +3002,34 @@ rte_eth_dev_get_flex_filter(uint8_t port_id, uint16_t
index,
return (*dev->dev_ops->get_flex_filter)(dev, index, filter,
rx_queue);
}
+
+int
+rte_eth_dev_check_command_supported(uint8_t port_id, uint32_t cmd)
+{
+ struct rte_eth_dev *dev;
+
+ if (port_id >= nb_ports) {
+ PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
+ return -ENODEV;
+ }
+ dev = &rte_eth_devices[port_id];
+ FUNC_PTR_OR_ERR_RET(*dev->dev_ops->check_command_supported, -ENOTSUP);
+ return (*dev->dev_ops->check_command_supported)(dev, cmd);
+}
+
+int
+rte_eth_dev_rx_classification_filter_ctl(uint8_t port_id,
+ uint32_t cmd,
+ void *args)
+{
+ struct rte_eth_dev *dev;
+
+ if (port_id >= nb_ports) {
+ PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
+ return -ENODEV;
+ }
+ dev = &rte_eth_devices[port_id];
+ FUNC_PTR_OR_ERR_RET(*dev->dev_ops->rx_classification_filter_ctl,
+ -ENOTSUP);
+ return (*dev->dev_ops->rx_classification_filter_ctl)(dev, cmd, args);
+}
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index a262463..482e64d 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -1240,6 +1240,15 @@ typedef int (*eth_mirror_rule_reset_t)(struct
rte_eth_dev *dev,
uint8_t rule_id);
/**< @internal Remove a traffic mirroring rule on an Ethernet device */
+typedef int (*eth_check_command_supported_t)(struct rte_eth_dev *dev,
+ uint32_t cmd);
+/**< @internal check if the command is supported by the Ethernet device */
+
+typedef int (*eth_rx_classification_filter_ctl_t)(struct rte_eth_dev *dev,
+ uint32_t cmd,
+ void *arg);
+/**< @internal receive classification filter control operations */
+
#ifdef RTE_NIC_BYPASS
enum {
@@ -1467,6 +1476,10 @@ struct eth_dev_ops {
eth_add_flex_filter_t add_flex_filter; /**< add flex
filter. */
eth_remove_flex_filter_t remove_flex_filter; /**< remove flex
filter. */
eth_get_flex_filter_t get_flex_filter; /**< get flex
filter. */
+ eth_check_command_supported_t check_command_supported;
+ /**< check if a command is supported. */
+ eth_rx_classification_filter_ctl_t rx_classification_filter_ctl;
+ /**< common control function of hw hash */
};
/**
@@ -3557,6 +3570,45 @@ int rte_eth_dev_remove_flex_filter(uint8_t port_id,
uint16_t index);
int rte_eth_dev_get_flex_filter(uint8_t port_id, uint16_t index,
struct rte_flex_filter *filter, uint16_t *rx_queue);
+/**
+ * Check if the command is supported by an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param cmd
+ * The command.
+ *
+ * @return
+ * - (> 0) The command is supported.
+ * - (0) The command is not supported.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-ENODEV) if <port_id> is invalid.
+ */
+int rte_eth_dev_check_command_supported(uint8_t port_id, uint32_t cmd);
+
+/**
+ * Control the receive classification filter, including hash function
+ * selection. The commands are NIC specific in its exported public
+ * header file. Different types of NIC may have different commands.
+ * For example, the supported commands for i40e can be found in rte_i40e.h.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param cmd
+ * The commands.
+ * @param args
+ * A pointer to arguments defined specifically for the command.
+ *
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-ENODEV) if <port_id> is invalid.
+ * - others depends on the specific command implementation.
+ */
+int rte_eth_dev_rx_classification_filter_ctl(uint8_t port_id,
+ uint32_t cmd,
+ void *args);
+
#ifdef __cplusplus
}
#endif
--
1.8.1.4
