Thanks! I'll close the vote out this afternoon (US ET).
On Jun 1, 2013, at 8:07 AM, Prasanna Santhanam <t...@apache.org> wrote:
> Chip,
>
> My vote: +1 (binding)
>
> Thanks for allowing the extension. Hadn't had time to run the complete set of
> tests. Results here are posted for Advanced Zone with KVM in one cluster and
> XenServer in another. I took the chance to run some additional tests for
> regression, some are still running. Overall the report looks good.
>
> Note: The SSVM test failures can be ignored since I was using the more recent
> template from master. The issue is fixed on master.
>
> Test Report follows:
> ===================
> Artifact signatures (PASS)
> Artifact checksums (PASS)
> RAT Check (PASS)
> Generated RPMs (PASS)
>
> Detailed test run:
> (This had to be done manually for now, despite being automated, because of
> CLOUDSTACK-2758)
>
> (1052)[root@applecrumble 1052]# nosetests --with-marvin
> --marvin-config=cloud-autodeploy/xen.cfg --load
> test/integration/smoke/test_disk_offerings.py
> Test to create disk offering ... ok
> Test to update existing disk offering ... ok
> Test to delete disk offering ... ok
>
> ----------------------------------------------------------------------
> Ran 3 tests in 0.401s
>
> OK
> (1052)[root@applecrumble 1052]# nosetests --with-marvin
> --marvin-config=cloud-autodeploy/xen.cfg --load
> test/integration/smoke/test_deploy_vm.py
> Test Deploy Virtual Machine ...
>
> ok
>
> ----------------------------------------------------------------------
> Ran 1 test in 170.088s
>
> OK
>
> (1052)[root@applecrumble 1052]# nosetests --with-marvin
> --marvin-config=cloud-autodeploy/xen.cfg --load
> test/integration/smoke/test_deploy_vms_with_varied_deploymentplanners.py
> Test to deploy vm with a first fit offering ... ok
> Test deploy VMs using user concentrated planner ... ok
> Test deploy VMs using user dispersion planner ... ok
>
> ----------------------------------------------------------------------
> Ran 3 tests in 473.348s
>
> OK
>
> (1052)[root@applecrumble 1052]# nosetests --with-marvin
> --marvin-config=cloud-autodeploy/xen.cfg --load
> test/integration/smoke/test_regions.py
> Test for create region ... ok
>
> ----------------------------------------------------------------------
> Ran 1 test in 0.148s
>
> OK
>
> (1052)[root@applecrumble 1052]# nosetests --with-marvin
> --marvin-config=cloud-autodeploy/xen.cfg --load
> test/integration/smoke/test_secondary_storage.py
> Test system VM start ... ok
> Test system templates are ready ... ok
>
> ----------------------------------------------------------------------
> Ran 2 tests in 0.467s
>
> OK
>
> (1052)[root@applecrumble 1052]# nosetests --with-marvin
> --marvin-config=cloud-autodeploy/xen.cfg --load
> test/integration/smoke/test_ssvm.py
> Test List secondary storage VMs ... ok
> Test List console proxy VMs ... ok
> Test CPVM Internals ... ok
> Test stop CPVM ... ok
> Test reboot CPVM ... ok
> Test destroy CPVM ... ok
> Test SSVM Internals ... FAIL
> Test stop SSVM ... FAIL
> Test reboot SSVM ... FAIL
> Test destroy SSVM ... FAIL
>
> ======================================================================
> FAIL: Test SSVM Internals
> ----------------------------------------------------------------------
> Traceback (most recent call last):
> File
> "/var/lib/jenkins/workspace/test-environment-refresh/1052/test/integration/smoke/test_ssvm.py",
> line 351, in test_03_ssvm_internals
> "Check for Errors in tests"
> AssertionError: Check for Errors in tests
> -------------------- >> begin captured logging << --------------------
> testclient.testcase.TestSSVMs: DEBUG: Running SSVM check script
> sshClient: DEBUG: SSH connect: root@10.208.8.195 with passwd password
> sshClient: DEBUG: {Cmd: ssh -i ~/.ssh/id_rsa.cloud -ostricthostkeychecking=no
> -oUserKnownHostsFile=/dev/null -p 3922 169.254.1.218
> /usr/local/cloud/systemvm/ssvm-check.sh |grep -e ERROR -e WARNING -e FAIL via
> Host: 10.208.8.195} {returns: ['ERROR: Cannot write to mount point', 'Tests
> Complete. Look for ERROR or WARNING above.']}
> paramiko.transport: DEBUG: EOF in transport thread
> testclient.testcase.TestSSVMs: DEBUG: SSVM script output: ['ERROR: Cannot
> write to mount point', 'Tests Complete. Look for ERROR or WARNING above.']
> --------------------- >> end captured logging << ---------------------
>
> ----------------------------------------------------------------------
> Ran 10 tests in 595.764s
>
> FAILED (failures=4)
>
> (1052)[root@applecrumble 1052]# nosetests --with-marvin
> --marvin-config=cloud-autodeploy/xen.cfg --load
> test/integration/smoke/test_templates.py -a tags=advanced
> Test create public & private template ... ok
> Test Edit template ... ok
> Test delete template ... ok
> Test for extract template ... ok
> Update & Test for template permissions ... ok
> Test for copy template from one zone to another ... SKIP: Not enough zones
> available to perform copy template
> Test only public templates are visible to normal user ... ok
> Test System templates are not visible to normal user ... ok
>
> ----------------------------------------------------------------------
> Ran 8 tests in 1177.856s
>
> OK (SKIP=1)
>
> (1052)[root@applecrumble 1052]# nosetests --with-marvin
> --marvin-config=cloud-autodeploy/xen.cfg --load
> test/integration/smoke/test_iso.py -a tags=advanced
> Test create public & private ISO ... ok
> Test Edit ISO ... ok
> Test delete ISO ... ok
> Test for extract ISO ... ok
> Update & Test for ISO permissions ... ok
> Test for copy ISO from one zone to another ... SKIP: Not enough zones
> available to perform copy template
>
> ----------------------------------------------------------------------
> Ran 6 tests in 263.993s
>
> OK (SKIP=1)
>
> (1052)[root@applecrumble 1052]# nosetests --with-marvin
> --marvin-config=cloud-autodeploy/xen.cfg --load
> test/integration/smoke/test_routers.py -a tags=advanced
> Test router internal basic zone ... ok
> Test router internal advanced zone ... ok
> Test restart network ... ok
> Test restart network without cleanup ... ok
> Test router basic setup ... ok
> Test router advanced setup ... ok
> Test stop router ... ok
> Test start router ... ok
> Test reboot router ... ok
> Test network GC ... ok
>
> ----------------------------------------------------------------------
> Ran 10 tests in 1822.894s
>
> OK
>
> (1052)[root@applecrumble 1052]# nosetests --with-marvin
> --marvin-config=cloud-autodeploy/xen.cfg --load
> test/integration/smoke/test_volumes.py -a tags=advanced
> Attach a created Volume to a Running VM ... ok
> Download a Volume attached to a VM ... ok
> Delete a Volume attached to a VM ... ok
> Detach a Volume attached to a VM ... ok
> Download a Volume unattached to an VM ... ok
> Test resize (negative) non-existent volume ... ok
> Test resize a volume ... ok
> Delete a Volume unattached to an VM ... ok
>
> ----------------------------------------------------------------------
> Ran 8 tests in 2378.112s
>
> OK
>
> (1052)[root@applecrumble 1052]# nosetests --with-marvin
> --marvin-config=cloud-autodeploy/xen.cfg --load
> test/integration/smoke/test_vm_life_cycle.py -a tags='advanced'
> Test advanced zone virtual router ... ok
> Test Deploy Virtual Machine ... ok
> Test Stop Virtual Machine ... ok
> Test Start Virtual Machine ... ok
> Test Reboot Virtual Machine ... ok
> Test destroy Virtual Machine ... ok
> Test recover Virtual Machine ... ok
> Test migrate VM ... ok
> Test destroy(expunge) Virtual Machine ... ok
> Test for detach ISO to virtual machine ... ok
>
> ----------------------------------------------------------------------
> Ran 10 tests in 1355.943s
>
> OK
>
> (1052)[root@applecrumble 1052]# nosetests --with-marvin
> --marvin-config=cloud-autodeploy/xen.cfg --load
> test/integration/component/test_allocation_states.py -a tags='advanced'
> Check the status of zones ... ok
> Check the status of pods ... ok
> Check the status of clusters ... ok
> Check the status of hosts ... ok
> Check the status of Storage pools ... ok
> Check the status of secondary storage ... ok
>
> ----------------------------------------------------------------------
> Ran 6 tests in 0.150s
>
> OK
>
> (1052)[root@applecrumble 1052]# nosetests --with-marvin
> --marvin-config=cloud-autodeploy/xen.cfg --load
> test/integration/component/test_usage.py -a tags=advanced
> Test Create/Delete a ISO and verify its usage is generated correctly ... ok
> Test Create/Delete a LB rule and verify correct usage is recorded ... ok
> Test Create/Delete a PF rule and verify correct usage is recorded ... ok
> Test Assign new IP and verify usage calculation ... ok
> Test Create/Delete a manual snap shot and verify ... ok
> Test Upload/ delete a template and verify correct usage is generated ... ok
> Test Create/Destroy VM and verify usage calculation ... ok
> Test Create/delete a volume and verify correct usage is recorded ... ok
> Test Create/Delete a VPN and verify correct usage is recorded ... ok
>
> ----------------------------------------------------------------------
> Ran 9 tests in 1869.723s
>
> OK
>
> (1052)[root@applecrumble 1052]# nosetests --with-marvin
> --marvin-config=cloud-autodeploy/xen.cfg --load
> test/integration/component/test_vpn_users.py -a tags=advanced
> VPN remote access user limit tests ... ok
> Test create VPN when L2TP port in use ... ok
> Test create NAT rule when VPN when L2TP enabled ... ok
> Test add new users to existing VPN ... ok
> Test add duplicate user to existing VPN ... ok
> Test as global admin, add a new VPN user to an existing VPN entry ... ok
> Test as domain admin, add a new VPN user to an existing VPN entry ... ok
>
> ----------------------------------------------------------------------
> Ran 7 tests in 1628.889s
>
> OK
>
> (1052)[root@applecrumble 1052]# nosetests --with-marvin
> --marvin-config=cloud-autodeploy/xen.cfg --load
> test/integration/component/test_regions.py -a tags=advanced
> Test for duplicate checks on region id ... ok
> Test for duplicate checks on region name ... ok
> Test for update Region ... ok
>
> ----------------------------------------------------------------------
> Ran 3 tests in 0.221s
>
> OK
>
> (1052)[root@applecrumble 1052]# nosetests --with-marvin
> --marvin-config=cloud-autodeploy/xen.cfg --load
> test/integration/component/test_projects.py -a tags=advanced
> Verify No cross domain projects ... ok
> Test As long as the project exists, its owner can't be removed ... ok
> Test Verify a project user can be later promoted to become a ... ok
> Test Verify there can only be one owner of a project at a time ... ok
> Test Verify after an account is removed from the project, all his ... ok
> Test project activation after suspension ... ok
>
> ----------------------------------------------------------------------
> Ran 6 tests in 566.743s
>
> OK
>
> (1052)[root@applecrumble 1052]# nosetests --with-marvin
> --marvin-config=cloud-autodeploy/xen.cfg --load
> test/integration/component/test_resource_limits.py -a tags=advanced
> Test Limit number of guest account specific networks ... ok
> Test VM limit per account ... ok
> Test Public IP limit per account ... ok
> Test Snapshot limit per account ... ok
> Test Volumes limit per account ... ok
> Test Templates limit per account ... ok
> Test Public IP limit per domain ... ok
> Test VM limit per domain ... ok
> Test Snapshot limit per domain ... ok
> Test Volumes limit per domain ... ok
> Test Templates limit per domain ... ok
>
> ----------------------------------------------------------------------
> Ran 11 tests in 3853.822s
>
> OK
>
>
> On Fri, May 31, 2013 at 09:53:43AM -0400, Chip Childers wrote:
>> Hi all,
>>
>> I'm going to keep this vote open until sometime tomorrow. Prasanna wants
>> some time to be sure that the BVT runs all complete successfully with
>> the proposed release artifact, and I'd like to have his test results as
>> part of the vote.
>>
>> If he's +1 (doesn't find any blockers that would cause me to cancel the
>> vote), then I'll close the vote out and start the release process.
>> Hopefully we can wrap up in time to announce on Tuesday (remember that
>> we need at least 24 hours for the dist mirrors to sync after I move the
>> RC to release status).
>>
>> -chip
>>
>> On Tue, May 28, 2013 at 09:47:40AM -0400, Chip Childers wrote:
>>> Hi All,
>>>
>>> I've created a 4.1.0 release, with the following artifacts up for a
>>> vote.
>>>
>>> The changes from round 4 are related to DEB packaging, some
>>> translation strings, and a functional patch to make bridge type
>>> optional during the agent setup (for backward compatibility).
>>>
>>> Git Branch and Commit SH:
>>> https://git-wip-us.apache.org/repos/asf?p=cloudstack.git;a=shortlog;h=refs/heads/4.1
>>> Commit: a5214bee99f6c5582d755c9499f7d99fd7b5b701
>>>
>>> List of changes:
>>> https://git-wip-us.apache.org/repos/asf?p=cloudstack.git;a=blob_plain;f=CHANGES;hb=4.1
>>>
>>> Source release (checksums and signatures are available at the same
>>> location):
>>> https://dist.apache.org/repos/dist/dev/cloudstack/4.1.0/
>>>
>>> PGP release keys (signed using A99A5D58):
>>> https://dist.apache.org/repos/dist/release/cloudstack/KEYS
>>>
>>> Testing instructions are here:
>>> https://cwiki.apache.org/confluence/display/CLOUDSTACK/Release+test+procedure
>>>
>>> Vote will be open for 72 hours.
>>>
>>> For sanity in tallying the vote, can PMC members please be sure to
>>> indicate "(binding)" with their vote?
>>>
>>> [ ] +1 approve
>>> [ ] +0 no opinion
>>> [ ] -1 disapprove (and reason why)
>
> --
> Prasanna.,
>
> ------------------------
> Powered by BigRock.com
>
>
