Sounds good

I can:

1) sudo apt-get remove --purge cloudstack-agent

2) sudo apt-get clean

3) Switch to 4.2 branch

4) mvn -P developer,systemvm clean install

5) mvn -P developer -pl developer,tools/devcloud -Ddeploydb

6) Regenerate DEBs and install them



On Wed, Sep 25, 2013 at 6:13 PM, Marcus Sorensen <shadow...@gmail.com>wrote:

> You'll need to either remove the old debs or force install the new
> ones. Also, if any jars have moved location, you may have to delete
> the old ones in case they end up in the classpath of your jsvc
> command. I'd first try to generate 4.2 debs (or use the release
> artifacts), remove the old packages, install the new ones, then you'll
> have to clear the database and start fresh on 4.2.
>
> On Wed, Sep 25, 2013 at 6:09 PM, Mike Tutkowski
> <mike.tutkow...@solidfire.com> wrote:
> > By simply switching to 4.2, will CS use the proper version of Libvirt or
> is
> > there more I need to do since I've already run 4.3 on this Ubuntu
> install?
> >
> > Thanks
> >
> >
> > On Wed, Sep 25, 2013 at 6:07 PM, Mike Tutkowski <
> > mike.tutkow...@solidfire.com> wrote:
> >
> >> It's been a bit rough getting this up and running, but at least I've
> been
> >> learning about how CloudStack works on KVM, so that's really good.
> >>
> >>
> >> On Wed, Sep 25, 2013 at 6:03 PM, Mike Tutkowski <
> >> mike.tutkow...@solidfire.com> wrote:
> >>
> >>> I mean switch over to 4.2 from master. :)
> >>>
> >>>
> >>> On Wed, Sep 25, 2013 at 6:03 PM, Mike Tutkowski <
> >>> mike.tutkow...@solidfire.com> wrote:
> >>>
> >>>> I can switch my branch over to master. I'm afraid master is not
> working
> >>>> with Libvirt on Ubuntu, as well.
> >>>>
> >>>>
> >>>> On Wed, Sep 25, 2013 at 5:55 PM, Marcus Sorensen <shadow...@gmail.com
> >wrote:
> >>>>
> >>>>> It's harder still that you're trying to use master. I know 4.2 works
> >>>>> on ubuntu, but master is a minefield sometimes. Maybe that's not the
> >>>>> problem, but I do see emails going back and forth about libvirt/jna
> >>>>> versions, just need to read them in detail.
> >>>>>
> >>>>>  It's a shame that you haven't gotten a working config up yet prior
> to
> >>>>> development work (say a 4.2 that we know works), because we don't
> have
> >>>>> any clues as to whether it's your setup or master.
> >>>>>
> >>>>> On Wed, Sep 25, 2013 at 5:49 PM, Marcus Sorensen <
> shadow...@gmail.com>
> >>>>> wrote:
> >>>>> > ok, just a guess. I'm assuming it's still this:
> >>>>> >
> >>>>> > Caused by: java.lang.NoSuchMethodError: com.sun.jna.Native.free(J)V
> >>>>> >
> >>>>> > On Wed, Sep 25, 2013 at 5:48 PM, Mike Tutkowski
> >>>>> > <mike.tutkow...@solidfire.com> wrote:
> >>>>> >> mtutkowski@ubuntu:~$ sudo apt-get install libjna-java
> >>>>> >> Reading package lists... Done
> >>>>> >> Building dependency tree
> >>>>> >> Reading state information... Done
> >>>>> >> libjna-java is already the newest version.
> >>>>> >> libjna-java set to manually installed.
> >>>>> >> 0 upgraded, 0 newly installed, 0 to remove and 468 not upgraded.
> >>>>> >>
> >>>>> >>
> >>>>> >> On Wed, Sep 25, 2013 at 5:46 PM, Mike Tutkowski <
> >>>>> >> mike.tutkow...@solidfire.com> wrote:
> >>>>> >>
> >>>>> >>> Was there a step in the docs I may have missed where I was to
> >>>>> install
> >>>>> >>> them? I don't recall installing them, but there are several steps
> >>>>> and I
> >>>>> >>> might have forgotten that I did install them, too.
> >>>>> >>>
> >>>>> >>> I can check.
> >>>>> >>>
> >>>>> >>>
> >>>>> >>> On Wed, Sep 25, 2013 at 5:44 PM, Marcus Sorensen <
> >>>>> shadow...@gmail.com>wrote:
> >>>>> >>>
> >>>>> >>>> are you missing the jna packages?
> >>>>> >>>>
> >>>>> >>>> On Wed, Sep 25, 2013 at 5:40 PM, Mike Tutkowski
> >>>>> >>>> <mike.tutkow...@solidfire.com> wrote:
> >>>>> >>>> > I basically just leveraged the code you provided to redirect
> the
> >>>>> output
> >>>>> >>>> on
> >>>>> >>>> > Ubuntu.
> >>>>> >>>> >
> >>>>> >>>> > Here is the standard err:
> >>>>> >>>> >
> >>>>> >>>> > log4j:WARN No appenders could be found for logger
> >>>>> >>>> > (org.apache.commons.httpclient.params.DefaultHttpParams).
> >>>>> >>>> > log4j:WARN Please initialize the log4j system properly.
> >>>>> >>>> > log4j:WARN See
> >>>>> http://logging.apache.org/log4j/1.2/faq.html#noconfigfor
> >>>>> >>>> > more info.
> >>>>> >>>> > java.lang.reflect.InvocationTargetException
> >>>>> >>>> > at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
> >>>>> >>>> > at
> >>>>> >>>> >
> >>>>> >>>>
> >>>>>
> sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
> >>>>> >>>> > at
> >>>>> >>>> >
> >>>>> >>>>
> >>>>>
> sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
> >>>>> >>>> > at java.lang.reflect.Method.invoke(Method.java:606)
> >>>>> >>>> > at
> >>>>> >>>> >
> >>>>> >>>>
> >>>>>
> org.apache.commons.daemon.support.DaemonLoader.start(DaemonLoader.java:243)
> >>>>> >>>> > Caused by: java.lang.NoSuchMethodError:
> >>>>> com.sun.jna.Native.free(J)V
> >>>>> >>>> > at org.libvirt.Library.free(Unknown Source)
> >>>>> >>>> > at org.libvirt.Connect.getCapabilities(Unknown Source)
> >>>>> >>>> > at
> >>>>> >>>> >
> >>>>> >>>>
> >>>>>
> com.cloud.hypervisor.kvm.resource.LibvirtComputingResource.IsHVMEnabled(LibvirtComputingResource.java:4524)
> >>>>> >>>> > at
> >>>>> >>>> >
> >>>>> >>>>
> >>>>>
> com.cloud.hypervisor.kvm.resource.LibvirtComputingResource.configure(LibvirtComputingResource.java:753)
> >>>>> >>>> > at com.cloud.agent.Agent.<init>(Agent.java:168)
> >>>>> >>>> > at com.cloud.agent.AgentShell.launchAgent(AgentShell.java:439)
> >>>>> >>>> > at
> >>>>> >>>>
> >>>>>
> com.cloud.agent.AgentShell.launchAgentFromClassInfo(AgentShell.java:386)
> >>>>> >>>> > at com.cloud.agent.AgentShell.launchAgent(AgentShell.java:361)
> >>>>> >>>> > at com.cloud.agent.AgentShell.start(AgentShell.java:473)
> >>>>> >>>> > ... 5 more
> >>>>> >>>> > Cannot start daemon
> >>>>> >>>> > Service exit with a return value of 5
> >>>>> >>>> >
> >>>>> >>>> >
> >>>>> >>>> > On Wed, Sep 25, 2013 at 5:07 PM, Mike Tutkowski <
> >>>>> >>>> > mike.tutkow...@solidfire.com> wrote:
> >>>>> >>>> >
> >>>>> >>>> >> Sounds good.
> >>>>> >>>> >>
> >>>>> >>>> >> Thanks, Marcus! :)
> >>>>> >>>> >>
> >>>>> >>>> >>
> >>>>> >>>> >> On Wed, Sep 25, 2013 at 5:04 PM, Marcus Sorensen <
> >>>>> shadow...@gmail.com
> >>>>> >>>> >wrote:
> >>>>> >>>> >>
> >>>>> >>>> >>> Ok, so the next step is to track that stdout and see if you
> >>>>> can see
> >>>>> >>>> >>> what jsvc complains about when it fails to start up the
> >>>>> service.
> >>>>> >>>> >>>
> >>>>> >>>> >>> On Wed, Sep 25, 2013 at 4:56 PM, Mike Tutkowski
> >>>>> >>>> >>> <mike.tutkow...@solidfire.com> wrote:
> >>>>> >>>> >>> > These also look good:
> >>>>> >>>> >>> >
> >>>>> >>>> >>> > mtutkowski@ubuntu:/etc/cloudstack/agent$ uname -m
> >>>>> >>>> >>> > x86_64
> >>>>> >>>> >>> > mtutkowski@ubuntu:/etc/cloudstack/agent$ virsh -c
> >>>>> qemu:///system
> >>>>> >>>> list
> >>>>> >>>> >>> >  Id Name                 State
> >>>>> >>>> >>> > ----------------------------------
> >>>>> >>>> >>> >
> >>>>> >>>> >>> > mtutkowski@ubuntu:/etc/cloudstack/agent$ sudo ls -la
> >>>>> >>>> >>> > /var/run/libvirt/libvirt-sock
> >>>>> >>>> >>> > srwxrwx--- 1 root libvirtd 0 Sep 25 16:05
> >>>>> >>>> /var/run/libvirt/libvirt-sock
> >>>>> >>>> >>> > mtutkowski@ubuntu:/etc/cloudstack/agent$ ls -l /dev/kvm
> >>>>> >>>> >>> > crw-rw----+ 1 root kvm 10, 232 Sep 25 15:22 /dev/kvm
> >>>>> >>>> >>> >
> >>>>> >>>> >>> >
> >>>>> >>>> >>> >
> >>>>> >>>> >>> > On Wed, Sep 25, 2013 at 4:53 PM, Mike Tutkowski <
> >>>>> >>>> >>> > mike.tutkow...@solidfire.com> wrote:
> >>>>> >>>> >>> >
> >>>>> >>>> >>> >> This is my new agent.properties file (with comments
> >>>>> removed...looks
> >>>>> >>>> >>> >> decent):
> >>>>> >>>> >>> >>
> >>>>> >>>> >>> >> guid=6b4aa1c2-2ac9-3c60-aabe-704aed40c684
> >>>>> >>>> >>> >>
> >>>>> resource=com.cloud.hypervisor.kvm.resource.LibvirtComputingResource
> >>>>> >>>> >>> >> workers=5
> >>>>> >>>> >>> >> host=192.168.233.1
> >>>>> >>>> >>> >> port=8250
> >>>>> >>>> >>> >> cluster=1
> >>>>> >>>> >>> >> pod=1
> >>>>> >>>> >>> >> zone=1
> >>>>> >>>> >>> >> local.storage.uuid=aced86a2-2dd6-450a-93e5-1bc0ec3c73be
> >>>>> >>>> >>> >> private.network.device=cloudbr0
> >>>>> >>>> >>> >> public.network.device=cloudbr0
> >>>>> >>>> >>> >> guest.network.device=cloudbr0
> >>>>> >>>> >>> >>
> >>>>> >>>> >>> >> Yeah, I was always writing stuff out using the logger. I
> >>>>> should
> >>>>> >>>> look
> >>>>> >>>> >>> into
> >>>>> >>>> >>> >> redirecting stdout and stderr.
> >>>>> >>>> >>> >>
> >>>>> >>>> >>> >> Here were my steps to start and check the process status:
> >>>>> >>>> >>> >>
> >>>>> >>>> >>> >> mtutkowski@ubuntu:/etc/cloudstack/agent$ sudo
> >>>>> /usr/sbin/service
> >>>>> >>>> >>> >> cloudstack-agent start
> >>>>> >>>> >>> >>  * Starting CloudStack Agent cloudstack-agent
> >>>>> >>>> >>> >>                                                      [
> OK ]
> >>>>> >>>> >>> >> mtutkowski@ubuntu:/etc/cloudstack/agent$ sudo ps -ef |
> >>>>> grep jsvc
> >>>>> >>>> >>> >> 1000      4605  3725  0 16:47 pts/1    00:00:00 grep
> >>>>> --color=auto
> >>>>> >>>> jsvc
> >>>>> >>>> >>> >>
> >>>>> >>>> >>> >> Also, this might be of interest:
> >>>>> >>>> >>> >>
> >>>>> >>>> >>> >> mtutkowski@ubuntu:/etc/cloudstack/agent$ lsmod | grep
> kvm
> >>>>> >>>> >>> >> kvm_intel             137721  0
> >>>>> >>>> >>> >> kvm                   415549  1 kvm_intel
> >>>>> >>>> >>> >>
> >>>>> >>>> >>> >> mtutkowski@ubuntu:/etc/cloudstack/agent$ egrep -c
> >>>>> '(vmx|svm)'
> >>>>> >>>> >>> >> /proc/cpuinfo
> >>>>> >>>> >>> >> 1
> >>>>> >>>> >>> >>
> >>>>> >>>> >>> >> mtutkowski@ubuntu:/etc/cloudstack/agent$ kvm-ok
> >>>>> >>>> >>> >> INFO: /dev/kvm exists
> >>>>> >>>> >>> >> KVM acceleration can be used
> >>>>> >>>> >>> >>
> >>>>> >>>> >>> >> mtutkowski@ubuntu:/etc/cloudstack/agent$ egrep -c ' lm '
> >>>>> >>>> /proc/cpuinfo
> >>>>> >>>> >>> >> 1
> >>>>> >>>> >>> >>
> >>>>> >>>> >>> >> On Wed, Sep 25, 2013 at 4:39 PM, Marcus Sorensen <
> >>>>> >>>> shadow...@gmail.com
> >>>>> >>>> >>> >wrote:
> >>>>> >>>> >>> >>
> >>>>> >>>> >>> >>> So you:
> >>>>> >>>> >>> >>>
> >>>>> >>>> >>> >>> 1. run that command
> >>>>> >>>> >>> >>> 2. get a brand new agent.properties as a result
> >>>>> >>>> >>> >>> 3. start the service
> >>>>> >>>> >>> >>>
> >>>>> >>>> >>> >>> but you don't see it in the process table?
> >>>>> >>>> >>> >>>
> >>>>> >>>> >>> >>> The agent's STDOUT doesn't go to the agent log, only
> log4j
> >>>>> stuff.
> >>>>> >>>> So
> >>>>> >>>> >>> >>> if there were an error not printed via logger you'd not
> >>>>> see it.
> >>>>> >>>>  I'm
> >>>>> >>>> >>> >>> not as familiar with the debian/ubuntu stuff off the top
> >>>>> of my
> >>>>> >>>> head,
> >>>>> >>>> >>> >>> but in /etc/init.d/cloudstack-agent on CentOS we do:
> >>>>> >>>> >>> >>>
> >>>>> >>>> >>> >>> start() {
> >>>>> >>>> >>> >>>     echo -n $"Starting $PROGNAME: "
> >>>>> >>>> >>> >>>     if hostname --fqdn >/dev/null 2>&1 ; then
> >>>>> >>>> >>> >>>         $JSVC -cp "$CLASSPATH" -pidfile "$PIDFILE" \
> >>>>> >>>> >>> >>>             -errfile $LOGDIR/cloudstack-agent.err
> -outfile
> >>>>> >>>> >>> >>> $LOGDIR/cloudstack-agent.out $CLASS
> >>>>> >>>> >>> >>>         RETVAL=$?
> >>>>> >>>> >>> >>>         echo
> >>>>> >>>> >>> >>>     else
> >>>>> >>>> >>> >>>
> >>>>> >>>> >>> >>>
> >>>>> >>>> >>> >>> Which sends STDOUT to cloudstack-agent.out and errors to
> >>>>> >>>> >>> >>> cloudstack-agent.err. You can look to see what Ubuntu
> does.
> >>>>> >>>> >>> >>>
> >>>>> >>>> >>> >>> Out of curiosity, what do you get when you do 'lsmod |
> >>>>> grep kvm'
> >>>>> >>>> ? I
> >>>>> >>>> >>> >>> know you didn't end up using it, but the devcloud-kvm
> >>>>> >>>> instructions for
> >>>>> >>>> >>> >>> vmware fusion tell you to ensure that your guest has
> >>>>> hardware
> >>>>> >>>> >>> >>> virtualization passthrough enabled, I'm wondering if it
> >>>>> isn't.
> >>>>> >>>> >>> >>>
> >>>>> >>>> >>> >>> On Wed, Sep 25, 2013 at 4:11 PM, Mike Tutkowski
> >>>>> >>>> >>> >>> <mike.tutkow...@solidfire.com> wrote:
> >>>>> >>>> >>> >>> > These results look good:
> >>>>> >>>> >>> >>> >
> >>>>> >>>> >>> >>> > mtutkowski@ubuntu:~$ sudo cloudstack-setup-agent -m
> >>>>> >>>> 192.168.233.1
> >>>>> >>>> >>> -z 1
> >>>>> >>>> >>> >>> -p 1
> >>>>> >>>> >>> >>> > -c 1 -g 6b4aa1c2-2ac9-3c60-aabe-704aed40c684 -a
> >>>>> >>>> --pubNic=cloudbr0
> >>>>> >>>> >>> >>> > --prvNic=cloudbr0 --guestNic=cloudbr0
> >>>>> >>>> >>> >>> > Starting to configure your system:
> >>>>> >>>> >>> >>> > Configure Apparmor ...        [OK]
> >>>>> >>>> >>> >>> > Configure Network ...         [OK]
> >>>>> >>>> >>> >>> > Configure Libvirt ...         [OK]
> >>>>> >>>> >>> >>> > Configure Firewall ...        [OK]
> >>>>> >>>> >>> >>> > Configure Nfs ...             [OK]
> >>>>> >>>> >>> >>> > Configure cloudAgent ...      [OK]
> >>>>> >>>> >>> >>> > CloudStack Agent setup is done!
> >>>>> >>>> >>> >>> >
> >>>>> >>>> >>> >>> > However, these results are the same:
> >>>>> >>>> >>> >>> >
> >>>>> >>>> >>> >>> > mtutkowski@ubuntu:~$ ps -ef | grep jsvc
> >>>>> >>>> >>> >>> > 1000      4314  3725  0 16:10 pts/1    00:00:00 grep
> >>>>> >>>> --color=auto
> >>>>> >>>> >>> jsvc
> >>>>> >>>> >>> >>> >
> >>>>> >>>> >>> >>> >
> >>>>> >>>> >>> >>> > On Wed, Sep 25, 2013 at 3:48 PM, Mike Tutkowski <
> >>>>> >>>> >>> >>> > mike.tutkow...@solidfire.com> wrote:
> >>>>> >>>> >>> >>> >
> >>>>> >>>> >>> >>> >> This appears to be the offending method:
> >>>>> >>>> >>> >>> >>
> >>>>> >>>> >>> >>> >>     public String parseCapabilitiesXML(String
> capXML) {
> >>>>> >>>> >>> >>> >>
> >>>>> >>>> >>> >>> >>         if (!_initialized) {
> >>>>> >>>> >>> >>> >>
> >>>>> >>>> >>> >>> >>             return null;
> >>>>> >>>> >>> >>> >>
> >>>>> >>>> >>> >>> >>         }
> >>>>> >>>> >>> >>> >>
> >>>>> >>>> >>> >>> >>         try {
> >>>>> >>>> >>> >>> >>
> >>>>> >>>> >>> >>> >>             _sp.parse(new InputSource(new
> >>>>> >>>> StringReader(capXML)),
> >>>>> >>>> >>> this);
> >>>>> >>>> >>> >>> >>
> >>>>> >>>> >>> >>> >>             return _capXML.toString();
> >>>>> >>>> >>> >>> >>
> >>>>> >>>> >>> >>> >>         } catch (SAXException se) {
> >>>>> >>>> >>> >>> >>
> >>>>> >>>> >>> >>> >>             s_logger.warn(se.getMessage());
> >>>>> >>>> >>> >>> >>
> >>>>> >>>> >>> >>> >>         } catch (IOException ie) {
> >>>>> >>>> >>> >>> >>
> >>>>> >>>> >>> >>> >>             s_logger.error(ie.getMessage());
> >>>>> >>>> >>> >>> >>
> >>>>> >>>> >>> >>> >>         }
> >>>>> >>>> >>> >>> >>
> >>>>> >>>> >>> >>> >>         return null;
> >>>>> >>>> >>> >>> >>
> >>>>> >>>> >>> >>> >>     }
> >>>>> >>>> >>> >>> >>
> >>>>> >>>> >>> >>> >>
> >>>>> >>>> >>> >>> >> The logging I do from this method (not shown above),
> >>>>> however,
> >>>>> >>>> >>> doesn't
> >>>>> >>>> >>> >>> seem
> >>>>> >>>> >>> >>> >> to end up in agent.log. Not sure why that is.
> >>>>> >>>> >>> >>> >>
> >>>>> >>>> >>> >>> >> We invoke this method and I log we're in this method
> as
> >>>>> the
> >>>>> >>>> first
> >>>>> >>>> >>> >>> thing I
> >>>>> >>>> >>> >>> >> do, but it doesn't show up in agent.log.
> >>>>> >>>> >>> >>> >>
> >>>>> >>>> >>> >>> >> The last message in agent.log is a line saying we are
> >>>>> right
> >>>>> >>>> before
> >>>>> >>>> >>> the
> >>>>> >>>> >>> >>> >> call to this method.
> >>>>> >>>> >>> >>> >>
> >>>>> >>>> >>> >>> >>
> >>>>> >>>> >>> >>>
> >>>>> >>>> >>> >>
> >>>>> >>>> >>> >>
> >>>>> >>>> >>> >>
> >>>>> >>>> >>> >> --
> >>>>> >>>> >>> >> *Mike Tutkowski*
> >>>>> >>>> >>> >> *Senior CloudStack Developer, SolidFire Inc.*
> >>>>> >>>> >>> >> e: mike.tutkow...@solidfire.com
> >>>>> >>>> >>> >> o: 303.746.7302
> >>>>> >>>> >>> >> Advancing the way the world uses the cloud<
> >>>>> >>>> >>> http://solidfire.com/solution/overview/?video=play>
> >>>>> >>>> >>> >> *™*
> >>>>> >>>> >>> >>
> >>>>> >>>> >>> >
> >>>>> >>>> >>> >
> >>>>> >>>> >>> >
> >>>>> >>>> >>> > --
> >>>>> >>>> >>> > *Mike Tutkowski*
> >>>>> >>>> >>> > *Senior CloudStack Developer, SolidFire Inc.*
> >>>>> >>>> >>> > e: mike.tutkow...@solidfire.com
> >>>>> >>>> >>> > o: 303.746.7302
> >>>>> >>>> >>> > Advancing the way the world uses the
> >>>>> >>>> >>> > cloud<http://solidfire.com/solution/overview/?video=play>
> >>>>> >>>> >>> > *™*
> >>>>> >>>> >>>
> >>>>> >>>> >>
> >>>>> >>>> >>
> >>>>> >>>> >>
> >>>>> >>>> >> --
> >>>>> >>>> >> *Mike Tutkowski*
> >>>>> >>>> >> *Senior CloudStack Developer, SolidFire Inc.*
> >>>>> >>>> >> e: mike.tutkow...@solidfire.com
> >>>>> >>>> >> o: 303.746.7302
> >>>>> >>>> >> Advancing the way the world uses the cloud<
> >>>>> >>>> http://solidfire.com/solution/overview/?video=play>
> >>>>> >>>> >> *™*
> >>>>> >>>> >>
> >>>>> >>>> >
> >>>>> >>>> >
> >>>>> >>>> >
> >>>>> >>>> > --
> >>>>> >>>> > *Mike Tutkowski*
> >>>>> >>>> > *Senior CloudStack Developer, SolidFire Inc.*
> >>>>> >>>> > e: mike.tutkow...@solidfire.com
> >>>>> >>>> > o: 303.746.7302
> >>>>> >>>> > Advancing the way the world uses the
> >>>>> >>>> > cloud<http://solidfire.com/solution/overview/?video=play>
> >>>>> >>>> > *™*
> >>>>> >>>>
> >>>>> >>>
> >>>>> >>>
> >>>>> >>>
> >>>>> >>> --
> >>>>> >>> *Mike Tutkowski*
> >>>>> >>> *Senior CloudStack Developer, SolidFire Inc.*
> >>>>> >>> e: mike.tutkow...@solidfire.com
> >>>>> >>> o: 303.746.7302
> >>>>> >>> Advancing the way the world uses the cloud<
> >>>>> http://solidfire.com/solution/overview/?video=play>
> >>>>> >>> *™*
> >>>>> >>>
> >>>>> >>
> >>>>> >>
> >>>>> >>
> >>>>> >> --
> >>>>> >> *Mike Tutkowski*
> >>>>> >> *Senior CloudStack Developer, SolidFire Inc.*
> >>>>> >> e: mike.tutkow...@solidfire.com
> >>>>> >> o: 303.746.7302
> >>>>> >> Advancing the way the world uses the
> >>>>> >> cloud<http://solidfire.com/solution/overview/?video=play>
> >>>>> >> *™*
> >>>>>
> >>>>
> >>>>
> >>>>
> >>>> --
> >>>> *Mike Tutkowski*
> >>>> *Senior CloudStack Developer, SolidFire Inc.*
> >>>> e: mike.tutkow...@solidfire.com
> >>>> o: 303.746.7302
> >>>> Advancing the way the world uses the cloud<
> http://solidfire.com/solution/overview/?video=play>
> >>>> *™*
> >>>>
> >>>
> >>>
> >>>
> >>> --
> >>> *Mike Tutkowski*
> >>> *Senior CloudStack Developer, SolidFire Inc.*
> >>> e: mike.tutkow...@solidfire.com
> >>> o: 303.746.7302
> >>> Advancing the way the world uses the cloud<
> http://solidfire.com/solution/overview/?video=play>
> >>> *™*
> >>>
> >>
> >>
> >>
> >> --
> >> *Mike Tutkowski*
> >> *Senior CloudStack Developer, SolidFire Inc.*
> >> e: mike.tutkow...@solidfire.com
> >> o: 303.746.7302
> >> Advancing the way the world uses the cloud<
> http://solidfire.com/solution/overview/?video=play>
> >> *™*
> >>
> >
> >
> >
> > --
> > *Mike Tutkowski*
> > *Senior CloudStack Developer, SolidFire Inc.*
> > e: mike.tutkow...@solidfire.com
> > o: 303.746.7302
> > Advancing the way the world uses the
> > cloud<http://solidfire.com/solution/overview/?video=play>
> > *™*
>



-- 
*Mike Tutkowski*
*Senior CloudStack Developer, SolidFire Inc.*
e: mike.tutkow...@solidfire.com
o: 303.746.7302
Advancing the way the world uses the
cloud<http://solidfire.com/solution/overview/?video=play>
*™*

Reply via email to