Hi, How are you using it? I've successfully used it with vbox.
Cheers On Nov 13, 2013 7:17 PM, "Jyotiswarup Raiturkar" <jyotisr5 at googlemail.com> wrote: > hi > > I got my application running inside a vm (vmplayer) where the VM emulates a > e1000 NIC (82545EM). But rte_eth_dev_count() seems to return 0.. From the > website looks like it's a supported NIC . My lspci and pci_ubind status is > below. Any pointers? > > # ./tools/pci_unbind.py --status > > Network devices using IGB_UIO driver > ==================================== > 0000:02:06.0 '82545EM Gigabit Ethernet Controller (Copper)' drv=igb_uio > unused=e1000 > > Network devices using kernel driver > =================================== > 0000:02:01.0 '79c970 [PCnet32 LANCE]' if=eth1 drv=pcnet32 unused= *Active* > > Other network devices > ===================== > <none> > > > # lspci -vt > -[0000:00]-+-00.0 Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host > bridge > +-01.0-[01]-- > +-07.0 Intel Corporation 82371AB/EB/MB PIIX4 ISA > +-07.1 Intel Corporation 82371AB/EB/MB PIIX4 IDE > +-07.3 Intel Corporation 82371AB/EB/MB PIIX4 ACPI > +-07.7 VMware Virtual Machine Communication Interface > +-0f.0 VMware SVGA II Adapter > +-10.0 LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual > Ultra320 SCSI > +-11.0-[02]--+-00.0 VMware USB1.1 UHCI Controller > | +-01.0 Advanced Micro Devices [AMD] 79c970 > [PCnet32 LANCE] > | +-02.0 Ensoniq ES1371 [AudioPCI-97] > | +-03.0 VMware USB2 EHCI Controller > | +-05.0 VMware Device 07e0 > | \-06.0 Intel Corporation 82545EM Gigabit Ethernet > Controller (Copper) > +-15.0-[03]-- > +-15.1-[04]-- > +-15.2-[05]-- > +-15.3-[06]-- > +-15.4-[07]-- > +-15.5-[08]-- > +-15.6-[09]-- > +-15.7-[0a]-- > +-16.0-[0b]-- > +-16.1-[0c]-- > +-16.2-[0d]-- > +-16.3-[0e]-- > +-16.4-[0f]-- > +-16.5-[10]-- > +-16.6-[11]-- > +-16.7-[12]-- > +-17.0-[13]-- > +-17.1-[14]-- > +-17.2-[15]-- > +-17.3-[16]-- > +-17.4-[17]-- > +-17.5-[18]-- > +-17.6-[19]-- > +-17.7-[1a]-- > +-18.0-[1b]-- > +-18.1-[1c]-- > +-18.2-[1d]-- > +-18.3-[1e]-- > +-18.4-[1f]-- > +-18.5-[20]-- > +-18.6-[21]-- > \-18.7-[22]-- > > > Regards > Jyotiswarup > > > On Tue, Nov 5, 2013 at 9:34 PM, Cyril Cressent <cyril.cressent at intel.com > >wrote: > > > On Tue, Nov 05, 2013 at 08:01:06PM +0530, Jyotiswarup Raiturkar wrote: > > > > > Thanks for the quick reply. I saw some definitions of e1000_phy_82579 > > hence > > > I thought (hoped) the NIC would be supported. I will try to run my dpdk > > app > > > inside a VM with an emulated e1000 NIC (just to test the code ..). > > > > As a general rule, even if you find references to a NIC in the poll mode > > drivers, if it's not listed in > > lib/librte_eal/common/include/rte_pci_dev_ids.h > > then consider the NIC as not supported. > > > > Good luck with the VM, > > > > Cyril > > >
