I don't really have any input on this. It should work in general, I just don't know about the ppp device setup specifics. I've only ever tried over VPN where the endpoints weren't on the KVM or mgmt server. I'd just treat the ppp device like the mgmt IP/interface of the KVM host, but I don't know about where his bridges are running, etc.
On Tue, Jun 24, 2014 at 2:25 PM, Mike Tutkowski < mike.tutkow...@solidfire.com> wrote: > Hey Marcus, > > Do you have any thoughts on this? > > Thanks! > Mike > > > On Tue, Jun 24, 2014 at 10:20 AM, Seif Eddine Jemli < > seifeddineje...@gmail.com> wrote: > >> Hi, >> >> I am trying to add a distant *KVM* host. I created a *VPN* for this >> >> purpose. >> I have a management server and a distant host now connected via a VPN (it >> is a point to point VPN). so KVM host has the ip address 10.0.0.1 on the >> ppp0 interface (specific to the VPN) and the MS has the address 10.0.0.100 >> on his ppp0 interface too. (point to point VPN). >> >> I didn't know how to configure the /etc/network/interfaces on the KVM >> host. >> I couldn't try much because any error can make the server inaccessible. >> The problem is that I am not sure if I can put the ppp0 in the >> /etc/network/interfaces, because it is not a physical interface. >> How can I configure the network? >> >> thanks >> > > > > -- > *Mike Tutkowski* > *Senior CloudStack Developer, SolidFire Inc.* > e: mike.tutkow...@solidfire.com > o: 303.746.7302 > Advancing the way the world uses the cloud > <http://solidfire.com/solution/overview/?video=play>*™* >
