So.... my vm for CSMan had 2GB RAM, but because it was only a 16GB disk, no swap partition had been created.
I created a 1GB swap file and now the setup completes and I can log in Thanks Hugo/Prasanna. Is there any documentation around memory requirements for the CloudStack management server(s) as the requirement has obviously gone up since 4.1... -----Original Message----- From: Trippie [mailto:trip...@gmail.com] On Behalf Of Hugo Trippaers Sent: 01 July 2013 19:30 To: dev@cloudstack.apache.org Subject: Re: Master build problem Hey Paul, That out-of-memory error in the ConfigurationServerImpl might be the root-cause. This would prevent cloudstack from completely initialising and one of the last initialisation steps is to enable the admin user. If you fix that you are a step closer. Cheers, Hugo On Jul 1, 2013, at 8:24 PM, Paul Angus <paul.an...@shapeblue.com> wrote: > I see the admin user getting added: > > 2013-07-01 19:14:04,739 TRACE [db.Transaction.Statement] > (Timer-1:null) Preparing: INSERT INTO `cloud`.`user` (id, uuid, > username, password, account_id, firstname, lastname, created, state, > user.default) VALUES (2, UUID(), 'admin', RAND(), 2, > 'admin','cloud',now(), 'disabled', 1) > > No other mention of admin. > > The other two classes you were looking for appear in errors: > > 2013-07-01 19:13:35,774 ERROR [cloud.api.ApiServlet] > (catalina-exec-1:null) unknown exception writing api response > java.lang.NullPointerException > at com.cloud.api.ApiServer.loginUser(ApiServer.java:784) > at com.cloud.api.ApiServlet.processRequest(ApiServlet.java:210) > at com.cloud.api.ApiServlet.doPost(ApiServlet.java:71) > at javax.servlet.http.HttpServlet.service(HttpServlet.java:637) > at javax.servlet.http.HttpServlet.service(HttpServlet.java:717) > at > org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290) > at > org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) > at > org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233) > at > org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191) > at > org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127) > at > org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102) > at > org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:555) > at > org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109) > at > org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:298) > at > org.apache.coyote.http11.Http11NioProcessor.process(Http11NioProcessor.java:889) > at > org.apache.coyote.http11.Http11NioProtocol$Http11ConnectionHandler.process(Http11NioProtocol.java:721) > at > org.apache.tomcat.util.net.NioEndpoint$SocketProcessor.run(NioEndpoint.java:2274) > at > java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1146) > at > java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615) > at java.lang.Thread.run(Thread.java:679) > 2013-07-01 19:13:35,781 DEBUG [cloud.api.ApiServlet] > (catalina-exec-1:null) ===END=== 10.0.0.17 -- POST null > 2013-07-01 19:13:38,271 TRACE [db.Transaction.Transaction] > (Timer-1:null) Took over the transaction: init > > ---------------------------------------------------------------------- > ------------------------- > > 2013-07-01 19:14:14,037 INFO [cloud.server.ConfigurationServerImpl] > (Timer-1:null) Processing updateKeyPairs > 2013-07-01 19:14:14,037 INFO [cloud.server.ConfigurationServerImpl] > (Timer-1:null) Systemvm keypairs not found in database. Need to store > them in the database > 2013-07-01 19:14:14,037 DEBUG [utils.script.Script] (Timer-1:null) > Executing: /bin/bash -c if [ -f /var/cloudstack/management/.ssh/id_rsa > ]; then rm -f /var/cloudstack/management/.ssh/id_rsa; fi; ssh-keygen > -t rsa -N '' -f /var/cloudstack/management/.ssh/id_rsa -q > 2013-07-01 19:14:14,055 WARN [utils.script.Script] (Timer-1:null) > Exception: /bin/bash -c if [ -f /var/cloudstack/management/.ssh/id_rsa > ]; then rm -f /var/cloudstack/management/.ssh/id_rsa; fi; ssh-keygen > -t rsa -N '' -f /var/cloudstack/management/.ssh/id_rsa -q > java.io.IOException: Cannot run program "/bin/bash": java.io.IOException: > error=12, Cannot allocate memory > at java.lang.ProcessBuilder.start(ProcessBuilder.java:488) > at com.cloud.utils.script.Script.execute(Script.java:183) > at com.cloud.utils.script.Script.runSimpleBashScript(Script.java:481) > at com.cloud.utils.script.Script.runSimpleBashScript(Script.java:471) > at > com.cloud.server.ConfigurationServerImpl.updateKeyPairs(ConfigurationServerImpl.java:627) > at > com.cloud.utils.component.ComponentInstantiationPostProcessor$InterceptorDispatcher.intercept(ComponentInstantiationPostProcessor.java:125) > at > com.cloud.server.ConfigurationServerImpl.persistDefaultValues(ConfigurationServerImpl.java:292) > at > com.cloud.utils.component.ComponentInstantiationPostProcessor$InterceptorDispatcher.intercept(ComponentInstantiationPostProcessor.java:125) > at > com.cloud.server.ConfigurationServerImpl.configure(ConfigurationServerImpl.java:157) > at > com.cloud.utils.component.ComponentContext.initComponentsLifeCycle(ComponentContext.java:111) > at > com.cloud.servlet.CloudStartupServlet$1.run(CloudStartupServlet.java:50) > at java.util.TimerThread.mainLoop(Timer.java:534) > at java.util.TimerThread.run(Timer.java:484) > Caused by: java.io.IOException: java.io.IOException: error=12, Cannot > allocate memory > at java.lang.UNIXProcess.<init>(UNIXProcess.java:164) > at java.lang.ProcessImpl.start(ProcessImpl.java:81) > at java.lang.ProcessBuilder.start(ProcessBuilder.java:470) > ... 20 more > 2013-07-01 19:14:14,056 ERROR [cloud.server.ConfigurationServerImpl] > (Timer-1:null) Cannot read the private key file > java.io.FileNotFoundException: /var/cloudstack/management/.ssh/id_rsa (No > such file or directory) > at java.io.FileInputStream.open(Native Method) > at java.io.FileInputStream.<init>(FileInputStream.java:137) > at > com.cloud.server.ConfigurationServerImpl.updateKeyPairs(ConfigurationServerImpl.java:631) > at > com.cloud.utils.component.ComponentInstantiationPostProcessor$InterceptorDispatcher.intercept(ComponentInstantiationPostProcessor.java:125) > at > com.cloud.server.ConfigurationServerImpl.persistDefaultValues(ConfigurationServerImpl.java:292) > at > com.cloud.utils.component.ComponentInstantiationPostProcessor$InterceptorDispatcher.intercept(ComponentInstantiationPostProcessor.java:125) > at > com.cloud.server.ConfigurationServerImpl.configure(ConfigurationServerImpl.java:157) > at > com.cloud.utils.component.ComponentContext.initComponentsLifeCycle(ComponentContext.java:111) > at > com.cloud.servlet.CloudStartupServlet$1.run(CloudStartupServlet.java:50) > at java.util.TimerThread.mainLoop(Timer.java:534) > at java.util.TimerThread.run(Timer.java:484) > > -----Original Message----- > From: Prasanna Santhanam [mailto:t...@apache.org] > Sent: 01 July 2013 16:38 > To: dev@cloudstack.apache.org > Subject: Re: Master build problem > > On Mon, Jul 01, 2013 at 08:44:28AM +0000, Paul Angus wrote: >> This was a completely fresh build from the 4.2 branch (oss). >> >> I don't use dev cloud as it's not representative of a real environment. I >> ran: >> > Should fail on devcloud too ideally. > >> yum install -y cloud-client # run against local 4.2 repo >> cloudstack-setup-databases cloud:cloud@$MYSQLIP >> --deploy-as=root:password cloudstack-setup-management >> > > Ok, thought you were running dev environment. If you see something like > "Admin user enabled" then everything went fine. Else we'll need to see the > management server logs to see if any of the classes has misbehaved or hasn't > done what it's supposed to do. > > You can also enable trace level log for two classes in particular that we're > chasing here: AccountManagerImpl and ConfigurationServerImpl. > > See #5 in the wiki https://cwiki.apache.org/confluence/x/5QL8AQ on how to > achieve this. > > com.cloud.user.AccountManagerImpl > com.cloud.server.ConfigurationServerImpl > >> that's it... >> >> as a work around I assume I can open the unauthenticated api port and >> create a user (which I know the password for)... > > Umm, the system user should also have been randomized credentials so you > won't be able to login. The security loophole here was fixed sometime ago. > > -- > Prasanna., > > ------------------------ > Powered by BigRock.com > > > This email and any attachments to it may be confidential and are intended > solely for the use of the individual to whom it is addressed. Any views or > opinions expressed are solely those of the author and do not necessarily > represent those of Shape Blue Ltd or related companies. If you are not the > intended recipient of this email, you must neither take any action based upon > its contents, nor copy or show it to anyone. Please contact the sender if you > believe you have received this email in error. Shape Blue Ltd is a company > incorporated in England & Wales. ShapeBlue Services India LLP is operated > under license from Shape Blue Ltd. ShapeBlue is a registered trademark. > This email and any attachments to it may be confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of Shape Blue Ltd or related companies. If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error. Shape Blue Ltd is a company incorporated in England & Wales. ShapeBlue Services India LLP is operated under license from Shape Blue Ltd. ShapeBlue is a registered trademark.
