The branch main has been updated by manu:
URL:
https://cgit.FreeBSD.org/src/commit/?id=cdb0c2a73df624f0facf9903c64663c0bab419a8
commit cdb0c2a73df624f0facf9903c64663c0bab419a8
Author: Emmanuel Vadot <m...@freebsd.org>
AuthorDate: 2023-03-15 09:39:02 +0000
Commit: Emmanuel Vadot <m...@freebsd.org>
CommitDate: 2023-03-17 12:33:57 +0000
arm: Remove IMX5 specific kernel configs
We had GENERIC for a while now so anyone still interested in those boards
should make sure that we can boot on them with it and with upstream DTS
files.
Sponsored by: Beckhoff Automation GmbH & Co. KG
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D39089
---
sys/arm/conf/EFIKA_MX | 145 --------------------------------------------------
sys/arm/conf/IMX53 | 131 ---------------------------------------------
2 files changed, 276 deletions(-)
diff --git a/sys/arm/conf/EFIKA_MX b/sys/arm/conf/EFIKA_MX
deleted file mode 100644
index 941922355057..000000000000
--- a/sys/arm/conf/EFIKA_MX
+++ /dev/null
@@ -1,145 +0,0 @@
-#
-# Kernel configuration for Efika MX Smarttop/Smartbook boards
-#
-# For more information on this file, please read the config(5) manual page,
-# and/or the handbook section on Kernel Configuration Files:
-#
-#
https://docs.freebsd.org/en/books/handbook/kernelconfig/#kernelconfig-config
-#
-# The handbook is also available locally in /usr/share/doc/handbook
-# if you've installed the doc distribution, otherwise always see the
-# FreeBSD World Wide Web server (https://www.FreeBSD.org/) for the
-# latest information.
-#
-# An exhaustive list of options and more detailed explanations of the
-# device lines is also present in the ../../conf/NOTES and NOTES files.
-# If you are in doubt as to the purpose or necessity of a line, check first
-# in NOTES.
-#
-# $FreeBSD$
-
-#NO_UNIVERSE
-
-ident EFIKA_MX
-
-include "std.armv7"
-include "../freescale/imx/std.imx51"
-
-makeoptions WITHOUT_MODULES="ahc"
-
-options SOC_IMX51
-
-options SCHED_4BSD # 4BSD scheduler
-#options MD_ROOT # MD is a potential root device
-#options NFSD # Network Filesystem Server
-options PLATFORM
-options INCLUDE_CONFIG_FILE # Include this file in kernel
-
-# NFS root from boopt/dhcp
-#options BOOTP
-#options BOOTP_NFSROOT
-#options BOOTP_COMPAT
-#options BOOTP_NFSV3
-#options BOOTP_WIRED_TO=ue0
-
-options ROOTDEVNAME=\"ufs:ada0s2a\"
-
-
-# kernel/memory size reduction
-#options MUTEX_NOINLINE
-#options NO_FFS_SNAPSHOT
-#options NO_SWAPPING
-#options NO_SYSCTL_DESCR
-#options RWLOCK_NOINLINE
-
-# pseudo devices
-device clk
-device phy
-device hwreset
-device nvmem
-device regulator
-device syscon
-
-# The `bpf' device enables the Berkeley Packet Filter.
-# Be aware of the administrative consequences of enabling this!
-# Note that 'bpf' is required for DHCP.
-device bpf # Berkeley packet filter
-
-# Pseudo devices.
-device loop # Network loopback
-device ether # Ethernet support
-#device vlan # 802.1Q VLAN support
-#device tuntap # Packet tunnel.
-#device md # Memory "disks"
-#device gif # IPv6 and IPv4 tunneling
-#device firmware # firmware assist module
-
-# Serial (COM) ports
-device uart # Multi-uart driver
-
-device ata
-device atapci # Only for helper functions
-device imxata
-
-device gpio
-device gpioled
-
-device fsliic
-device iic
-device iicbus
-
-# SCSI peripherals
-device scbus # SCSI bus (required for ATA/SCSI)
-device da # Direct Access (disks)
-device cd # CD
-device pass # Passthrough device (direct ATA/SCSI
access)
-
-# USB support
-options USB_HOST_ALIGN=64 # Align usb buffers to cache line size.
-device ehci # OHCI USB interface
-device usb # USB Bus (required)
-device umass # Disks/Mass storage - Requires scbus
and da
-device uhid # "Human Interface Devices"
-device u3g
-
-# USB Ethernet, requires miibus
-device miibus
-device aue # ADMtek USB Ethernet
-device axe # ASIX Electronics USB Ethernet
-device cdce # Generic USB over Ethernet
-device cue # CATC USB Ethernet
-device kue # Kawasaki LSI USB Ethernet
-device rue # RealTek RTL8150 USB Ethernet
-device udav # Davicom DM9601E USB
-
-# USB Wireless
-device rum # Ralink Technology RT2501USB wireless
NICs
-
-# Watchdog timer.
-# WARNING: can't be disabled!!!
-device imxwdt # Watchdog
-
-# Wireless NIC cards
-device wlan # 802.11 support
-device wlan_wep # 802.11 WEP support
-device wlan_ccmp # 802.11 CCMP support
-device wlan_tkip # 802.11 TKIP support
-device wlan_amrr # AMRR transmit rate control algorithm
-
-# HID support
-device hid # Generic HID support
-
-# Flattened Device Tree
-options FDT # Configure using FDT/DTB data
-options FDT_DTB_STATIC
-makeoptions FDT_DTS_FILE=efikamx.dts
-device fdt_pinctrl # FDT pinmux driver
-
-# NOTE: serial console will be disabled if syscons enabled
-# Uncomment following lines for framebuffer/syscons support
-device sc
-device kbdmux
-options SC_DFLT_FONT # compile font in
-makeoptions SC_DFLT_FONT=cp437
-device ukbd # Allow keyboard like HIDs to control
console
-device ums
diff --git a/sys/arm/conf/IMX53 b/sys/arm/conf/IMX53
deleted file mode 100644
index aed467424add..000000000000
--- a/sys/arm/conf/IMX53
+++ /dev/null
@@ -1,131 +0,0 @@
-#
-# Kernel configuration for i.MX53 boards
-#
-# For more information on this file, please read the config(5) manual page,
-# and/or the handbook section on Kernel Configuration Files:
-#
-#
https://docs.freebsd.org/en/books/handbook/kernelconfig/#kernelconfig-config
-#
-# The handbook is also available locally in /usr/share/doc/handbook
-# if you've installed the doc distribution, otherwise always see the
-# FreeBSD World Wide Web server (https://www.FreeBSD.org/) for the
-# latest information.
-#
-# An exhaustive list of options and more detailed explanations of the
-# device lines is also present in the ../../conf/NOTES and NOTES files.
-# If you are in doubt as to the purpose or necessity of a line, check first
-# in NOTES.
-#
-# $FreeBSD$
-
-ident IMX53
-
-include "std.armv7"
-include "../freescale/imx/std.imx53"
-
-options SOC_IMX53
-
-options SCHED_4BSD # 4BSD scheduler
-#options NFSD # Network Filesystem Server
-options PLATFORM
-options INCLUDE_CONFIG_FILE # Include this file in kernel
-
-# kernel/memory size reduction
-#options MUTEX_NOINLINE
-#options NO_FFS_SNAPSHOT
-#options NO_SWAPPING
-#options NO_SYSCTL_DESCR
-#options RWLOCK_NOINLINE
-
-# The `bpf' device enables the Berkeley Packet Filter.
-# Be aware of the administrative consequences of enabling this!
-# Note that 'bpf' is required for DHCP.
-device bpf # Berkeley packet filter
-
-# pseudo devices
-device clk
-device phy
-device hwreset
-device nvmem
-device regulator
-device syscon
-
-# Pseudo devices.
-device loop # Network loopback
-device ether # Ethernet support
-#device vlan # 802.1Q VLAN support
-#device tuntap # Packet tunnel.
-device md # Memory "disks"
-#device gif # IPv6 and IPv4 tunneling
-#device firmware # firmware assist module
-
-# Ethernet
-device ffec # Freescale Fast Ethernet Controller
-device miibus # Standard mii bus
-
-# Serial (COM) ports
-device uart # Multi-uart driver
-
-device ata
-device atapci # Only for helper functions
-device imxata
-
-device gpio
-device gpioled
-
-device fsliic
-device iic
-device iicbus
-
-# SCSI peripherals
-device scbus # SCSI bus (required for ATA/SCSI)
-device da # Direct Access (disks)
-device cd # CD
-device pass # Passthrough device (direct ATA/SCSI
access)
-
-# USB support
-options USB_HOST_ALIGN=64 # Align usb buffers to cache line size.
-device ehci # OHCI USB interface
-device usb # USB Bus (required)
-device umass # Disks/Mass storage - Requires scbus
and da
-device uhid # "Human Interface Devices"
-#device ukbd # Allow keyboard like HIDs to
control console
-device ums
-
-# USB Ethernet, requires miibus
-#device miibus
-#device aue # ADMtek USB Ethernet
-#device axe # ASIX Electronics USB Ethernet
-#device cdce # Generic USB over Ethernet
-#device cue # CATC USB Ethernet
-#device kue # Kawasaki LSI USB Ethernet
-#device rue # RealTek RTL8150 USB Ethernet
-#device udav # Davicom DM9601E USB
-
-# USB Wireless
-#device rum # Ralink Technology RT2501USB
wireless NICs
-
-# Watchdog timer.
-# WARNING: can't be disabled!!!
-device imxwdt # Watchdog
-
-# Wireless NIC cards
-device wlan # 802.11 support
-device wlan_wep # 802.11 WEP support
-device wlan_ccmp # 802.11 CCMP support
-device wlan_tkip # 802.11 TKIP support
-device wlan_amrr # AMRR transmit rate control algorithm
-
-# MMC
-#device sdhci # SD controller
-#device mmc # SD/MMC protocol
-#device mmcsd # SDCard disk device
-
-# HID support
-device hid # Generic HID support
-
-
-# Flattened Device Tree
-options FDT # Configure using FDT/DTB data
-makeoptions MODULES_EXTRA="dtb/imx5 imx"
-device fdt_pinctrl # FDT pinmux driver
