Oh sorry, my computer switched to a different network. Thanks Wei. Here is the new agent logs:
http://pastebin.com/SzD2VfLJ The System VMs are still stuck in starting mode. Any clues? On Wed, Sep 14, 2016 at 7:15 PM, Wei ZHOU <ustcweiz...@gmail.com> wrote: > it looks the cloudstack agent cannot communicate with cloudstack management > server. > > is your management server up ? > is 192.168.1.3 the right IP ? > > -Wei > > 2016-09-14 19:44 GMT+02:00 ned dogg <neddog...@gmail.com>: > > > Here they are: > > http://pastebin.com/rUP0mJ1P > > > > On Wed, Sep 14, 2016 at 6:26 PM, Simon Weller <swel...@ena.com> wrote: > > > > > Can you post the agent log output (in debug) after this change? > > > > > > > > > ________________________________ > > > From: ned dogg <neddog...@gmail.com> > > > Sent: Wednesday, September 14, 2016 11:43 AM > > > To: dev@cloudstack.apache.org > > > Subject: Re: System VM's are getting stuck in starting mode > > > > > > Thanks for explanation Simon. I plugged an interface eth0 into your > > > cloudbr0 but > > > no luck. > > > brctl show > > > bridge name bridge id STP enabled interfaces > > > cloud0 8000.000000000000 no > > > cloudbr0 8000.40a8f06672e2 no eth0 > > > cloudbr1 8000.000000000000 no > > > lxcbr0 8000.000000000000 no > > > virbr0 8000.000000000000 yes Any clue? > > > > > > On Wed, Sep 14, 2016 at 4:12 PM, Simon Weller <swel...@ena.com> wrote: > > > > > > > The CloudStack agent walks all the bridges and then tries to find the > > > > underlying interface being used. If it can't identify the interface, > > then > > > > it fails to start. > > > > > > > > The issue you seem to have is that you have bridges setup without any > > > > actual physical interfaces attached to them. So your bridges have no > > > > network connectivity. > > > > > > > > > > > > When you add a host from the CloudStack Management GUI, it will try > and > > > do > > > > this work for you. Since you already have some bridges setup and you > > > don't > > > > have the ip on eth0, the setup script probably didn't touch any of > your > > > > config. > > > > > > > > > > > > Take a look at the agent setup instructions here for how to do this > > > > manually: > > > > > > > > > > > > http://docs.cloudstack.apache.org/projects/cloudstack- > > > installation/en/4.6/ > > > > hypervisor/kvm.html > > > > > > > > > > > > Search for "Configure in Ubuntu". > > > > > > > > > > > > In this example, they are using vlan sub-interfaces to provide > > > > connectivity to two difference bridges, from a single physical > > interface. > > > > You could just use regular interfaces if you have them available > (e.g. > > > eth0 > > > > and eth1). You could also just use a single bridge (cloudbr0) and > then > > > plug > > > > both the guest and public networks into that. That would require > vlans > > > > though, on at least one of the networks (you could use native for > > > > management). > > > > > > > > > > > > You could also wipe the host and install Ubuntu (or Centos) so you > > have a > > > > vanilla OS and try the setup again. I'm not very experienced with > > Ubuntu, > > > > as we use Centos, so there may be some nuance you have to take into > > > > consideration. I'll let others chime in on that. > > > > > > > > > > > > Does that make sense? > > > > > > > > > > > > - Si > > > > > > > > > > > > ________________________________ > > > > From: ned dogg <neddog...@gmail.com> > > > > Sent: Wednesday, September 14, 2016 9:54 AM > > > > To: dev@cloudstack.apache.org > > > > Subject: Re: System VM's are getting stuck in starting mode > > > > > > > > Sorry, Simon I don't understand. Please can you be more explicite. > > > > > > > > On Wed, Sep 14, 2016 at 3:46 PM, Simon Weller <swel...@ena.com> > wrote: > > > > > > > > > So it doesn't appear you have any interfaces plugged into your > > cloudbr0 > > > > or > > > > > cloudbr1 bridges. Please note that the agent expects to find > > particular > > > > > interface name formats: eth*, bond*, team*, vlan*, em*, p*p*, ens*, > > > eno*, > > > > > enp*, or enx*. Try adding your actual interface to the bridge. > > > > > > > > > > > > > > > ________________________________ > > > > > From: ned dogg <neddog...@gmail.com> > > > > > Sent: Wednesday, September 14, 2016 9:38 AM > > > > > To: dev@cloudstack.apache.org > > > > > Subject: Re: System VM's are getting stuck in starting mode > > > > > > > > > > *brctl* *show* > > > > > bridge name bridge id STP enabled interfaces > > > > > cloud0 8000.000000000000 no > > > > > cloudbr0 8000.000000000000 no > > > > > cloudbr1 8000.000000000000 no > > > > > lxcbr0 8000.000000000000 no > > > > > virbr0 8000.000000000000 yes > > > > > > > > > > *ifconfig* > > > > > cloud0 Link encap:Ethernet HWaddr 1e:ad:ae:e9:ac:36 > > > > > inet addr:169.254.0.1 Bcast:0.0.0.0 Mask:255.255.0.0 > > > > > inet6 addr: fe80::1cad:aeff:fee9:ac36/64 Scope:Link > > > > > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > > > > > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > > > > > TX packets:153 errors:0 dropped:0 overruns:0 carrier:0 > > > > > collisions:0 txqueuelen:0 > > > > > RX bytes:0 (0.0 B) TX bytes:24346 (24.3 KB) > > > > > > > > > > cloudbr0 Link encap:Ethernet HWaddr 4a:ee:2d:0e:74:a4 > > > > > inet6 addr: fe80::48ee:2dff:fe0e:74a4/64 Scope:Link > > > > > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > > > > > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > > > > > TX packets:35 errors:0 dropped:0 overruns:0 carrier:0 > > > > > collisions:0 txqueuelen:0 > > > > > RX bytes:0 (0.0 B) TX bytes:5708 (5.7 KB) > > > > > > > > > > cloudbr1 Link encap:Ethernet HWaddr 2e:dd:5d:be:b7:d8 > > > > > inet6 addr: fe80::2cdd:5dff:febe:b7d8/64 Scope:Link > > > > > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > > > > > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > > > > > TX packets:34 errors:0 dropped:0 overruns:0 carrier:0 > > > > > collisions:0 txqueuelen:0 > > > > > RX bytes:0 (0.0 B) TX bytes:5480 (5.4 KB) > > > > > > > > > > eth0 Link encap:Ethernet HWaddr 40:a8:f0:66:72:e2 > > > > > UP BROADCAST MULTICAST MTU:1500 Metric:1 > > > > > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > > > > > TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 > > > > > collisions:0 txqueuelen:1000 > > > > > RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) > > > > > Interrupt:20 Memory:f7d00000-f7d20000 > > > > > > > > > > eth0:avahi Link encap:Ethernet HWaddr 40:a8:f0:66:72:e2 > > > > > inet addr:169.254.10.237 Bcast:169.254.255.255 > > > > Mask:255.255.0.0 > > > > > UP BROADCAST MULTICAST MTU:1500 Metric:1 > > > > > Interrupt:20 Memory:f7d00000-f7d20000 > > > > > > > > > > lo Link encap:Local Loopback > > > > > inet addr:127.0.0.1 Mask:255.0.0.0 > > > > > inet6 addr: ::1/128 Scope:Host > > > > > UP LOOPBACK RUNNING MTU:65536 Metric:1 > > > > > RX packets:14165 errors:0 dropped:0 overruns:0 frame:0 > > > > > TX packets:14165 errors:0 dropped:0 overruns:0 carrier:0 > > > > > collisions:0 txqueuelen:0 > > > > > RX bytes:8078857 (8.0 MB) TX bytes:8078857 (8.0 MB) > > > > > > > > > > lxcbr0 Link encap:Ethernet HWaddr 72:8b:a5:4b:66:28 > > > > > inet addr:10.0.3.1 Bcast:10.0.3.255 Mask:255.255.255.0 > > > > > inet6 addr: fe80::708b:a5ff:fe4b:6628/64 Scope:Link > > > > > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > > > > > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > > > > > TX packets:112 errors:0 dropped:0 overruns:0 carrier:0 > > > > > collisions:0 txqueuelen:0 > > > > > RX bytes:0 (0.0 B) TX bytes:18691 (18.6 KB) > > > > > > > > > > virbr0 Link encap:Ethernet HWaddr ea:d0:ee:b5:ff:05 > > > > > inet addr:192.168.122.1 Bcast:192.168.122.255 > > > > > Mask:255.255.255.0 > > > > > UP BROADCAST MULTICAST MTU:1500 Metric:1 > > > > > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > > > > > TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 > > > > > collisions:0 txqueuelen:0 > > > > > RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) > > > > > > > > > > wlan0 Link encap:Ethernet HWaddr d8:eb:97:e9:af:2f > > > > > inet addr:192.168.100.12 Bcast:192.168.100.255 > > > > > Mask:255.255.255.0 > > > > > inet6 addr: fe80::daeb:97ff:fee9:af2f/64 Scope:Link > > > > > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > > > > > RX packets:14277 errors:0 dropped:0 overruns:0 frame:0 > > > > > TX packets:15749 errors:0 dropped:0 overruns:0 carrier:0 > > > > > collisions:0 txqueuelen:1000 > > > > > RX bytes:6382785 (6.3 MB) TX bytes:8834906 (8.8 MB) > > > > > > > > > > > > > > > > > > > > On Wed, Sep 14, 2016 at 3:27 PM, Simon Weller <swel...@ena.com> > > wrote: > > > > > > > > > > > Can you post ifconfig and brctl show? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ________________________________ > > > > > > From: ned dogg <neddog...@gmail.com> > > > > > > Sent: Wednesday, September 14, 2016 4:54 AM > > > > > > To: dev@cloudstack.apache.org > > > > > > Subject: Re: System VM's are getting stuck in starting mode > > > > > > > > > > > > Thanks for the reply Simon. > > > > > > > > > > > > > > > > > > *vi /etc/network/interfaces* > > > > > > # This file describes the network interfaces available on your > > system > > > > > > # and how to activate them. For more information, see > > interfaces(5). > > > > > > > > > > > > # The loopback network interface > > > > > > auto lo > > > > > > iface lo inet loopback > > > > > > > > > > > > # Public network > > > > > > auto cloudbr0 > > > > > > iface cloudbr0 inet manual > > > > > > bridge_ports none > > > > > > bridge_fd 5 > > > > > > bridge_stp off > > > > > > bridge_maxwait 1 > > > > > > > > > > > > # Private network > > > > > > auto cloudbr1 > > > > > > iface cloudbr1 inet manual > > > > > > bridge_ports none > > > > > > bridge_fd 5 > > > > > > bridge_stp off > > > > > > bridge_maxwait 1 > > > > > > > > > > > > # Source interfaces > > > > > > # Please check /etc/network/interfaces.d before changing this > file > > > > > > # as interfaces may have been defined in > /etc/network/interfaces.d > > > > > > # NOTE: the primary ethernet device is defined in > > > > > > # /etc/network/interfaces.d/eth0 > > > > > > # See LP: #1262951 > > > > > > source /etc/network/interfaces.d/*.cfg > > > > > > > > > > > > *vi /etc/network/interfaces.d/eth0.cfg* > > > > > > # The primary network interface > > > > > > auto eth0 > > > > > > iface eth0 inet dhcp > > > > > > > > > > > > On Tue, Sep 13, 2016 at 8:08 PM, Simon Weller <swel...@ena.com> > > > wrote: > > > > > > > > > > > > > This looks interesting to me: > > > > > > > > > > > > > > 1. > > > > > > > looking for pif for bridge virbr0 > > > > > > > 2. > > > > > > > 2016-09-13 19:22:09,833 DEBUG [kvm.resource. > > > > LibvirtComputingResource] > > > > > > > (main:null) failing to get physical interface from bridge > virbr0, > > > did > > > > > not > > > > > > > find an eth*, bond*, team*, vlan*, em*, p*p*, ens*, eno*, enp*, > > or > > > > enx* > > > > > > in > > > > > > > /sys/devices/virtual/net/virbr0/brif > > > > > > > 3. > > > > > > > 2016-09-13 19:22:09,833 DEBUG [kvm.resource. > > > > LibvirtComputingResource] > > > > > > > (main:null) looking for pif for bridge lxcbr0 > > > > > > > 4. > > > > > > > 2016-09-13 19:22:09,833 DEBUG [kvm.resource. > > > > LibvirtComputingResource] > > > > > > > (main:null) failing to get physical interface from bridge > > > > > > > > > > > > > > > > > > > > > Can you post your interfaces and bridges please? > > > > > > > > > > > > > > > > > > > > > - Si > > > > > > > > > > > > > > > > > > > > > ________________________________ > > > > > > > From: ned dogg <neddog...@gmail.com> > > > > > > > Sent: Tuesday, September 13, 2016 1:27 PM > > > > > > > To: dev@cloudstack.apache.org > > > > > > > Subject: Re: System VM's are getting stuck in starting mode > > > > > > > > > > > > > > Hi Simon, > > > > > > > > > > > > > > Thanks for the reply. I changed the logging level to dedug as > per > > > > your > > > > > > > recommendation. Please find enclosed the link of my > > > > > cloudstack-management > > > > > > > and cloudstack-agent respectively: > > > > > > > http://pastebin.com/gG1LRm0X > > > > > [http://pastebin.com/i/facebook.png]<http://pastebin.com/gG1LRm0X> > > > > > > > > > > cloudstack-management logs - Pastebin.com<http://pastebin. > > com/gG1LRm0X > > > > > > > > > pastebin.com > > > > > > > > > > > > > > > > > > > > > > http://pastebin.com/zJ7CHhLD > > > > > > > > > > > > > > On Mon, Sep 12, 2016 at 2:22 PM, Tutkowski, Mike < > > > > > > > mike.tutkow...@netapp.com> > > > > > > > wrote: > > > > > > > > > > > > > > > Thanks > > > > > > > > > > > > > > > > Yeah, I wasn't sure if you just experienced it on reboot or > if > > > > > > sometimes > > > > > > > > when setting up your cloud you encountered this issue, as > well > > > > (like > > > > > > > 9144). > > > > > > > > ________________________________________ > > > > > > > > From: ned dogg <neddog...@gmail.com> > > > > > > > > Sent: Monday, September 12, 2016 6:08 AM > > > > > > > > To: dev@cloudstack.apache.org > > > > > > > > Subject: Re: System VM's are getting stuck in starting mode > > > > > > > > > > > > > > > > Hi Mike and thank you for the reply. Sorry but this issue is > > not > > > > > > similar > > > > > > > > to mine, I already gave you the one which looks similar : > > > > > > > > https://issues.apache.org/jira/browse/CLOUDSTACK-7936 > > > > > > > > > > > > > > > > On Sun, Sep 11, 2016 at 5:28 AM, Tutkowski, Mike < > > > > > > > > mike.tutkow...@netapp.com> > > > > > > > > wrote: > > > > > > > > > > > > > > > > > Is your issue similar to this one? > > > > > > > > > > > > > > > > > > https://issues.apache.org/jira/browse/CLOUDSTACK-9144 > > > > > > > > > ________________________________________ > > > > > > > > > From: ned dogg <neddog...@gmail.com> > > > > > > > > > Sent: Saturday, September 10, 2016 1:24 PM > > > > > > > > > To: dev@cloudstack.apache.org > > > > > > > > > Subject: System VM's are getting stuck in starting mode > > > > > > > > > > > > > > > > > > Hi Everybody, > > > > > > > > > > > > > > > > > > I'm a newbie on cloudstack. I started playing with this > > > > technology. > > > > > > For > > > > > > > > > that I install both the management -server and the agent. I > > was > > > > > able > > > > > > to > > > > > > > > > install and start them properly but I unable to create any > > > > > instance. > > > > > > > > When I > > > > > > > > > click on instance the menu then I click on add instance > and > > > > next, > > > > > I > > > > > > > have > > > > > > > > > no templates that is presented to me. Thus I stuck at this > > > > level. I > > > > > > > don't > > > > > > > > > know what to do. > > > > > > > > > > > > > > > > > > I think that this issue is because my System VM get stuck > an > > > the > > > > > > > starting > > > > > > > > > mode. After some googling, I discovered that this is a know > > > issue > > > > > > > > > https://issues.apache.org/jira/browse/CLOUDSTACK-7936. But > > > this > > > > > > issue > > > > > > > is > > > > > > > > > for cloudstack 4.4.1 but I'm using cloudstack 4.6. I was > > asking > > > > > > myself > > > > > > > if > > > > > > > > > this issue is also common on cloudstack 4.6? > > > > > > > > > > > > > > > > > > Please any help will be welcoming. > > > > > > > > > Thanks. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
