> Did you try this with 4.4 yet? Can you please? Will do it now.
On 13 May 2014 22:21, Daan Hoogland <daan.hoogl...@gmail.com> wrote: > looks like a totally different setup then I have. I will give it a > try tomorrow. Did you try this with 4.4 yet? Can you please? > > On Tue, May 13, 2014 at 11:05 PM, Ian Duffy <i...@ianduffy.ie> wrote: > > Hi Daan, > > > > Took a quick look at this this evening as promised earlier on IRC. > > > > I've stopped using the Ubuntu + XenAPI setup, I never felt it worked > well. > > My alternative solution/setup is below, I can get a full environment up > in > > about 15mins. > > > > I have made a vagrant box of XenServer, the packer files that build this > > box can be found at: https://github.com/imduffy15/packer-xenserver > > > > I have placed the .box file on the github page of the project > > https://github.com/imduffy15/packer-xenserver/releases/tag/0.0.1 > > > > In brief it brings up XenServer 6.2 with two interfaces, NAT and > host-only. > > The host only interface has the IP address 192.168.56.10 and I did some > > iptables stuff to enable them to get internet access via the NAT > interface. > > (It takes a bit of time to boot) > > > > I've been looking at using the chef scripts by cloudops to create a > Mysql + > > NFS box. You can see a vagrant file for this over here: > > https://github.com/imduffy15/GSoC-2014/tree/master/MySQL_NFS this comes > up > > on the same host interface as the XenServer box and gets 192.168.56.5, it > > supplies NFS for /exports on this IP. MySQL is exposed via virtualbox > port > > forwarding due to ease with deploydb. I need to improve this to get the > > systemvms on there for the moment I use the download-templates.sh from > > > https://github.com/djs55/cloudstack-dev-vms/tree/master/cloudstack-infrastructure > > > > I run the Cloudstack 4.3 ( commit > c0cf817f1b2a53a23253679aa785f0db3219619a > > ) manager on my host machine which is joined to the host only network on > > 192.168.56.1. I compile it with: mvn -P impatient,systemvm clean install > > -DskipTests=true -T2C > > > > I use a slightly modified devcloud.cfg > > https://github.com/imduffy15/GSoC-2014/blob/master/devcloud.cfg > > > > General flow is as follows: > > > > 1) Start xenserver vm > > 2) Start nfs/mysql vm > > 3) Compile cloudstack deploy db > > 4) ssh into nfs vm, download systemvm templates > > 5) start up jetty > > 6) marvin to get devcloud going > > > > Planning to clean a lot of these up with CLOUDSTACK-6114. > > > > Hope this is useful. > > > > > > > > On 7 May 2014 20:32, Daan Hoogland <daan.hoogl...@gmail.com> wrote: > > > >> I am setting up a test env on my laptop using devcloud2 v4.3. I am > >> running the ms v4.4 in eclipse and the db on my laptop. I get the > >> following error: > >> > >> daan:~/cloudstack-4.4/cloudstack (4.4)> python > >> tools/marvin/marvin/deployDataCenter.py -i > >> tools/devcloud/devcloud-advanced.cfg > >> Traceback (most recent call last): > >> File "tools/marvin/marvin/deployDataCenter.py", line 579, in <module> > >> deploy.deploy() > >> File "tools/marvin/marvin/deployDataCenter.py", line 561, in deploy > >> self.loadCfg() > >> File "tools/marvin/marvin/deployDataCenter.py", line 523, in loadCfg > >> mgtDetails.apiKey, mgtDetails.securityKey = self.registerApiKey() > >> File "tools/marvin/marvin/deployDataCenter.py", line 492, in > >> registerApiKey > >> listuserRes = self.testClient.getApiClient().listUsers(listuser) > >> File > >> > "/Users/daan/cloudstack-4.4/cloudstack/tools/marvin/marvin/cloudstackAPI/cloudstackAPIClient.py", > >> line 600, in listUsers > >> response = self.connection.marvinRequest(command, > >> response_type=response, method=method) > >> File > >> > "/Users/daan/cloudstack-4.4/cloudstack/tools/marvin/marvin/cloudstackConnection.py", > >> line 266, in marvinRequest > >> method=method) > >> File > >> > "/Users/daan/cloudstack-4.4/cloudstack/tools/marvin/marvin/cloudstackConnection.py", > >> line 196, in request > >> raise c > >> requests.exceptions.ConnectionError: > >> HTTPConnectionPool(host='192.168.56.10', port=8096): Max retries > >> exceeded with url: > >> /client/api?account=admin&command=listUsers&response=json (Caused by > >> <class 'socket.error'>: [Errno 61] Connection refused) > >> > >> telnet port 8091 locally on my laptop works and from the devcloud to > >> my laptop as well but the port is not opened on the dev. So it makes > >> sense that the connection is refused. Not that it is opened. I set the > >> 'host' config item to the virtualbox gateway address, 192.168.56.1. > >> That didn't help. I don't see what config I should change. > >> > >> What should I change? Where didn't I look? > >> > >> -- > >> Daan > >> > > > > -- > Daan >
