Github user wilderrodrigues commented on the pull request:
https://github.com/apache/cloudstack/pull/940#issuecomment-148926525
Hi @remibergsma @karuturi @miguelaferreira @wido @borisroman @bhaisaab
@bvbharat
Please have a look at this PR.
== Hardware required tests ==
* Management Server + MySQL running on CentOS 7.1
* One KVM host running on CentOS 7.1
* ACS Agent and Common RPMs built from source
```
Create a redundant VPC with two networks with two VMs in each network ...
=== TestName: test_01_create_redundant_VPC_2tiers_4VMs_4IPs_4PF_ACL | Status :
SUCCESS ===
ok
Create a redundant VPC with two networks with two VMs in each network and
check default routes ... === TestName: test_02_redundant_VPC_default_routes |
Status : SUCCESS ===
ok
Test iptables default INPUT/FORWARD policy on RouterVM ... === TestName:
test_02_routervm_iptables_policies | Status : SUCCESS ===
ok
Test iptables default INPUT/FORWARD policies on VPC router ... ===
TestName: test_01_single_VPC_iptables_policies | Status : SUCCESS ===
ok
Create a VPC with two networks with one VM in each network and test nics
after destroy ... === TestName: test_01_VPC_nics_after_destroy | Status :
SUCCESS ===
ok
Create a VPC with two networks with one VM in each network and test default
routes ... === TestName: test_02_VPC_default_routes | Status : SUCCESS ===
ok
Test to create Load balancing rule with source NAT ... === TestName:
test_01_create_lb_rule_src_nat | Status : SUCCESS ===
ok
Test to create Load balancing rule with non source NAT ... === TestName:
test_02_create_lb_rule_non_nat | Status : SUCCESS ===
ok
Test for assign & removing load balancing rule ... === TestName:
test_assign_and_removal_lb | Status : SUCCESS ===
ok
Stop existing router, add a PF rule and check we can access the VM ... ===
TestName: test_isolate_network_FW_PF_default_routes | Status : SUCCESS ===
ok
Test redundant router internals ... === TestName:
test_RVR_Network_FW_PF_SSH_default_routes | Status : SUCCESS ===
ok
----------------------------------------------------------------------
Ran 11 tests in 8295.897s
OK
```
== No Hardware required tests ==
* Management Server + MySQL running on CentOS 7.1
* Two KVM hosts running on CentOS 7.1
* ACS Agent and Common RPMs built from source
```
Test router internal advanced zone ... === TestName:
test_02_router_internal_adv | Status : SUCCESS ===
ok
Test restart network ... === TestName: test_03_restart_network_cleanup |
Status : SUCCESS ===
ok
Test router basic setup ... === TestName: test_05_router_basic | Status :
SUCCESS ===
ok
Test router advanced setup ... === TestName: test_06_router_advanced |
Status : SUCCESS ===
ok
Test stop router ... === TestName: test_07_stop_router | Status : SUCCESS
===
ok
Test start router ... === TestName: test_08_start_router | Status : SUCCESS
===
ok
Test reboot router ... === TestName: test_09_reboot_router | Status :
SUCCESS ===
ok
test_privategw_acl (integration.smoke.test_privategw_acl.TestPrivateGwACL)
... === TestName: test_privategw_acl | Status : SUCCESS ===
ok
Test VPN in VPC ... === TestName: test_vpc_remote_access_vpn | Status :
SUCCESS ===
ok
Test VPN in VPC ... === TestName: test_vpc_site2site_vpn | Status : SUCCESS
===
ok
Test to create service offering ... === TestName:
test_01_create_service_offering | Status : SUCCESS ===
ok
Test to update existing service offering ... === TestName:
test_02_edit_service_offering | Status : SUCCESS ===
ok
Test to delete service offering ... === TestName:
test_03_delete_service_offering | Status : SUCCESS ===
ok
Test create VPC offering ... === TestName: test_01_create_vpc_offering |
Status : SUCCESS ===
ok
Test VPC offering without load balancing service ... === TestName:
test_03_vpc_off_without_lb | Status : EXCEPTION ===
ERROR
Test VPC offering without static NAT service ... === TestName:
test_04_vpc_off_without_static_nat | Status : EXCEPTION ===
ERROR
Test VPC offering without port forwarding service ... === TestName:
test_05_vpc_off_without_pf | Status : EXCEPTION ===
ERROR
KNOWN ISSUE => https://issues.apache.org/jira/browse/CLOUDSTACK-8935
Test VPC offering with invalid services ... === TestName:
test_06_vpc_off_invalid_services | Status : SUCCESS ===
ok
Test update VPC offering ... === TestName: test_07_update_vpc_off | Status
: SUCCESS ===
ok
Test list VPC offering ... === TestName: test_08_list_vpc_off | Status :
SUCCESS ===
ok
test_09_create_redundant_vpc_offering
(integration.component.test_vpc_offerings.TestVPCOffering) ... === TestName:
test_09_create_redundant_vpc_offering | Status : SUCCESS ===
ok
Test start/stop of router after addition of one guest network ... ===
TestName: test_01_start_stop_router_after_addition_of_one_guest_network |
Status : SUCCESS ===
ok
Test reboot of router after addition of one guest network ... === TestName:
test_02_reboot_router_after_addition_of_one_guest_network | Status : SUCCESS ===
ok
Test to change service offering of router after addition of one guest
network ... === TestName:
test_04_chg_srv_off_router_after_addition_of_one_guest_network | Status :
SUCCESS ===
ok
Test destroy of router after addition of one guest network ... ===
TestName: test_05_destroy_router_after_addition_of_one_guest_network | Status :
SUCCESS ===
ok
Test to stop and start router after creation of VPC ... === TestName:
test_01_stop_start_router_after_creating_vpc | Status : SUCCESS ===
ok
Test to reboot the router after creating a VPC ... === TestName:
test_02_reboot_router_after_creating_vpc | Status : SUCCESS ===
ok
Tests to change service offering of the Router after ... === TestName:
test_04_change_service_offerring_vpc | Status : SUCCESS ===
ok
Test to destroy the router after creating a VPC ... === TestName:
test_05_destroy_router_after_creating_vpc | Status : SUCCESS ===
ok
Test advanced zone virtual router ... === TestName:
test_advZoneVirtualRouter | Status : SUCCESS ===
ok
Test Multiple Deploy Virtual Machine ... === TestName:
test_deploy_vm_multiple | Status : SUCCESS ===
ok
Test Stop Virtual Machine ... === TestName: test_01_stop_vm | Status :
SUCCESS ===
ok
Test Start Virtual Machine ... === TestName: test_02_start_vm | Status :
SUCCESS ===
ok
Test Reboot Virtual Machine ... === TestName: test_03_reboot_vm | Status :
SUCCESS ===
ok
Test destroy Virtual Machine ... === TestName: test_06_destroy_vm | Status
: SUCCESS ===
ok
Test recover Virtual Machine ... === TestName: test_07_restore_vm | Status
: SUCCESS ===
ok
Test migrate VM ... === TestName: test_08_migrate_vm | Status : SUCCESS ===
ok
Test destroy(expunge) Virtual Machine ... === TestName: test_09_expunge_vm
| Status : SUCCESS ===
ok
Test reset virtual machine on reboot ... === TestName:
test_01_reset_vm_on_reboot | Status : SUCCESS ===
ok
----------------------------------------------------------------------
Ran 40 tests in 8349.607s
```
* Manual Tests
* Created Redundant Network Offering
* Created 2 VMs
* Acquired 1 new IP
* Created LB rule
* Opened FW
```
[wrodrigues@mct-wrodrigues-g9 ~]$ ssh root@192.168.23.8
The authenticity of host '192.168.23.8 (192.168.23.8)' can't be established.
ECDSA key fingerprint is ca:ae:de:89:e8:10:39:9d:c6:ff:ad:b3:87:db:d4:57.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '192.168.23.8' (ECDSA) to the list of known
hosts.
root@192.168.23.8's password:
# ping 8.8.8.8
PING 8.8.8.8 (8.8.8.8): 56 data bytes
64 bytes from 8.8.8.8: seq=0 ttl=48 time=10.955 ms
64 bytes from 8.8.8.8: seq=1 ttl=48 time=10.861 ms
^C
--- 8.8.8.8 ping statistics ---
2 packets transmitted, 2 packets received, 0% packet loss
round-trip min/avg/max = 10.861/10.908/10.955 ms
# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen
1000
link/ether 02:00:4d:f9:00:03 brd ff:ff:ff:ff:ff:ff
inet 10.1.1.67/24 brd 10.1.1.255 scope global eth0
valid_lft forever preferred_lft forever
inet6 fe80::4dff:fef9:3/64 scope link
valid_lft forever preferred_lft forever
# exit
Connection to 192.168.23.8 closed.
[wrodrigues@mct-wrodrigues-g9 ~]$ rm -rf ~/.ssh/known_hosts
[wrodrigues@mct-wrodrigues-g9 ~]$ ssh root@192.168.23.8
The authenticity of host '192.168.23.8 (192.168.23.8)' can't be established.
ECDSA key fingerprint is 6f:b0:b4:2f:f7:fb:69:a8:5b:eb:0f:ed:97:07:6e:8c.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '192.168.23.8' (ECDSA) to the list of known
hosts.
root@192.168.23.8's password:
# ping 8.8.8.8
PING 8.8.8.8 (8.8.8.8): 56 data bytes
64 bytes from 8.8.8.8: seq=0 ttl=48 time=14.027 ms
64 bytes from 8.8.8.8: seq=1 ttl=48 time=10.417 ms
^C
--- 8.8.8.8 ping statistics ---
2 packets transmitted, 2 packets received, 0% packet loss
round-trip min/avg/max = 10.417/12.222/14.027 ms
# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen
1000
link/ether 02:00:03:4c:00:04 brd ff:ff:ff:ff:ff:ff
inet 10.1.1.66/24 brd 10.1.1.255 scope global eth0
valid_lft forever preferred_lft forever
inet6 fe80::3ff:fe4c:4/64 scope link
valid_lft forever preferred_lft forever
#
```
---
If your project is set up for it, you can reply to this email and have your
reply appear on GitHub as well. If your project does not have this feature
enabled and wishes so, or if the feature is enabled but not working, please
contact infrastructure at infrastruct...@apache.org or file a JIRA ticket
with INFRA.
---
