Hey Nux, I've being testing out the host-ha feature against a couple of physical hosts. I've found that if the compute offering isn't ha enabled, then the vm isn't restarted on the original host when it is rebooted, or any other host. If the vm is ha-enabled, then the vm was restarted on the original host when host ha restarted the host.
Can you double check that the instance was an ha-enabled one? OR maybe the timeouts for the host-ha are too long and the vm-ha timed-out before hand ...? Kind regards, Paul Angus paul.an...@shapeblue.com www.shapeblue.com 53 Chandos Place, Covent Garden, London WC2N 4HSUK @shapeblue -----Original Message----- From: Nux! [mailto:n...@li.nux.ro] Sent: 17 January 2018 09:12 To: dev <dev@cloudstack.apache.org> Subject: Re: HA issues Right, sorry for using the terms interchangeably, I see what you mean. I'll do further testing then as VM HA was also not working in my setup. I'll be back. -- Sent from the Delta quadrant using Borg technology! Nux! www.nux.ro ----- Original Message ----- > From: "Rohit Yadav" <rohit.ya...@shapeblue.com> > To: "dev" <dev@cloudstack.apache.org> > Sent: Wednesday, 17 January, 2018 09:09:19 > Subject: Re: HA issues > Hi Lucian, > > > The "Host HA" feature is entirely different from VM HA, however, they > may work in tandem, so please stop using the terms interchangeably as > it may cause the community to believe a regression has been caused. > > > The "Host HA" feature currently ships with only "Host HA" provider for > KVM that is strictly tied to out-of-band management (IPMI for fencing, > i.e power off and recovery, i.e. reboot) and NFS (as primary storage). > (We also have a provider for simulator, but that's for coverage/testing > purposes). > > > Therefore, "Host HA" for KVM (+nfs) currently works only when OOBM is enabled. > The frameowkr allows interested parties may write their own HA > providers for a hypervisor that can use a different strategy/mechanism > for fencing/recovery of hosts (including write a non-IPMI based OOBM > plugin) and host/disk activity checker that is non-NFS based. > > > The "Host HA" feature ships disabled by default and does not cause any > interference with VM HA. However, when enabled and configured > correctly, it is a known limitation that when it is unable to > successfully perform recovery or fencing tasks it may not trigger VM > HA. We can discuss how to handle such cases (thoughts?). "Host HA" > would try couple of times to recover and failing to do so, it would > eventually trigger a host fencing task. If it's unable to fence a > host, it will indefinitely attempt to fence the host (the host state > will be stuck at fencing state in cloud.ha_config table for example) > and alerts will be sent to admin who can do some manual intervention to > handle such situations (if you've email/smtp enabled, you should see alert > emails). > > > We can discuss how to improve and have a workaround for the case > you've hit, thanks for sharing. > > > - Rohit > > ________________________________ > From: Nux! <n...@li.nux.ro> > Sent: Tuesday, January 16, 2018 10:42:35 PM > To: dev > Subject: Re: HA issues > > Ok, reinstalled and re-tested. > > What I've learned: > > - HA only works now if OOB is configured, the old way HA no longer > applies - this can be good and bad, not everyone has IPMIs > > - HA only works if IPMI is reachable. I've pulled the cord on a HV and > HA failed to do its thing, leaving me with a HV down along with all > the VMs running there. That's bad. > I've opened this ticket for it: > https://issues.apache.org/jira/browse/CLOUDSTACK-10234 > > Let me know if you need any extra info or stuff to test. > > Regards, > Lucian > > -- > Sent from the Delta quadrant using Borg technology! > > Nux! > www.nux.ro > > > rohit.ya...@shapeblue.com > www.shapeblue.com > 53 Chandos Place, Covent Garden, London WC2N 4HSUK @shapeblue > > > > ----- Original Message ----- >> From: "Nux!" <n...@li.nux.ro> >> To: "dev" <dev@cloudstack.apache.org> >> Sent: Tuesday, 16 January, 2018 11:35:58 >> Subject: Re: HA issues > >> I'll reinstall my setup and try again, just to be sure I'm working on >> a clean slate. >> >> -- >> Sent from the Delta quadrant using Borg technology! >> >> Nux! >> www.nux.ro >> >> ----- Original Message ----- >>> From: "Rohit Yadav" <rohit.ya...@shapeblue.com> >>> To: "dev" <dev@cloudstack.apache.org> >>> Sent: Tuesday, 16 January, 2018 11:29:51 >>> Subject: Re: HA issues >> >>> Hi Lucian, >>> >>> >>> If you're talking about the new HostHA feature (with KVM+nfs+ipmi), >>> please refer to following docs: >>> >>> http://docs.cloudstack.apache.org/projects/cloudstack-administration >>> /en/latest/hosts.html#out-of-band-management >>> >>> https://cwiki.apache.org/confluence/display/CLOUDSTACK/Host+HA >>> >>> >>> We'll need to you look at logs perhaps create a JIRA ticket with the >>> logs and details? If you saw ipmi based reboot, then host-ha indeed >>> tried to recover i.e. reboot the host, once hostha has done its work >>> it would schedule HA for VM as soon as the recovery operation >>> succeeds (we've simulator and kvm based marvin tests for such scenarios). >>> >>> >>> Can you see it making attempt to schedule VM ha in logs, or any failure? >>> >>> >>> - Rohit >>> >>> <https://cloudstack.apache.org> >>> >>> >>> >>> ________________________________ >>> From: Nux! <n...@li.nux.ro> >>> Sent: Tuesday, January 16, 2018 12:47:56 AM >>> To: dev >>> Subject: [4.11] HA issues >>> >>> Hi, >>> >>> I see there's a new HA engine for KVM and IPMI support which is >>> really nice, however it seems hit and miss. >>> I have created an instance with HA offering, kernel panicked one of >>> the hypervisors - after a while the server was rebooted via IPMI >>> probably, but the instance never moved to a running hypervisor and >>> even after the original hypervisor came back it was still left in Stopped >>> state. >>> Is there any extra things I need to set up to have proper HA? >>> >>> Regards, >>> Lucian >>> >>> -- >>> Sent from the Delta quadrant using Borg technology! >>> >>> Nux! >>> www.nux.ro >>> >>> rohit.ya...@shapeblue.com >>> www.shapeblue.com<http://www.shapeblue.com> >>> 53 Chandos Place, Covent Garden, London WC2N 4HSUK > > > @shapeblue
