My suggestion was just to prevent the UI thread from locking up so that you
app doesn't appear to be frozen when the plugin is doing its thing.
On Wed, Mar 13, 2013 at 5:03 PM, Aaron Charbonneau <amcha...@gmail.com>wrote:
> Yah that's how I have it working now :) No problem with that approach for
> working with Jasmine.
>
> I made reference to running them asynchronously to respond to Andrew about
> returning immediately after the bits are captured, which in the case of
> using that with Jasmine would only see a benefit IF we could run multiple
> 'it' blocks at the same time.
>
> I think however Andrew was thinking of a different use case where we aren't
> limited by a framework that requires tests to run serially, and results can
> just come back as they are ready, and be evaluated all together at the end,
> or not at all if you just want the captures and no evaluation.
>
> -Aaron
>
>
> On Wed, Mar 13, 2013 at 1:53 PM, Braden Shepherdson <bra...@chromium.org
> >wrote:
>
> > As far as I know, you're correct: there's no way to move on the next it()
> > block before the first one is done.
> >
> > What's the problem with just making the tests wait? Why does the next
> it()
> > block need to start early? You can make your call to Java, use waitFor to
> > wait until the callback with the data is called, run your expectations,
> and
> > then move on to the next it() block. If the next it() block is using the
> > result of this one, then they should be one it() block.
> >
> > Braden
> >
> >
> > On Wed, Mar 13, 2013 at 4:46 PM, Aaron Charbonneau <amcha...@gmail.com
> > >wrote:
> >
> > > Hi Braden,
> > > Sorry maybe I am overlooking something. The way I understand it is
> that
> > a
> > > previous 'it' block needs to complete before the next one can run. So
> I
> > > have various tests setup like this:
> > >
> > > it("renders something", function() {
> > > //draw something
> > > ....
> > > captureAndCompare(); //call the native function
> > > waitsFor(function() {
> > > return captureComplete; //set by the native function callback
> > > }, "capture never completed", 10000);
> > > runs(function() {
> > > expect(captureResult).toBe(0); //expects difference to be 0
> > > });
> > > });
> > > //next 'it' test
> > > ...
> > >
> > > The expect block needs to wait until there is a result returned from
> the
> > > native captureAndCompare call. Therefore we use a waitsFor/runs block
> > > there.
> > >
> > > But say we wanted to allow Javascript to run immediately after calling
> > that
> > > native function. The only thing you need to wait for is that Java
> > grabbed
> > > the bits, and the rest of the processing will be done 'at some point in
> > the
> > > future.' So as Andrew suggested you would return as soon as the bits
> are
> > > captured, and allow JS to run again. The problem is that our expect
> > block
> > > needs the results, so that has to wait, the only other thing to do
> would
> > be
> > > to run the next 'it' block.
> > >
> > > This is the part I didn't think was possible, can the next 'it' block
> be
> > > run while the previous 'it' is still waiting to execute the 'expect'
> > block?
> > > Or is there another approach all together that would allow this?
> > >
> > > Thanks,
> > > Aaron
> > >
> > >
> > > On Wed, Mar 13, 2013 at 1:03 PM, Braden Shepherdson <
> bra...@chromium.org
> > > >wrote:
> > >
> > > > Jasmine does support asynchronous tests, and waiting an arbitrary
> > period
> > > or
> > > > until some condition is true. Why does that not work for these tests?
> > > >
> > > > Braden
> > > >
> > > >
> > > > On Wed, Mar 13, 2013 at 3:42 PM, Aaron Charbonneau <
> amcha...@gmail.com
> > > > >wrote:
> > > >
> > > > > Quick follow up question for the return values stuff:
> > > > > Does it make sense to have my functions called from execute
> > (capture()
> > > > and
> > > > > captureAndCompare()) return an error string if one is encountered
> and
> > > > pass
> > > > > that back in callbackContext.error, then have execute return true?
> > > > >
> > > > > Or is there a preferred way to get errors from sub functions back
> > into
> > > > > Javascript?
> > > > >
> > > > > Thanks!
> > > > >
> > > > >
> > > > > On Wed, Mar 13, 2013 at 12:14 PM, Aaron Charbonneau <
> > > amcha...@gmail.com
> > > > > >wrote:
> > > > >
> > > > > > Thanks Andrew these are great suggestions!
> > > > > >
> > > > > > About not needing the busy-wait in getScreenBits:
> > > > > > I'm not a fan of busy-waiting either.
> > > > > > Perhaps it's a side effect of Jasmine requiring tests to be run
> and
> > > > > > evaluated synchronously that I decided to use a busy-wait in
> > > > > getScreenBits.
> > > > > > If the Runnable calls CallbackContext.success/error once the
> bits
> > > are
> > > > > > captured (but not written to file) on the UIThread, the
> Javascript
> > > side
> > > > > > will proceed to run before it has an image url/compare result,
> most
> > > > > likely
> > > > > > causing that test to fail. As far as I know Jasmine doesn't
> allow
> > > for
> > > > > > kicking off a bunch of tests and then gather all the results at
> the
> > > end
> > > > > and
> > > > > > output pass/fails (each 'expect' function needs to be within an
> > 'it'
> > > > > block,
> > > > > > essentially that means one test must be evaluated before the next
> > can
> > > > > > begin).
> > > > > >
> > > > > > I can see the usefulness of allowing the capture, file io, and
> > > > comparison
> > > > > > to be able to run asynchronously from the Javascript though. In
> the
> > > > case
> > > > > > where you have your own test framework that CAN kick off a bunch
> of
> > > > tests
> > > > > > and just gather the results as they come in and do a batch
> > evaluation
> > > > at
> > > > > > the end, or in the case where you don't want to do any evaluation
> > in
> > > > your
> > > > > > app and just want to get captures as fast as you can,
> asynchronous
> > > > could
> > > > > > increase performance there.
> > > > > >
> > > > > > I could try to implement it this way too, if you think that's a
> > worth
> > > > > > while use case, maybe just provide an 'asynchronous' flag in
> > > > > CaptureOptions?
> > > > > >
> > > > > > For doing the fileIO/compare using cordova.getThreadPool, is
> there
> > a
> > > > > > benefit to doing that if I still plan having the operation block
> > the
> > > > > > Javascript? For asynchronous mode I see why that makes sense.
> > > > > >
> > > > > > For the return values, I'll make those changes right away!
> Thanks
> > > > again
> > > > > > for providing your insight, hopefully I understood it correctly.
> > > > > >
> > > > > > -Aaron
> > > > > >
> > > > > >
> > > > > > On Wed, Mar 13, 2013 at 8:04 AM, Andrew Grieve <
> > agri...@chromium.org
> > > > > >wrote:
> > > > > >
> > > > > >> Had a glance at your code. Things you may want to address:
> > > > > >>
> > > > > >> while(!mUIThreadDone) {}
> > > > > >>
> > > > > >> You shouldn't need to busy-wait. Pass the CallbackContext to the
> > > > > Runnable,
> > > > > >> and call success/error on it whenever you're done. No need to
> have
> > > the
> > > > > web
> > > > > >> thread wait for it. Even better would be to use a second
> Runnable
> > to
> > > > do
> > > > > >> the
> > > > > >> image compare / file IO on a background thread via
> > > > > cordova.getThreadPool()
> > > > > >>
> > > > > >> The return value to execute() should only be false if an invalid
> > > > command
> > > > > >> was passed. It's not meant to indicate the success of the
> > operation.
> > > > You
> > > > > >> should be returning true for it.
> > > > > >>
> > > > > >> Instead of return "success"/"", it might simplify things a bit
> to
> > > > > return a
> > > > > >> boolean of true/false
> > > > > >>
> > > > > >>
> > > > > >> On Tue, Mar 12, 2013 at 4:51 PM, Lorin Beer <
> > > lorin.beer....@gmail.com
> > > > > >> >wrote:
> > > > > >>
> > > > > >> > all the same, very impressive and faster then I expected.
> > > > > >> >
> > > > > >> > - Lorin
> > > > > >> >
> > > > > >> >
> > > > > >> > On Tue, Mar 12, 2013 at 1:46 PM, Aaron Charbonneau <
> > > > > amcha...@gmail.com
> > > > > >> > >wrote:
> > > > > >> >
> > > > > >> > > Thanks Lorin.
> > > > > >> > >
> > > > > >> > > I did a quick test for throughput on an animating canvas. I
> > was
> > > > > able
> > > > > >> to
> > > > > >> > > grab 30 frames within a 5 seconds which equates to around
> > 166ms
> > > > per
> > > > > >> > capture
> > > > > >> > > on a Galaxy Nexus. Unfortunately not fast enough to
> automate
> > > > > >> something
> > > > > >> > > like video. As with any kind of capturing system, often the
> > > > > overhead
> > > > > >> of
> > > > > >> > > copying bits around is enough to slow down the operation of
> > the
> > > > app.
> > > > > >> > >
> > > > > >> > > -Aaron
> > > > > >> > >
> > > > > >> > >
> > > > > >> > > On Tue, Mar 12, 2013 at 11:58 AM, Lorin Beer <
> > > > > >> lorin.beer....@gmail.com
> > > > > >> > > >wrote:
> > > > > >> > >
> > > > > >> > > > Hey Aaron,
> > > > > >> > > >
> > > > > >> > > > very cool stuff, looking forward to checking it out!
> > > > > >> > > >
> > > > > >> > > > Question: any performance hit on the app by using Capture?
> > > > What's
> > > > > >> the
> > > > > >> > > > expected throughput on images taken in this way (given a
> > > > > particular
> > > > > >> > > device,
> > > > > >> > > > say Galaxy Nexus)?
> > > > > >> > > >
> > > > > >> > > > - Lorin
> > > > > >> > > >
> > > > > >> > > >
> > > > > >> > > > On Tue, Mar 12, 2013 at 11:30 AM, Aaron Charbonneau <
> > > > > >> > amcha...@gmail.com
> > > > > >> > > > >wrote:
> > > > > >> > > >
> > > > > >> > > > > Glad you like it :)
> > > > > >> > > > > Yes in fact the actual capture makes use of
> > > > > View.capturePicture()
> > > > > >> > which
> > > > > >> > > > > actually grabs the entire document, then that can be
> > clipped
> > > > > down
> > > > > >> to
> > > > > >> > > the
> > > > > >> > > > > size/location of a specific element.
> > > > > >> > > > >
> > > > > >> > > > > -Aaron
> > > > > >> > > > >
> > > > > >> > > > >
> > > > > >> > > > > On Tue, Mar 12, 2013 at 11:27 AM, Michal Mocny <
> > > > > >> mmo...@chromium.org>
> > > > > >> > > > > wrote:
> > > > > >> > > > >
> > > > > >> > > > > > Aaron,
> > > > > >> > > > > >
> > > > > >> > > > > > I haven't even begun looking at your implementation,
> but
> > > I'm
> > > > > >> just
> > > > > >> > > going
> > > > > >> > > > > to
> > > > > >> > > > > > say it: this is awesome!
> > > > > >> > > > > >
> > > > > >> > > > > > First question: When Capturing a DOM element, can you
> > > > capture
> > > > > >> > 'body'
> > > > > >> > > to
> > > > > >> > > > > > grab it&children for a "full content screenshot", or
> > does
> > > it
> > > > > >> have
> > > > > >> > to
> > > > > >> > > > be a
> > > > > >> > > > > > specific single element?
> > > > > >> > > > > >
> > > > > >> > > > > > -Michal
> > > > > >> > > > > >
> > > > > >> > > > > >
> > > > > >> > > > > > On Tue, Mar 12, 2013 at 1:58 PM, Aaron Charbonneau <
> > > > > >> > > amcha...@gmail.com
> > > > > >> > > > > > >wrote:
> > > > > >> > > > > >
> > > > > >> > > > > > > Greetings! My name is Aaron Charbonneau, happy to
> be
> > a
> > > > new
> > > > > >> > member
> > > > > >> > > of
> > > > > >> > > > > the
> > > > > >> > > > > > > mailing list!
> > > > > >> > > > > > >
> > > > > >> > > > > > > I have been developing a sceenshot plugin for
> Cordova
> > to
> > > > > help
> > > > > >> > > > > facilitate
> > > > > >> > > > > > > automation testing and debugging of Cordova apps,
> and
> > I
> > > > > would
> > > > > >> > love
> > > > > >> > > > some
> > > > > >> > > > > > > feedback on it. Currently Cordova provides a bunch
> of
> > > > > native
> > > > > >> > > > functions
> > > > > >> > > > > > > that allow you to do some cool stuff, but not much
> > > > > >> functionality
> > > > > >> > to
> > > > > >> > > > > test
> > > > > >> > > > > > > the apps that make use of them. Being able to take
> a
> > > > > capture
> > > > > >> of
> > > > > >> > > the
> > > > > >> > > > > > screen
> > > > > >> > > > > > > from within you app is a great way to automate
> testing
> > > or
> > > > > get
> > > > > >> > > > > additional
> > > > > >> > > > > > > information for debugging an issue. Since there is
> no
> > > > > >> > > > > > > Javascript mechanism for taking screen captures the
> > > > solution
> > > > > >> > would
> > > > > >> > > > have
> > > > > >> > > > > > to
> > > > > >> > > > > > > be native, which fits nicely into the "gap" that
> > > > > >> Cordova/Phonegap
> > > > > >> > > > > > bridges.
> > > > > >> > > > > > > Any medium to large scale app can benefit greatly
> > from
> > > > > >> > automation
> > > > > >> > > > > > testing
> > > > > >> > > > > > > and any app can benefit from an extra debugging
> tool,
> > > and
> > > > > >> that is
> > > > > >> > > > what
> > > > > >> > > > > I
> > > > > >> > > > > > > hope this screenshot plugin can help achieve.
> > > > > >> > > > > > >
> > > > > >> > > > > > > Currently the plugin offers 2 functions:
> > > > > >> > > > > > >
> > > > > >> > > > > > > Capture():
> > > > > >> > > > > > > * Take a capture of the current view, write that
> > capture
> > > > to
> > > > > a
> > > > > >> > .png
> > > > > >> > > > file
> > > > > >> > > > > > > with the specified file name and sub directory of
> the
> > > > sdcard
> > > > > >> > > > (fallback
> > > > > >> > > > > to
> > > > > >> > > > > > > emulated sdcard in the case there isn't an sdcard
> > > mounted)
> > > > > >> > > > > > > * Able to create a sub-screenshot with a specified
> > > > rectangle
> > > > > >> in
> > > > > >> > > order
> > > > > >> > > > > to
> > > > > >> > > > > > > block out ui elements that may be variable, and also
> > > save
> > > > > >> space.
> > > > > >> > > > > > > * Can take captures of images/dom elements
> (including
> > > > > canvas)
> > > > > >> > that
> > > > > >> > > > are
> > > > > >> > > > > > > lager than the actual screen size
> > > > > >> > > > > > >
> > > > > >> > > > > > > CaptureAndCompare():
> > > > > >> > > > > > > * All the functionality of Capture()
> > > > > >> > > > > > > * Perform a comparison between the captured image
> and
> > a
> > > > > >> baseline
> > > > > >> > > > image
> > > > > >> > > > > > > located at the specified location in either the
> assets
> > > > > folder
> > > > > >> or
> > > > > >> > > the
> > > > > >> > > > > > > sdcard.
> > > > > >> > > > > > > * User can specify per color channel tolerances as
> > well
> > > as
> > > > > >> total
> > > > > >> > > > pixel
> > > > > >> > > > > > > tolerances to avoid false positives for the
> inevitable
> > > > > >> rendering
> > > > > >> > > > > > > differences across devices.
> > > > > >> > > > > > > * Optionally output a png file that contains the
> > > > differences
> > > > > >> > > between
> > > > > >> > > > > the
> > > > > >> > > > > > > actual and the baseline for debugging/triage
> purposes,
> > > two
> > > > > >> modes:
> > > > > >> > > > > binary
> > > > > >> > > > > > > diff (all failing pixels appear as solid white) or
> the
> > > > true
> > > > > >> > > > differences
> > > > > >> > > > > > > between pixels.
> > > > > >> > > > > > >
> > > > > >> > > > > > > If you can spare some time, I would love it if you
> > could
> > > > > take
> > > > > >> a
> > > > > >> > > look
> > > > > >> > > > at
> > > > > >> > > > > > the
> > > > > >> > > > > > > api and parameters I have defined to make sure they
> > > adhere
> > > > > to
> > > > > >> > > Cordova
> > > > > >> > > > > > > plugin best practices. The most crucial part would
> be
> > > in
> > > > > the
> > > > > >> > > plugin
> > > > > >> > > > > > itself
> > > > > >> > > > > > > at ScreenCapture.java:
> > > > > >> > > > > > >
> > > > > >> > > > > > >
> > > > > >> > > > > >
> > > > > >> > > > >
> > > > > >> > > >
> > > > > >> > >
> > > > > >> >
> > > > > >>
> > > > >
> > > >
> > >
> >
> https://github.com/Charbs09/Cordova-Mobile-Spec-ScreenCapture/blob/master/src/org/apache/cordova/plugin/ScreenCapture.java(capture()
> > > > > >> > > > > > > and captureAndCompare() are the two exposed
> functions)
> > > > > >> > > > > > >
> > > > > >> > > > > > > I'm also interested to know you thoughts on it's
> > usage.
> > > I
> > > > > >> > started
> > > > > >> > > > with
> > > > > >> > > > > > the
> > > > > >> > > > > > > mobile-spec testing framework and put some quick
> > > rendering
> > > > > >> tests
> > > > > >> > > into
> > > > > >> > > > > the
> > > > > >> > > > > > > Autotest section as a viable use case. In order to
> > get
> > > > the
> > > > > >> > WebView
> > > > > >> > > > > into
> > > > > >> > > > > > > the state I wanted to capture, I had to implement a
> > wait
> > > > > >> timer to
> > > > > >> > > > allow
> > > > > >> > > > > > the
> > > > > >> > > > > > > view to update before taking the capture. Once the
> > wait
> > > > > >> function
> > > > > >> > > > > > > completes, the capture can be taken and everything
> > from
> > > > > there
> > > > > >> is
> > > > > >> > > > > callback
> > > > > >> > > > > > > based. I use the Jasmine waitsFor()/runs() blocks
> to
> > > make
> > > > > the
> > > > > >> > > tests
> > > > > >> > > > > run
> > > > > >> > > > > > > synchronously. For some validation testing I made a
> > > > compare
> > > > > >> > > function
> > > > > >> > > > > in
> > > > > >> > > > > > > Javascript to run against the native compare. Turns
> > out
> > > > > Java
> > > > > >> > runs
> > > > > >> > > > alot
> > > > > >> > > > > > > faster than Javascript (surprise!) thus the native
> > > compare
> > > > > is
> > > > > >> > about
> > > > > >> > > > > 2-5x
> > > > > >> > > > > > > faster. All in all the process is fairly quick, the
> > > full
> > > > > >> > > > > > captureAndCompare
> > > > > >> > > > > > > with 3 file io's takes about 233ms on a Nexus One,
> and
> > > > > ~100ms
> > > > > >> on
> > > > > >> > a
> > > > > >> > > > > Nexus
> > > > > >> > > > > > 10
> > > > > >> > > > > > > (256x256 image size).
> > > > > >> > > > > > >
> > > > > >> > > > > > > Anyways here is the usage:
> > > > > >> > > > > > >
> > > > > >> > > > > > >
> > > > > >> > > > > >
> > > > > >> > > > >
> > > > > >> > > >
> > > > > >> > >
> > > > > >> >
> > > > > >>
> > > > >
> > > >
> > >
> >
> https://github.com/Charbs09/Cordova-Mobile-Spec-ScreenCapture/blob/master/assets/www/autotest/tests/rendering.tests.js
> > > > > >> > > > > > >
> > > > > >> > > > > > > And here's the JS wrapper for the plugin calls:
> > > > > >> > > > > > >
> > > > > >> > > > > > >
> > > > > >> > > > > >
> > > > > >> > > > >
> > > > > >> > > >
> > > > > >> > >
> > > > > >> >
> > > > > >>
> > > > >
> > > >
> > >
> >
> https://github.com/Charbs09/Cordova-Mobile-Spec-ScreenCapture/blob/master/assets/www/screencapture.js
> > > > > >> > > > > > >
> > > > > >> > > > > > > Thanks for your time, and I look forward to ANY
> > feedback
> > > > > >> positive
> > > > > >> > > or
> > > > > >> > > > > > > negative.
> > > > > >> > > > > > >
> > > > > >> > > > > > > Thanks,
> > > > > >> > > > > > > Aaron
> > > > > >> > > > > > >
> > > > > >> > > > > >
> > > > > >> > > > >
> > > > > >> > > >
> > > > > >> > >
> > > > > >> >
> > > > > >>
> > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
>
