I forgot to add - this is ACS 4.3.0 and CentOS 6.x... breth1-500 is the main bridge used for Shared Network (yes, I know, somewhat confusing name for the bridge...)
On 4 March 2015 at 17:07, Andrija Panic <andrija.pa...@gmail.com> wrote: > Hi people. > > on physical host, I was having breth1-500(bridge) with eth1(joined to this > bridge) - all defined manually in Centos network config files. > (when you boot physical host - this bridge is active of course) > > When I deploy new VM with Shared Network with vlan 500, new device is > created eth1.500 and joined to this bridge - which is fine, and then vnet0 > device from VM is also joined to the bridge... > > > > When I stop the last VM that is using this Shared Network, CloudStack > (agent?) removes eth1.500 from bridge (fine with me), and ***then removed > eth1 from bridge (which I manually configured !!!) and later stoped/removed > the whole bridge*** > > If you try to start new VM again (joined to Shared Network with vlan 500) > - then no bridge is available, VM is started, but no vnet device, no > breth1-500 bridge up, and no eth1.500 up. > No bridge was available - but also bridge was not created on the fly... > > > Is there any explanation - why the heck would my manually configured > bridge get deleted? > > -- > > Andrija Panić > -- Andrija Panić
