In fact I'd recommend removing the SR of the template from anything XenServer knows of. It just needs to exist on the SAN so it can be cloned for new SR root volumes.
On Sun, Jan 26, 2014 at 9:18 AM, Marcus Sorensen <shadow...@gmail.com> wrote: > Hm, well I guest that's dependent on how your SAN clone works. Ours > allows you to have a unique name for each clone, so we just name the > clone with the new root volume UUID. > > On Sun, Jan 26, 2014 at 9:00 AM, Mike Tutkowski > <mike.tutkow...@solidfire.com> wrote: >> Hey Marcus, >> >> One thing I thought of late last night was that an SR has a UUID associated >> with it. >> >> If I clone the SAN volume that houses the SR each time, I'll be giving >> XenServer SRs that have the same UUID. >> >> I guess I'll need to look into if there is some way to assign a new UUID to >> an existing SR. >> >> Perhaps you or Edison (or someone else) know about this off hand? >> >> Thanks >> >> >> On Sat, Jan 25, 2014 at 11:42 PM, Mike Tutkowski >> <mike.tutkow...@solidfire.com> wrote: >>> >>> Yeah, I see that now. I was thinking my situation here would be different >>> because in the XenServer case I was looking at, CloudStack was copying the >>> template down to an SR and that same SR was later used to also house the >>> root disk (two different SRs were not involved). >>> >>> Even though my case is different, with the approach you outlined about >>> creating a "special" SR for the template itself, it ends up amounting to a >>> similar concept. >>> >>> >>> On Sat, Jan 25, 2014 at 11:27 PM, Marcus Sorensen <shadow...@gmail.com> >>> wrote: >>>> >>>> Yes. That's what all of the storage types do, they save the name of >>>> the file, volume, etc (along with path if necessary) on primary >>>> storage where the template is copied. >>>> >>>> On Sat, Jan 25, 2014 at 11:01 PM, Mike Tutkowski >>>> <mike.tutkow...@solidfire.com> wrote: >>>> > It looks like I could use the template_spool_ref table's local path >>>> > and/or >>>> > install path to point to the name of the volume on the SAN that is to >>>> > be >>>> > cloned when we need a root volume from this template. >>>> > >>>> > Is that what you do? >>>> > >>>> > >>>> > On Sat, Jan 25, 2014 at 10:46 PM, Mike Tutkowski >>>> > <mike.tutkow...@solidfire.com> wrote: >>>> >> >>>> >> Maybe 2) can be made to work in the template_spool_ref table...I need >>>> >> to >>>> >> think about it a bit. >>>> >> >>>> >> >>>> >> On Sat, Jan 25, 2014 at 10:42 PM, Mike Tutkowski >>>> >> <mike.tutkow...@solidfire.com> wrote: >>>> >>> >>>> >>> Data disks are easier than root disks. >>>> >>> >>>> >>> To be more clear, I should say data disks are easier than root disks >>>> >>> that >>>> >>> use templates (root disks that use ISOs are about the same level of >>>> >>> difficulty as data disks). >>>> >>> >>>> >>> I could see it going either way: >>>> >>> >>>> >>> 1) Copy the template down once for each root disk >>>> >>> >>>> >>> or >>>> >>> >>>> >>> 2) Copy the template to an SR and clone the SAN volume the SR is on >>>> >>> as >>>> >>> needed >>>> >>> >>>> >>> 2) has the advantage of speed, but where do you store knowledge of >>>> >>> this >>>> >>> special SR (in the DB somewhere)? >>>> >>> >>>> >>> >>>> >>> On Sat, Jan 25, 2014 at 10:39 PM, Mike Tutkowski >>>> >>> <mike.tutkow...@solidfire.com> wrote: >>>> >>>> >>>> >>>> Do you still send your SAN commands from the KVM agent? >>>> >>>> >>>> >>>> I don't have any SolidFire-specific commands outside of the >>>> >>>> SolidFire >>>> >>>> plug-in. >>>> >>>> >>>> >>>> >>>> >>>> On Sat, Jan 25, 2014 at 10:38 PM, Marcus Sorensen >>>> >>>> <shadow...@gmail.com> >>>> >>>> wrote: >>>> >>>>> >>>> >>>>> Actually, I shouldn't take the liberty to speak as though I >>>> >>>>> understand >>>> >>>>> the details about how you use SRs and VDIs. My point though is >>>> >>>>> basically that you probably can and should treat them the same as >>>> >>>>> whatever you currently do with data disks. Either create a new one >>>> >>>>> with every root volume create and copy the template contents to it >>>> >>>>> (like CLVM does), or create one on the SAN when the template copy >>>> >>>>> is >>>> >>>>> called, prepopulate it with the template, and send a clone command >>>> >>>>> against that one to your storage to generate new root disks as >>>> >>>>> needed. >>>> >>>>> >>>> >>>>> On Sat, Jan 25, 2014 at 10:30 PM, Marcus Sorensen >>>> >>>>> <shadow...@gmail.com> >>>> >>>>> wrote: >>>> >>>>> > And when I say 'the first time the template is used, we create an >>>> >>>>> > SR', >>>> >>>>> > I mean cloudstack does it automatically. >>>> >>>>> > >>>> >>>>> > On Sat, Jan 25, 2014 at 10:29 PM, Marcus Sorensen >>>> >>>>> > <shadow...@gmail.com> wrote: >>>> >>>>> >> Not's not really what I was describing, or that's not how we do >>>> >>>>> >> it >>>> >>>>> >> at >>>> >>>>> >> least. The first time a template is used, we create an SR with >>>> >>>>> >> one >>>> >>>>> >> VDI >>>> >>>>> >> (using your terminology as we don't do it in Xen, but it should >>>> >>>>> >> map >>>> >>>>> >> to >>>> >>>>> >> essentially the same thing) and copy the template contents into >>>> >>>>> >> it. >>>> >>>>> >> Then we remove the SR. When a root disk is requested, we send a >>>> >>>>> >> clone >>>> >>>>> >> command to the SAN, and then register the new clone as a new >>>> >>>>> >> volume, >>>> >>>>> >> then attach that as a new SR dedicated to that root volume. >>>> >>>>> >> Every >>>> >>>>> >> root >>>> >>>>> >> disk that makes use of that template is its own SR. >>>> >>>>> >> >>>> >>>>> >> On Sat, Jan 25, 2014 at 9:30 PM, Mike Tutkowski >>>> >>>>> >> <mike.tutkow...@solidfire.com> wrote: >>>> >>>>> >>> Thanks for your input, Marcus. >>>> >>>>> >>> >>>> >>>>> >>> Yeah, the SolidFire SAN has the ability to clone, but I can't >>>> >>>>> >>> use >>>> >>>>> >>> it in this >>>> >>>>> >>> case. >>>> >>>>> >>> >>>> >>>>> >>> Little note first: I'm going to put some words below in capital >>>> >>>>> >>> letters to >>>> >>>>> >>> stress some important details. All caps for some words can be >>>> >>>>> >>> annoying to >>>> >>>>> >>> some, so please understand that I am only using them here to >>>> >>>>> >>> highlight >>>> >>>>> >>> important details. :) >>>> >>>>> >>> >>>> >>>>> >>> For managed storage (SolidFire is an example of this), this is >>>> >>>>> >>> what >>>> >>>>> >>> happens >>>> >>>>> >>> when a user attaches a volume to a VM for the first time (so >>>> >>>>> >>> this >>>> >>>>> >>> is for >>>> >>>>> >>> Disk Offerings...not root disks): >>>> >>>>> >>> >>>> >>>>> >>> 1) A volume (LUN) is created on the SolidFire SAN that is ONLY >>>> >>>>> >>> ever >>>> >>>>> >>> used by >>>> >>>>> >>> this ONE CloudStack volume. This volume has QoS settings like >>>> >>>>> >>> Min, >>>> >>>>> >>> Max, and >>>> >>>>> >>> Burst IOPS. >>>> >>>>> >>> >>>> >>>>> >>> 2) An SR is created in the XenServer resource pool (cluster) >>>> >>>>> >>> that >>>> >>>>> >>> makes use >>>> >>>>> >>> of the SolidFire volume that was just created. >>>> >>>>> >>> >>>> >>>>> >>> 3) A VDI that represents the disk is created on the SR (this >>>> >>>>> >>> VDI >>>> >>>>> >>> essentially >>>> >>>>> >>> consumes as much of the SR as it can*). >>>> >>>>> >>> >>>> >>>>> >>> If the user wants to create a new CloudStack volume to attach >>>> >>>>> >>> to a >>>> >>>>> >>> VM, that >>>> >>>>> >>> leads to a NEW SolidFire volume being created (with its own >>>> >>>>> >>> QoS), a >>>> >>>>> >>> NEW SR, >>>> >>>>> >>> and a new VDI inside of that SR. >>>> >>>>> >>> >>>> >>>>> >>> The same idea will exist for root volumes. A NEW SolidFire >>>> >>>>> >>> volume >>>> >>>>> >>> will be >>>> >>>>> >>> created for it. A NEW SR will consume the SolidFire volume, and >>>> >>>>> >>> only ONE >>>> >>>>> >>> root disk will EVER use this SR (so there is never a need to >>>> >>>>> >>> clone >>>> >>>>> >>> the >>>> >>>>> >>> template we download to this SR). >>>> >>>>> >>> >>>> >>>>> >>> The next time a root disk of this type is requested, this leads >>>> >>>>> >>> to >>>> >>>>> >>> a NEW >>>> >>>>> >>> SolidFire volume (with its own QoS), a NEW SR, and a new VDI. >>>> >>>>> >>> >>>> >>>>> >>> In the situation you describe (which is called non-managed >>>> >>>>> >>> (meaning >>>> >>>>> >>> the SR >>>> >>>>> >>> was created ahead of time outside of CloudStack)), you can have >>>> >>>>> >>> multiple >>>> >>>>> >>> root disks that leverage the same template on the same SR. This >>>> >>>>> >>> will never >>>> >>>>> >>> be the case for managed storage, so there will never be a need >>>> >>>>> >>> for >>>> >>>>> >>> a >>>> >>>>> >>> downloaded template to be cloned multiple times into multiple >>>> >>>>> >>> root >>>> >>>>> >>> disks. >>>> >>>>> >>> >>>> >>>>> >>> By the way, I just want to clarify, as well, that although I am >>>> >>>>> >>> talking in >>>> >>>>> >>> terms of "SolidFire this an SolidFire that" that the >>>> >>>>> >>> functionality >>>> >>>>> >>> I have >>>> >>>>> >>> been adding to CloudStack (outside of the SolidFire plug-in) >>>> >>>>> >>> can be >>>> >>>>> >>> leveraged by any storage vendor that wants a 1:1 mapping >>>> >>>>> >>> between a >>>> >>>>> >>> CloudStack volume and one of their volumes. This is, in fact, >>>> >>>>> >>> how >>>> >>>>> >>> OpenStack >>>> >>>>> >>> handles storage by default. >>>> >>>>> >>> >>>> >>>>> >>> Does that clarify my question? >>>> >>>>> >>> >>>> >>>>> >>> I was not aware of how CLVM handled templates. Perhaps I should >>>> >>>>> >>> look into >>>> >>>>> >>> that. >>>> >>>>> >>> >>>> >>>>> >>> By the way, I am currently focused on XenServer, but also plan >>>> >>>>> >>> to >>>> >>>>> >>> implement >>>> >>>>> >>> support for this on KVM and ESX (although those may be outside >>>> >>>>> >>> of >>>> >>>>> >>> the scope >>>> >>>>> >>> of 4.4). >>>> >>>>> >>> >>>> >>>>> >>> Thanks! >>>> >>>>> >>> >>>> >>>>> >>> * It consumes as much of the SR as it can unless you you want >>>> >>>>> >>> extra >>>> >>>>> >>> space >>>> >>>>> >>> put aside for hypervisor snapshots. >>>> >>>>> >>> >>>> >>>>> >>> >>>> >>>>> >>> On Sat, Jan 25, 2014 at 3:43 AM, Marcus Sorensen >>>> >>>>> >>> <shadow...@gmail.com> >>>> >>>>> >>> wrote: >>>> >>>>> >>>> >>>> >>>>> >>>> In other words, if you can't clone, then >>>> >>>>> >>>> createDiskFromTemplate >>>> >>>>> >>>> should >>>> >>>>> >>>> copy template from secondary storage directly onto root disk >>>> >>>>> >>>> every >>>> >>>>> >>>> time, and copyPhysicalDisk really does nothing. If you can >>>> >>>>> >>>> clone, >>>> >>>>> >>>> then >>>> >>>>> >>>> copyPhysicalDisk should copy template to primary, and >>>> >>>>> >>>> createDiskFromTemplate should clone. Unless there's template >>>> >>>>> >>>> cloning >>>> >>>>> >>>> in the storage driver now, and if so put the >>>> >>>>> >>>> createDiskFromTemplate >>>> >>>>> >>>> logic there, but you still probably need copyPhysicalDisk to >>>> >>>>> >>>> do >>>> >>>>> >>>> its >>>> >>>>> >>>> thing on the agent. >>>> >>>>> >>>> >>>> >>>>> >>>> This is all from a KVM perspective, of course. >>>> >>>>> >>>> >>>> >>>>> >>>> On Sat, Jan 25, 2014 at 3:40 AM, Marcus Sorensen >>>> >>>>> >>>> <shadow...@gmail.com> >>>> >>>>> >>>> wrote: >>>> >>>>> >>>> > I'm not quite following. With our storage, the template >>>> >>>>> >>>> > gets >>>> >>>>> >>>> > copied >>>> >>>>> >>>> > to the storage pool upon first use, and then cloned upon >>>> >>>>> >>>> > subsequent >>>> >>>>> >>>> > uses. I don't remember all of the methods immediately, but >>>> >>>>> >>>> > there's one >>>> >>>>> >>>> > called to copy the template to primary storage, and once >>>> >>>>> >>>> > that's >>>> >>>>> >>>> > done >>>> >>>>> >>>> > as you mention it's tracked in template_spool_ref and when >>>> >>>>> >>>> > root >>>> >>>>> >>>> > disks >>>> >>>>> >>>> > are created that's passed as the source to copy when >>>> >>>>> >>>> > creating >>>> >>>>> >>>> > root >>>> >>>>> >>>> > disks. >>>> >>>>> >>>> > >>>> >>>>> >>>> > Are you saying that you don't have clone capabilities to >>>> >>>>> >>>> > clone >>>> >>>>> >>>> > the >>>> >>>>> >>>> > template when root disks are created? If so, you'd be more >>>> >>>>> >>>> > like >>>> >>>>> >>>> > CLVM >>>> >>>>> >>>> > storage, where the template copy actually does nothing, and >>>> >>>>> >>>> > you >>>> >>>>> >>>> > initiate a template copy *in place* of the clone (or you do >>>> >>>>> >>>> > a >>>> >>>>> >>>> > template >>>> >>>>> >>>> > copy to primary pool whenever the clone normally would >>>> >>>>> >>>> > happen). >>>> >>>>> >>>> > CLVM >>>> >>>>> >>>> > creates a fresh root disk and copies the template from >>>> >>>>> >>>> > secondary >>>> >>>>> >>>> > storage directly to that whenever a root disk is deployed, >>>> >>>>> >>>> > bypassing >>>> >>>>> >>>> > templates altogether. This is because it can't efficiently >>>> >>>>> >>>> > clone, and >>>> >>>>> >>>> > if we let the template copy to primary, it will then do a >>>> >>>>> >>>> > full >>>> >>>>> >>>> > copy of >>>> >>>>> >>>> > that template from primary to primary every time, which is >>>> >>>>> >>>> > pretty >>>> >>>>> >>>> > heavy since it's also not thin provisioned. >>>> >>>>> >>>> > >>>> >>>>> >>>> > If you *can* clone, then just copy the template to your >>>> >>>>> >>>> > primary >>>> >>>>> >>>> > storage as normal in your storage adaptor >>>> >>>>> >>>> > (copyPhysicalDisk), it >>>> >>>>> >>>> > will >>>> >>>>> >>>> > be tracked in template_spool_ref, and then when root disks >>>> >>>>> >>>> > are >>>> >>>>> >>>> > created >>>> >>>>> >>>> > it will be passed to createDiskFromTemplate in your storage >>>> >>>>> >>>> > adaptor >>>> >>>>> >>>> > (for KVM), where you can call a clone of that and return it >>>> >>>>> >>>> > as >>>> >>>>> >>>> > the >>>> >>>>> >>>> > root volume . There was once going to be template clone >>>> >>>>> >>>> > capabilities >>>> >>>>> >>>> > in the storage driver level on the mgmt server, but I >>>> >>>>> >>>> > believe >>>> >>>>> >>>> > that was >>>> >>>>> >>>> > work-in-progress last I checked (4 months ago or so), so we >>>> >>>>> >>>> > still have >>>> >>>>> >>>> > to call clone to our storage server from the agent side as >>>> >>>>> >>>> > of >>>> >>>>> >>>> > now, but >>>> >>>>> >>>> > that call doesn't have to do any work on the agent-side, >>>> >>>>> >>>> > really. >>>> >>>>> >>>> > >>>> >>>>> >>>> > >>>> >>>>> >>>> > On Sat, Jan 25, 2014 at 12:47 AM, Mike Tutkowski >>>> >>>>> >>>> > <mike.tutkow...@solidfire.com> wrote: >>>> >>>>> >>>> >> Just wanted to throw this out there before I went to bed: >>>> >>>>> >>>> >> >>>> >>>>> >>>> >> Since each root volume that belongs to managed storage will >>>> >>>>> >>>> >> get >>>> >>>>> >>>> >> its own >>>> >>>>> >>>> >> copy >>>> >>>>> >>>> >> of some template (assuming we're dealing with templates >>>> >>>>> >>>> >> here >>>> >>>>> >>>> >> and not an >>>> >>>>> >>>> >> ISO), it is possible I may be able to circumvent a new >>>> >>>>> >>>> >> table >>>> >>>>> >>>> >> (or any >>>> >>>>> >>>> >> existing table like template_spool_ref) entirely for >>>> >>>>> >>>> >> managed >>>> >>>>> >>>> >> storage. >>>> >>>>> >>>> >> >>>> >>>>> >>>> >> The purpose of a table like template_spool_ref appears to >>>> >>>>> >>>> >> be >>>> >>>>> >>>> >> mainly to >>>> >>>>> >>>> >> make >>>> >>>>> >>>> >> sure we're not downloading the sample template to an SR >>>> >>>>> >>>> >> multiple times >>>> >>>>> >>>> >> (and >>>> >>>>> >>>> >> this doesn't apply in the case of managed storage since >>>> >>>>> >>>> >> each >>>> >>>>> >>>> >> root >>>> >>>>> >>>> >> volume >>>> >>>>> >>>> >> should have at most one template downloaded to it). >>>> >>>>> >>>> >> >>>> >>>>> >>>> >> Thoughts on that? >>>> >>>>> >>>> >> >>>> >>>>> >>>> >> Thanks! >>>> >>>>> >>>> >> >>>> >>>>> >>>> >> >>>> >>>>> >>>> >> On Sat, Jan 25, 2014 at 12:39 AM, Mike Tutkowski >>>> >>>>> >>>> >> <mike.tutkow...@solidfire.com> wrote: >>>> >>>>> >>>> >>> >>>> >>>>> >>>> >>> Hi Edison and Marcus (and anyone else this may be of >>>> >>>>> >>>> >>> interest >>>> >>>>> >>>> >>> to), >>>> >>>>> >>>> >>> >>>> >>>>> >>>> >>> So, as of 4.3 I have added support for data disks for >>>> >>>>> >>>> >>> managed >>>> >>>>> >>>> >>> storage >>>> >>>>> >>>> >>> for >>>> >>>>> >>>> >>> XenServer, VMware, and KVM (a 1:1 mapping between a >>>> >>>>> >>>> >>> CloudStack >>>> >>>>> >>>> >>> volume >>>> >>>>> >>>> >>> and a >>>> >>>>> >>>> >>> volume on a storage system). One of the most useful >>>> >>>>> >>>> >>> abilities >>>> >>>>> >>>> >>> this >>>> >>>>> >>>> >>> enables >>>> >>>>> >>>> >>> is support for guaranteed storage quality of service in >>>> >>>>> >>>> >>> CloudStack. >>>> >>>>> >>>> >>> >>>> >>>>> >>>> >>> One of the areas I'm working on for CS 4.4 is root-disk >>>> >>>>> >>>> >>> support for >>>> >>>>> >>>> >>> managed storage (both with templates and ISOs). >>>> >>>>> >>>> >>> >>>> >>>>> >>>> >>> I'd like to get your opinion about something. >>>> >>>>> >>>> >>> >>>> >>>>> >>>> >>> I noticed when we download a template to a XenServer SR >>>> >>>>> >>>> >>> that >>>> >>>>> >>>> >>> we >>>> >>>>> >>>> >>> leverage a >>>> >>>>> >>>> >>> table in the DB called template_spool_ref. >>>> >>>>> >>>> >>> >>>> >>>>> >>>> >>> This table keeps track of whether or not we've downloaded >>>> >>>>> >>>> >>> the >>>> >>>>> >>>> >>> template >>>> >>>>> >>>> >>> in >>>> >>>>> >>>> >>> question to the SR in question already. >>>> >>>>> >>>> >>> >>>> >>>>> >>>> >>> The problem for managed storage is that the storage pool >>>> >>>>> >>>> >>> itself can be >>>> >>>>> >>>> >>> associated with many SRs (not all necessarily in the same >>>> >>>>> >>>> >>> cluster >>>> >>>>> >>>> >>> even): one >>>> >>>>> >>>> >>> SR per volume that belongs to the managed storage. >>>> >>>>> >>>> >>> >>>> >>>>> >>>> >>> What this means is every time a user wants to place a root >>>> >>>>> >>>> >>> disk (that >>>> >>>>> >>>> >>> uses >>>> >>>>> >>>> >>> a template) on managed storage, I will need to download a >>>> >>>>> >>>> >>> template to >>>> >>>>> >>>> >>> the >>>> >>>>> >>>> >>> applicable SR (the template will never be there in >>>> >>>>> >>>> >>> advance). >>>> >>>>> >>>> >>> >>>> >>>>> >>>> >>> That is fine. The issue is that I cannot use the >>>> >>>>> >>>> >>> template_spool_ref >>>> >>>>> >>>> >>> table >>>> >>>>> >>>> >>> because it is intended on mapping a template to a storage >>>> >>>>> >>>> >>> pool >>>> >>>>> >>>> >>> (1:1 >>>> >>>>> >>>> >>> mapping >>>> >>>>> >>>> >>> between the two) and managed storage can download the same >>>> >>>>> >>>> >>> template >>>> >>>>> >>>> >>> many >>>> >>>>> >>>> >>> times. >>>> >>>>> >>>> >>> >>>> >>>>> >>>> >>> It seems I will need to add a new table to the DB to >>>> >>>>> >>>> >>> support >>>> >>>>> >>>> >>> this >>>> >>>>> >>>> >>> feature. >>>> >>>>> >>>> >>> >>>> >>>>> >>>> >>> My table would allow a mapping between a template and a >>>> >>>>> >>>> >>> volume >>>> >>>>> >>>> >>> from >>>> >>>>> >>>> >>> managed storage. >>>> >>>>> >>>> >>> >>>> >>>>> >>>> >>> Do you see an easier way around this or is this how you >>>> >>>>> >>>> >>> recommend I >>>> >>>>> >>>> >>> proceed? >>>> >>>>> >>>> >>> >>>> >>>>> >>>> >>> Thanks! >>>> >>>>> >>>> >>> >>>> >>>>> >>>> >>> -- >>>> >>>>> >>>> >>> Mike Tutkowski >>>> >>>>> >>>> >>> Senior CloudStack Developer, SolidFire Inc. >>>> >>>>> >>>> >>> e: mike.tutkow...@solidfire.com >>>> >>>>> >>>> >>> o: 303.746.7302 >>>> >>>>> >>>> >>> Advancing the way the world uses the cloud™ >>>> >>>>> >>>> >> >>>> >>>>> >>>> >> >>>> >>>>> >>>> >> >>>> >>>>> >>>> >> >>>> >>>>> >>>> >> -- >>>> >>>>> >>>> >> Mike Tutkowski >>>> >>>>> >>>> >> Senior CloudStack Developer, SolidFire Inc. >>>> >>>>> >>>> >> e: mike.tutkow...@solidfire.com >>>> >>>>> >>>> >> o: 303.746.7302 >>>> >>>>> >>>> >> Advancing the way the world uses the cloud™ >>>> >>>>> >>> >>>> >>>>> >>> >>>> >>>>> >>> >>>> >>>>> >>> >>>> >>>>> >>> -- >>>> >>>>> >>> Mike Tutkowski >>>> >>>>> >>> Senior CloudStack Developer, SolidFire Inc. >>>> >>>>> >>> e: mike.tutkow...@solidfire.com >>>> >>>>> >>> o: 303.746.7302 >>>> >>>>> >>> Advancing the way the world uses the cloud™ >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> -- >>>> >>>> Mike Tutkowski >>>> >>>> Senior CloudStack Developer, SolidFire Inc. >>>> >>>> e: mike.tutkow...@solidfire.com >>>> >>>> o: 303.746.7302 >>>> >>>> Advancing the way the world uses the cloud™ >>>> >>> >>>> >>> >>>> >>> >>>> >>> >>>> >>> -- >>>> >>> Mike Tutkowski >>>> >>> Senior CloudStack Developer, SolidFire Inc. >>>> >>> e: mike.tutkow...@solidfire.com >>>> >>> o: 303.746.7302 >>>> >>> Advancing the way the world uses the cloud™ >>>> >> >>>> >> >>>> >> >>>> >> >>>> >> -- >>>> >> Mike Tutkowski >>>> >> Senior CloudStack Developer, SolidFire Inc. >>>> >> e: mike.tutkow...@solidfire.com >>>> >> o: 303.746.7302 >>>> >> Advancing the way the world uses the cloud™ >>>> > >>>> > >>>> > >>>> > >>>> > -- >>>> > Mike Tutkowski >>>> > Senior CloudStack Developer, SolidFire Inc. >>>> > e: mike.tutkow...@solidfire.com >>>> > o: 303.746.7302 >>>> > Advancing the way the world uses the cloud™ >>> >>> >>> >>> >>> -- >>> Mike Tutkowski >>> Senior CloudStack Developer, SolidFire Inc. >>> e: mike.tutkow...@solidfire.com >>> o: 303.746.7302 >>> Advancing the way the world uses the cloud™ >> >> >> >> >> -- >> Mike Tutkowski >> Senior CloudStack Developer, SolidFire Inc. >> e: mike.tutkow...@solidfire.com >> o: 303.746.7302 >> Advancing the way the world uses the cloud™
