Hi All, Good morning~
I use WindRiver pktgen v2.1.3 on my servers, two server have same hardware. Each one has two Intel Xeon E5-2648L CPU, 32G DDR3 RAM ,two 10G NIC which is supplied by Intel 82599 chip. And the servers are running CentOS6.1 I run pktgen on both side. one as sender, the other as receiver. If I only start transmit on one port, both Tx and Rx looks good, but if I enable two ports, the receiver will get rx error. Please refer the attachment(pktgen_tx.png and pktgen_rx.png). Did anyone meet this issue before? Thank you! PS: Sorry for my bad English, I?m not native. Best Regards Jia Sui -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://dpdk.org/ml/archives/dev/attachments/20130806/6c8cafcc/attachment.html> -------------- next part -------------- A non-text attachment was scrubbed... Name: pktgen_tx.png Type: image/png Size: 20632 bytes Desc: pktgen_tx.png URL: <http://dpdk.org/ml/archives/dev/attachments/20130806/6c8cafcc/attachment.png> -------------- next part -------------- A non-text attachment was scrubbed... Name: pktgen_rx.png Type: image/png Size: 21190 bytes Desc: pktgen_rx.png URL: <http://dpdk.org/ml/archives/dev/attachments/20130806/6c8cafcc/attachment-0001.png>
