Geoff can you file a bug for this ?
I will try to have a look at it on monday.
-Sebastien
On 15 Jun 2013, at 18:35, Geoff Higginbottom <geoff.higginbot...@shapeblue.com>
wrote:
> Hi Marcus,
>
> I have set asyncblock to true as I need to wait for the Physical Network to
> be created so I can then add a traffic type to it.
>
> I used to do this by capturing the ID of the Physical Network using the |
> grep ^id\ = | awk '{print $3}'` section of the 1st command, then use the
> output in the following add traffictype command (just like on the CloudMonkey
> wiki example)
>
> phy1_id=`$cli create physicalnetwork name=$phy1_name zoneid=$zone_id
> broadcastdomain=Zone | grep ^id\ = | awk '{print $3}'`
> $cli add traffictype traffictype=$phy1_tt physicalnetworkid=$phy1_id
>
> The problem is CloudMonkey is throwing an error, and not sending back the
> info correctly.
>
> My current 'work around' is to set the timeout to 10, accept that the console
> is going to throw out a load of errors, but ignore them then query the ID of
> the Physical Network in a 2nd command (using the name of the Physical Network
> I just created)
>
> $cli create physicalnetwork name=$phy1_name zoneid=$zone_id
> broadcastdomain=Zone
> phy1_id=`$cli list physicalnetworks name=$phy1_name | grep ^id\ = | awk
> '{print $3}'`
> $cli add traffictype traffictype=$phy1_tt physicalnetworkid=$phy1_id
>
> This seems to work, even when I am creating 4 Physical Networks one after
> another, but I would rather I did not have to use this workaround, its dirty.
>
> Regards
>
> Geoff Higginbottom
>
> D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581
>
> geoff.higginbot...@shapeblue.com
>
> -----Original Message-----
> From: Marcus Sorensen [mailto:shadow...@gmail.com]
> Sent: 15 June 2013 17:04
> To: dev@cloudstack.apache.org
> Subject: Re: CloudMonkey Broken
>
> Is your asyncblock parameter set to true? This mode isnt supposed to return a
> job id. Its supposed to block until the job is done, but something is wrong
> with it.
> On Jun 15, 2013 9:46 AM, "Geoff Higginbottom" <
> geoff.higginbot...@shapeblue.com> wrote:
>
>> I've been testing CloudMonkey against CloudStack 4.1 and am hitting
>> some problems.
>>
>> I've previously used CloudMonkey to deploy complete Clouds, but even
>> though I'm using scripts I've used successfully previously, it now
>> appears to be hanging when I try and use the 'create physicalnetwork'
>> command. The physicalnetwork does get created, it.s just giving any
>> feedback such as ID etc.
>>
>> Here is an example of the command I am using my full command
>>
>>> create physicalnetwork name=Management
>> zoneid=9eaff802-4060-4de7-bea9-36cbecce8f95 broadcastdomainrange=Zone
>> isolationmethods=VLAN
>>
>> Shanker has mentioned he has come across this as well, has anyone else
>> seen this, and if so is there a fix?
>>
>> Regards
>>
>> Geoff Higginbottom
>>
>> D: +44 20 3603 0542<tel:+442036030542> | S: +44 20 3603 0540<tel:
>> +442036030540> | M: +447968161581<tel:+447968161581>
>>
>> geoff.higginbot...@shapeblue.com<mailto:geoff.higginbottom@shapeblue.c
>> om>
>>
>> This email and any attachments to it may be confidential and are
>> intended solely for the use of the individual to whom it is addressed.
>> Any views or opinions expressed are solely those of the author and do
>> not necessarily represent those of Shape Blue Ltd or related
>> companies. If you are not the intended recipient of this email, you
>> must neither take any action based upon its contents, nor copy or show
>> it to anyone. Please contact the sender if you believe you have
>> received this email in error. Shape Blue Ltd is a company incorporated
>> in England & Wales. ShapeBlue Services India LLP is operated under
>> license from Shape Blue Ltd. ShapeBlue is a registered trademark.
>>
> This email and any attachments to it may be confidential and are intended
> solely for the use of the individual to whom it is addressed. Any views or
> opinions expressed are solely those of the author and do not necessarily
> represent those of Shape Blue Ltd or related companies. If you are not the
> intended recipient of this email, you must neither take any action based upon
> its contents, nor copy or show it to anyone. Please contact the sender if you
> believe you have received this email in error. Shape Blue Ltd is a company
> incorporated in England & Wales. ShapeBlue Services India LLP is operated
> under license from Shape Blue Ltd. ShapeBlue is a registered trademark.
>
