Hi All, Thanks for your inputs. I have tried with the suggested changes but could not get it working. I started from scratch again to see if it helps. But I seem to be going wrong in some place.
Can some one kinldy go though the below setup and tell me if its right. I am stuck since a week trying to get this running :( I have the following setup: Cloudstack Management Server Port 20 of Switch (Trunk all + with necessary Vlans) Hypervisor (Ubuntu + KVM) Port 22 of Switch (Trunk all + with necessary Vlans) I am thinking of having the following networks/sub-networks: mgmt/public/private/storage - 172.16.10.0/24 network Mangement Server - 172.16.10.1, Hypervisor – 172.16.10.10 Public 172.16.10.20 - 172.16.10.30 Private (System VMs e.t.c) 172.16.10.31 - 172.16.10.200 Guest 10.1.1.0/24 *Server Side Configuration* CloudStack Server: eth0 Corporate lab ip (lets say 1.1.1.1) eth1.3100 Subinterface of Eth1 with Vlan 3100, IP: 172.16.10.1 *Global settings* system.vm.use.local.storage = true *Zone Creation Wizard for Advanced Network * Name : Zone-1** DNS1 : 8.8.8.8 Internal DNS1 : 8.8.8.8 Hypervisor : KVM Guest CIDR = 10.1.1.0/24 Local Storage enabled = true *Network Setup* Physical Network 1 : Isolation Method Vlan mgmt -- ???????? gave cloudbr0 (on the hypervisor, I have eth1.3100 assigned with IP 172.16.10.10 for mgmt traffic, cant add a bridge to it) public -- cloudbr0 guest -- cloudbr1 *Public IP range * GW : 172.16.10.1/24 (ip of the CS server) Vlan : 3200 (Public traffic Vlan) IP range : 172.16.10.20 - 172.16.10.30 *POD* GW : 172.16.10.1/24 (ip of the CS server) IP Range (Private n/w) : 172.16.10.31 - 172.16.10.200 *Guest* - Skipped Vlan range for guest traffic *Cluster* Name : Cluster-1 Hypervisor : KVM *Host* Name : Corporate Lab IP for Host (lets say 2.2.2.2) username & password *Primary Storage* : Gets skipped as I have selected local storage to true. *Secondary Storage* Provider : NFS Name : SecondaryStorage-1 NFS Server : CS Server Corporate ip (1.1.1.1) path : /mnt/secondary *Hypervisor (Ubuntu 13.04 + KVM)* eth0 Corporate Lab ip (2.2.2.2) eth1.3100 172.16.10.10 GW: 172.16.10.1 eth1.3200 Added to bridge Cloudbr0 eth1.3300 Added to bridge Cloudbr1 Agent is setup properly and is able to communicate with the server. *Is this configuration correct or am I missing something??* I have seeded the SystemVM with the proper 4.2 templates as per Prasanna's suggestion today. My Setup due to some reason is not able to start the console proxy & SSVMs. Thanks in advance for your suggestions. regards, Sarath
