Do you have an example of /etc/network/interface config for the host in basic zone mode ?
Le 23/07/2013 04:54, Ahmad Emneina a écrit : > Hey Thomas, > > Basic zones dont explicitly work with vlans. If you have vlan's behind the > scenes, say native vlans, it shouldnt be an issue as long as your relevant > networks can route to each other. > > Say for example I have my management server sitting on the > 192.168.10.0/24segment with hosts, system vm's and guest vm's on the > 192.168.11.0/24 segment, there shouldnt be an issue. All assuming they can > communicate back and forth between those networks. HTH > > > On Mon, Jul 22, 2013 at 9:36 AM, Thomas Schneider < > thomas.schnei...@euskill.com> wrote: > >> Hi >> >> Do you have some examples of Basic Zone network configuration ? >> Is it possible to configure it without using different vlan ? >> >> At this stage I configured manually the network without using vlans and >> the consequence is that the System VM is stuck in starting mode. >> >> Best Regards, >> >> -- >> *Thomas Schneider* >> >> -- *Thomas Schneider* Directeur des Opérations Euskill SARL Web: www.euskill.com Mobile: +33 (0)6 19 26 47 76 Mail: thomas.schnei...@euskill.com 5 rue de Phalsbourg F-67000 Strasbourg
