Noji
This is very helpful - https://gist.github.com/ynojima/c30e1d5d08e500e49e64
I've done lots of wrappers on cloudmonkey - this looks very similar to
what i've done, i was missing the initial config portion of the zone,
now i'm closer to the full stack.
Thanks for sharing,
Regards
ilya
On 5/5/14, 6:25 PM, Yoshikazu Nojima wrote:
This is a CloudMonkey script to deploy a VXLAN enabled zone with KVM hypervisor.
https://gist.github.com/c30e1d5d08e500e49e64.git
This is a marvin config to deploy a VXLAN enabled zone with KVM hypervisor.
https://gist.github.com/ynojima/e104189410649f3a9c91
Since this scripts use VXLAN and KVM, network configuration portion
won't be your help, but I hope other portion will be your help.
FYI,
Internet explorer's developer tool has a feature to export HTTP request log.
The log would be good source to build API requests.
Regards,
Noji
2014-05-05 19:17 GMT-06:00 ilya musayev <ilya.mailing.li...@gmail.com>:
Hi Alena,
Thanks for the response -it is for Advanced Shared Zone (no vpc), i figured
i will probably have to do this on my own. If you can share the api calls in
the meantime, it would certainly help. I will get the delta's.
Or just high level overview of what commands/components need to be
configured.
Thanks
ilya
On 5/5/14, 5:03 PM, Alena Prokharchyk wrote:
Ilya, is it a basic zone or advance you are interested in? I have the
stack of API calls for Advance zone, but it might miss some information
that you might need - configuring traffic labels for example, number of
physical networks, number of traffic types supported by each physical
network, etc.
If its something that you need to repeat often for the certain setup, I
would suggest that the copying it from the firebug would be the best
approach for you as only you know what needs to be set for your zone and
to what details' extend.
-Alena.
On 5/5/14, 4:55 PM, "ilya musayev" <ilya.mailing.li...@gmail.com> wrote:
For the CloudStack Automation testing project, i'm looking for entire
flow of API commands or perhaps CloudMokey CLI equivalent commands to
mimic what Create a Zone Wizard does. VMware example would be ideal, but
i'm certain i can figure out difference if its not.
I know i can probably get the APIs from Chrome Debugger or Firefly in
mozilla, but it seems a bit excessive on the output.
Would anyone have it handy?
Thanks
ilya
