The branch main has been updated by ganbold:
URL:
https://cgit.FreeBSD.org/src/commit/?id=5723e5ac6d7618ebec7e10185312e803898faffc
commit 5723e5ac6d7618ebec7e10185312e803898faffc
Author: Søren Schmidt <s...@freebsd.org>
AuthorDate: 2023-01-06 03:00:18 +0000
Commit: Ganbold Tsagaankhuu <ganb...@freebsd.org>
CommitDate: 2023-01-06 03:04:53 +0000
Add Naneng combo PHY support for RK3568 SoC.
It can be used as pcie-phy, usb3-phy, sata-phy or sgmii-phy.
---
sys/arm64/rockchip/rk3568_combphy.c | 469 ++++++++++++++++++++++++++++++++++++
sys/conf/files.arm64 | 1 +
2 files changed, 470 insertions(+)
diff --git a/sys/arm64/rockchip/rk3568_combphy.c
b/sys/arm64/rockchip/rk3568_combphy.c
new file mode 100644
index 000000000000..e0374c844627
--- /dev/null
+++ b/sys/arm64/rockchip/rk3568_combphy.c
@@ -0,0 +1,469 @@
+/*-
+ * Copyright (c) 2021, 2022 Soren Schmidt <s...@deepcore.dk>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * $Id: rk3568_combphy.c 893 2022-07-26 09:47:22Z sos $
+ */
+
+#include <sys/cdefs.h>
+#include <sys/param.h>
+#include <sys/bus.h>
+#include <sys/kernel.h>
+#include <sys/module.h>
+#include <sys/mutex.h>
+#include <sys/rman.h>
+#include <machine/bus.h>
+
+#include <dev/ofw/openfirm.h>
+#include <dev/ofw/ofw_bus.h>
+#include <dev/ofw/ofw_bus_subr.h>
+
+#include <dev/fdt/simple_mfd.h>
+
+#include <dev/extres/clk/clk.h>
+#include <dev/extres/hwreset/hwreset.h>
+#include <dev/extres/regulator/regulator.h>
+#include <dev/extres/syscon/syscon.h>
+#include <dev/extres/phy/phy.h>
+
+#include <contrib/device-tree/include/dt-bindings/phy/phy.h>
+
+#include "syscon_if.h"
+#include "phydev_if.h"
+#include "phynode_if.h"
+
+
+static struct ofw_compat_data compat_data[] = {
+ {"rockchip,rk3568-naneng-combphy", 1},
+ {NULL, 0}
+};
+
+struct rk3568_combphy_softc {
+ device_t dev;
+ phandle_t node;
+ struct resource *mem;
+ struct phynode *phynode;
+ struct syscon *pipe_grf;
+ struct syscon *pipe_phy_grf;
+ clk_t ref_clk;
+ clk_t apb_clk;
+ clk_t pipe_clk;
+ hwreset_t phy_reset;
+ int mode;
+};
+
+#define PHYREG6 0x14
+#define PHYREG6_PLL_DIV_MASK 0xc0
+#define PHYREG6_PLL_DIV_2 (1 << 6)
+#define PHYREG7 0x18
+#define PHYREG7_TX_RTERM_50OHM (8 << 4)
+#define PHYREG7_RX_RTERM_44OHM (15 << 0)
+#define PHYREG8 0x1c
+#define PHYREG8_SSC_EN 0x10
+#define PHYREG11 0x28
+#define PHYREG11_SU_TRIM_0_7 0xf0
+#define PHYREG12 0x2c
+#define PHYREG12_PLL_LPF_ADJ_VALUE 4
+#define PHYREG15 0x38
+#define PHYREG15_CTLE_EN 0x01
+#define PHYREG15_SSC_CNT_MASK 0xc0
+#define PHYREG15_SSC_CNT_VALUE (1 << 6)
+#define PHYREG16 0x3c
+#define PHYREG16_SSC_CNT_VALUE 0x5f
+#define PHYREG18 0x44
+#define PHYREG18_PLL_LOOP 0x32
+#define PHYREG32 0x7c
+#define PHYREG32_SSC_MASK 0xf0
+#define PHYREG32_SSC_UPWARD (0 << 4)
+#define PHYREG32_SSC_DOWNWARD (1 << 4)
+#define PHYREG32_SSC_OFFSET_500PPM (1 << 6)
+#define PHYREG33 0x80
+#define PHYREG33_PLL_KVCO_MASK 0x1c
+#define PHYREG33_PLL_KVCO_VALUE (2 << 2)
+
+#define PIPE_MASK_ALL (0xffff << 16)
+#define PIPE_PHY_GRF_PIPE_CON0 0x00
+#define PIPE_DATABUSWIDTH_MASK 0x3
+#define PIPE_DATABUSWIDTH_32BIT 0
+#define PIPE_DATABUSWIDTH_16BIT 1
+#define PIPE_PHYMODE_MASK (3 << 2)
+#define PIPE_PHYMODE_PCIE (0 << 2)
+#define PIPE_PHYMODE_USB3 (1 << 2)
+#define PIPE_PHYMODE_SATA (2 << 2)
+#define PIPE_RATE_MASK (3 << 4)
+#define PIPE_RATE_PCIE_2_5GBPS (0 << 4)
+#define PIPE_RATE_PCIE_5GBPS (1 << 4)
+#define PIPE_RATE_USB3_5GBPS (0 << 4)
+#define PIPE_RATE_SATA_1GBPS5 (0 << 4)
+#define PIPE_RATE_SATA_3GBPS (1 << 4)
+#define PIPE_RATE_SATA_6GBPS (2 << 4)
+#define PIPE_MAC_PCLKREQ_N (1 << 8)
+#define PIPE_L1SUB_ENTREQ (1 << 9)
+#define PIPE_RXTERM (1 << 12)
+#define PIPE_PHY_GRF_PIPE_CON1 0x04
+#define PHY_CLK_SEL_MASK (3 << 13)
+#define PHY_CLK_SEL_24M (0 << 13)
+#define PHY_CLK_SEL_25M (1 << 13)
+#define PHY_CLK_SEL_100M (2 << 13)
+#define PIPE_PHY_GRF_PIPE_CON2 0x08
+#define SEL_PIPE_TXCOMPLIANCE_I (1 << 15)
+#define SEL_PIPE_TXELECIDLE (1 << 12)
+#define SEL_PIPE_RXTERM (1 << 8)
+#define SEL_PIPE_BYPASS_CODEC (1 << 7)
+#define SEL_PIPE_PIPE_EBUF (1 << 6)
+#define SEL_PIPE_PIPE_PHYMODE (1 << 1)
+#define SEL_PIPE_DATABUSWIDTH (1 << 0)
+#define PIPE_PHY_GRF_PIPE_CON3 0x0c
+#define PIPE_SEL_MASK (3 << 13)
+#define PIPE_SEL_PCIE (0 << 13)
+#define PIPE_SEL_USB3 (1 << 13)
+#define PIPE_SEL_SATA (2 << 13)
+#define PIPE_CLK_REF_SRC_I_MASK (3 << 8)
+#define PIPE_CLK_REF_SRC_I_PLL_CKREF_INNER (2 << 8)
+#define PIPE_RXELECIDLE (1 << 10)
+#define PIPE_FROM_PCIE_IO (1 << 11)
+
+#define PIPE_GRF_PIPE_CON0 0x00
+#define SATA2_PHY_SPDMODE_1GBPS5 (0 << 12)
+#define SATA2_PHY_SPDMODE_3GBPS (1 << 12)
+#define SATA2_PHY_SPDMODE_6GBPS (2 << 12)
+#define SATA1_PHY_SPDMODE_1GBPS5 (0 << 8)
+#define SATA1_PHY_SPDMODE_3GBPS (1 << 8)
+#define SATA1_PHY_SPDMODE_6GBPS (2 << 8)
+#define SATA0_PHY_SPDMODE_1GBPS5 (0 << 4)
+#define SATA0_PHY_SPDMODE_3GBPS (1 << 4)
+#define SATA0_PHY_SPDMODE_6GBPS (2 << 4)
+
+#define PIPE_GRF_SATA_CON0 0x10
+#define PIPE_GRF_SATA_CON1 0x14
+#define PIPE_GRF_SATA_CON2 0x18
+#define PIPE_GRF_XPCS_CON0 0x40
+
+
+/* PHY class and methods */
+static int
+rk3568_combphy_enable(struct phynode *phynode, bool enable)
+{
+ device_t dev = phynode_get_device(phynode);
+ struct rk3568_combphy_softc *sc = device_get_softc(dev);
+ uint64_t rate;
+
+ if (enable == false)
+ return (0);
+
+ switch (sc->mode) {
+ case PHY_TYPE_SATA:
+ device_printf(dev, "configuring for SATA");
+
+ /* tx_rterm 50 ohm & rx_rterm 44 ohm */
+ bus_write_4(sc->mem, PHYREG7,
+ PHYREG7_TX_RTERM_50OHM | PHYREG7_RX_RTERM_44OHM);
+
+ /* Adaptive CTLE */
+ bus_write_4(sc->mem, PHYREG15,
+ bus_read_4(sc->mem, PHYREG15) | PHYREG15_CTLE_EN);
+
+ /* config grf_pipe for PCIe */
+ SYSCON_WRITE_4(sc->pipe_phy_grf, PIPE_PHY_GRF_PIPE_CON3,
+ PIPE_MASK_ALL | PIPE_SEL_SATA | PIPE_RXELECIDLE | 0x7);
+
+ SYSCON_WRITE_4(sc->pipe_phy_grf, PIPE_PHY_GRF_PIPE_CON2,
+ PIPE_MASK_ALL | SEL_PIPE_TXCOMPLIANCE_I |
+ SEL_PIPE_DATABUSWIDTH | 0xc3);
+
+ SYSCON_WRITE_4(sc->pipe_phy_grf, PIPE_PHY_GRF_PIPE_CON0,
+ PIPE_MASK_ALL | PIPE_RXTERM | PIPE_DATABUSWIDTH_16BIT |
+ PIPE_RATE_SATA_3GBPS | PIPE_PHYMODE_SATA);
+
+ SYSCON_WRITE_4(sc->pipe_grf, PIPE_GRF_PIPE_CON0,
+ PIPE_MASK_ALL | SATA0_PHY_SPDMODE_6GBPS |
+ SATA1_PHY_SPDMODE_6GBPS | SATA2_PHY_SPDMODE_6GBPS);
+ break;
+
+ case PHY_TYPE_PCIE:
+ device_printf(dev, "configuring for PCIe");
+
+ /* Set SSC downward spread spectrum */
+ bus_write_4(sc->mem, PHYREG32,
+ (bus_read_4(sc->mem, PHYREG32) & PHYREG32_SSC_MASK) |
+ PHYREG32_SSC_DOWNWARD);
+
+ /* config grf_pipe for PCIe */
+ SYSCON_WRITE_4(sc->pipe_phy_grf, PIPE_PHY_GRF_PIPE_CON3,
+ PIPE_MASK_ALL | PIPE_SEL_PCIE |
+ PIPE_CLK_REF_SRC_I_PLL_CKREF_INNER);
+ SYSCON_WRITE_4(sc->pipe_phy_grf, PIPE_PHY_GRF_PIPE_CON2,
+ PIPE_MASK_ALL | SEL_PIPE_RXTERM | SEL_PIPE_DATABUSWIDTH);
+ SYSCON_WRITE_4(sc->pipe_phy_grf, PIPE_PHY_GRF_PIPE_CON0,
+ PIPE_MASK_ALL | PIPE_RXTERM | PIPE_DATABUSWIDTH_32BIT |
+ PIPE_RATE_PCIE_2_5GBPS | PIPE_PHYMODE_PCIE);
+ break;
+
+ case PHY_TYPE_USB3:
+ device_printf(dev, "configuring for USB3");
+
+ /* Set SSC downward spread spectrum */
+ bus_write_4(sc->mem, PHYREG32,
+ (bus_read_4(sc->mem, PHYREG32) & PHYREG32_SSC_MASK) |
+ PHYREG32_SSC_DOWNWARD);
+
+ /* Adaptive CTLE */
+ bus_write_4(sc->mem, PHYREG15,
+ bus_read_4(sc->mem, PHYREG15) | PHYREG15_CTLE_EN);
+
+ /* Set PLL KVCO fine tuning signals */
+ bus_write_4(sc->mem, PHYREG33,
+ (bus_read_4(sc->mem, PHYREG33) & PHYREG33_PLL_KVCO_MASK) |
+ PHYREG33_PLL_KVCO_VALUE);
+
+ /* Enable controlling random jitter. */
+ bus_write_4(sc->mem, PHYREG12, PHYREG12_PLL_LPF_ADJ_VALUE);
+
+ /* Set PLL input clock divider 1/2 */
+ bus_write_4(sc->mem, PHYREG6,
+ (bus_read_4(sc->mem, PHYREG6) & PHYREG6_PLL_DIV_MASK) |
+ PHYREG6_PLL_DIV_2);
+
+ /* Set PLL loop divider */
+ bus_write_4(sc->mem, PHYREG18, PHYREG18_PLL_LOOP);
+
+ /* Set PLL LPF R1 to su_trim[0:7] */
+ bus_write_4(sc->mem, PHYREG11, PHYREG11_SU_TRIM_0_7);
+
+ /* config grf_pipe for USB3 */
+ SYSCON_WRITE_4(sc->pipe_phy_grf, PIPE_PHY_GRF_PIPE_CON3,
+ PIPE_MASK_ALL | PIPE_SEL_USB3);
+ SYSCON_WRITE_4(sc->pipe_phy_grf, PIPE_PHY_GRF_PIPE_CON2,
+ PIPE_MASK_ALL);
+ SYSCON_WRITE_4(sc->pipe_phy_grf, PIPE_PHY_GRF_PIPE_CON0,
+ PIPE_MASK_ALL | PIPE_DATABUSWIDTH_16BIT |
+ PIPE_PHYMODE_USB3 | PIPE_RATE_USB3_5GBPS);
+ break;
+
+ default:
+ printf("Unsupported mode=%d\n", sc->mode);
+ return (-1);
+ }
+
+ clk_get_freq(sc->ref_clk, &rate);
+ printf(" ref_clk=%lu\n", rate);
+
+ switch (rate) {
+ case 24000000:
+ SYSCON_WRITE_4(sc->pipe_phy_grf, PIPE_PHY_GRF_PIPE_CON1,
+ (PHY_CLK_SEL_MASK << 16) | PHY_CLK_SEL_24M);
+
+ if (sc->mode == PHY_TYPE_USB3 || sc->mode == PHY_TYPE_SATA) {
+ /* Adaptive CTLE */
+ bus_write_4(sc->mem, PHYREG15,
+ (bus_read_4(sc->mem, PHYREG15) &
+ PHYREG15_SSC_CNT_MASK) | PHYREG15_SSC_CNT_VALUE);
+
+ /* SSC control period */
+ bus_write_4(sc->mem, PHYREG16, PHYREG16_SSC_CNT_VALUE);
+ }
+ break;
+
+ case 25000000:
+ SYSCON_WRITE_4(sc->pipe_phy_grf, PIPE_PHY_GRF_PIPE_CON1,
+ (PHY_CLK_SEL_MASK << 16) | PHY_CLK_SEL_25M);
+ break;
+
+ case 100000000:
+ SYSCON_WRITE_4(sc->pipe_phy_grf, PIPE_PHY_GRF_PIPE_CON1,
+ (PHY_CLK_SEL_MASK << 16) | PHY_CLK_SEL_100M);
+
+ if (sc->mode == PHY_TYPE_PCIE) {
+ /* Set PLL KVCO fine tuning signals */
+ bus_write_4(sc->mem, PHYREG33,
+ (bus_read_4(sc->mem, PHYREG33) &
+ PHYREG33_PLL_KVCO_MASK) | PHYREG33_PLL_KVCO_VALUE);
+
+ /* Enable controlling random jitter. */
+ bus_write_4(sc->mem, PHYREG12,
+ PHYREG12_PLL_LPF_ADJ_VALUE);
+
+ /* Set PLL input clock divider 1/2 */
+ bus_write_4(sc->mem, PHYREG6,
+ (bus_read_4(sc->mem, PHYREG6) &
+ PHYREG6_PLL_DIV_MASK) | PHYREG6_PLL_DIV_2);
+
+ /* Set PLL loop divider */
+ bus_write_4(sc->mem, PHYREG18, PHYREG18_PLL_LOOP);
+
+ /* Set PLL LPF R1 to su_trim[0:7] */
+ bus_write_4(sc->mem, PHYREG11, PHYREG11_SU_TRIM_0_7);
+ }
+ if (sc->mode == PHY_TYPE_SATA) {
+ /* Set SSC downward spread spectrum */
+ bus_write_4(sc->mem, PHYREG32,
+ (bus_read_4(sc->mem, PHYREG32) & ~0x000000f0) |
+ PHYREG32_SSC_DOWNWARD | PHYREG32_SSC_OFFSET_500PPM);
+ }
+ break;
+
+ default:
+ device_printf(dev, "unknown ref rate=%lu\n", rate);
+ break;
+ }
+
+ if (OF_hasprop(sc->node, "rockchip,ext-refclk")) {
+ device_printf(dev, "UNSUPPORTED rockchip,ext-refclk\n");
+ }
+ if (OF_hasprop(sc->node, "rockchip,enable-ssc")) {
+ device_printf(dev, "setting rockchip,enable-ssc\n");
+ bus_write_4(sc->mem, PHYREG8,
+ bus_read_4(sc->mem, PHYREG8) | PHYREG8_SSC_EN);
+ }
+
+ if (hwreset_deassert(sc->phy_reset))
+ device_printf(dev, "phy_reset failed to clear\n");
+
+ return (0);
+}
+
+static phynode_method_t rk3568_combphy_phynode_methods[] = {
+ PHYNODEMETHOD(phynode_enable, rk3568_combphy_enable),
+
+ PHYNODEMETHOD_END
+};
+DEFINE_CLASS_1(rk3568_combphy_phynode, rk3568_combphy_phynode_class,
+ rk3568_combphy_phynode_methods, 0, phynode_class);
+
+
+/* Device class and methods */
+static int
+rk3568_combphy_probe(device_t dev)
+{
+
+ if (!ofw_bus_status_okay(dev))
+ return (ENXIO);
+ if (ofw_bus_search_compatible(dev, compat_data)->ocd_data == 0)
+ return (ENXIO);
+ device_set_desc(dev, "RockChip combo PHY");
+ return (BUS_PROBE_DEFAULT);
+}
+
+static int
+rk3568_combphy_attach(device_t dev)
+{
+ struct rk3568_combphy_softc *sc = device_get_softc(dev);
+ struct phynode_init_def phy_init;
+ struct phynode *phynode;
+ int rid = 0;
+
+ sc->dev = dev;
+ sc->node = ofw_bus_get_node(dev);
+
+ /* Get memory resource */
+ if (!(sc->mem = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
+ &rid, RF_ACTIVE))) {
+ device_printf(dev, "Cannot allocate memory resources\n");
+ return (ENXIO);
+ }
+
+ /* Get syncons handles */
+ if (OF_hasprop(sc->node, "rockchip,pipe-grf") &&
+ syscon_get_by_ofw_property(dev, sc->node, "rockchip,pipe-grf",
+ &sc->pipe_grf))
+ return (ENXIO);
+ if (OF_hasprop(sc->node, "rockchip,pipe-phy-grf") &&
+ syscon_get_by_ofw_property(dev, sc->node, "rockchip,pipe-phy-grf",
+ &sc->pipe_phy_grf))
+ return (ENXIO);
+
+ /* Get & enable clocks */
+ if (clk_get_by_ofw_name(dev, 0, "ref", &sc->ref_clk)) {
+ device_printf(dev, "getting ref failed\n");
+ return (ENXIO);
+ }
+ if (clk_enable(sc->ref_clk))
+ device_printf(dev, "enable ref failed\n");
+ if (clk_get_by_ofw_name(dev, 0, "apb", &sc->apb_clk)) {
+ device_printf(dev, "getting apb failed\n");
+ return (ENXIO);
+ }
+ if (clk_enable(sc->apb_clk))
+ device_printf(dev, "enable apb failed\n");
+ if (clk_get_by_ofw_name(dev, 0, "pipe", &sc->pipe_clk)) {
+ device_printf(dev, "getting pipe failed\n");
+ return (ENXIO);
+ }
+ if (clk_enable(sc->pipe_clk))
+ device_printf(dev, "enable pipe failed\n");
+
+ /* get & assert reset */
+ if (hwreset_get_by_ofw_idx(dev, sc->node, 0, &sc->phy_reset)) {
+ device_printf(dev, "Cannot get reset\n");
+ return (ENXIO);
+ }
+ hwreset_assert(sc->phy_reset);
+
+ bzero(&phy_init, sizeof(phy_init));
+ phy_init.id = 0;
+ phy_init.ofw_node = sc->node;
+ if (!(phynode = phynode_create(dev, &rk3568_combphy_phynode_class,
+ &phy_init))) {
+ device_printf(dev, "failed to create combphy PHY\n");
+ return (ENXIO);
+ }
+ if (!phynode_register(phynode)) {
+ device_printf(dev, "failed to register combphy PHY\n");
+ return (ENXIO);
+ }
+ sc->phynode = phynode;
+ sc->mode = 0;
+
+ return (0);
+}
+
+static int
+rk3568_combphy_map(device_t dev, phandle_t xref, int ncells, pcell_t *cells,
+ intptr_t *id)
+{
+ struct rk3568_combphy_softc *sc = device_get_softc(dev);
+
+ if (phydev_default_ofw_map(dev, xref, ncells, cells, id))
+ return (ERANGE);
+
+ /* Store the phy mode that is handed to us in id */
+ sc->mode = *id;
+
+ /* Set our id to 0 so the std phy_get_*() works as usual */
+ *id = 0;
+
+ return (0);
+}
+
+static device_method_t rk3568_combphy_methods[] = {
+ DEVMETHOD(device_probe, rk3568_combphy_probe),
+ DEVMETHOD(device_attach, rk3568_combphy_attach),
+ DEVMETHOD(phydev_map, rk3568_combphy_map),
+
+ DEVMETHOD_END
+};
+
+DEFINE_CLASS_1(rk3568_combphy, rk3568_combphy_driver, rk3568_combphy_methods,
+ sizeof(struct simple_mfd_softc), simple_mfd_driver);
+EARLY_DRIVER_MODULE(rk3568_combphy, simplebus, rk3568_combphy_driver,
+ 0, 0, BUS_PASS_RESOURCE + BUS_PASS_ORDER_LATE);
diff --git a/sys/conf/files.arm64 b/sys/conf/files.arm64
index df39a408867d..6c42812fcc42 100644
--- a/sys/conf/files.arm64
+++ b/sys/conf/files.arm64
@@ -622,6 +622,7 @@ arm64/qualcomm/qcom_gcc.c optional
qcom_gcc fdt
# RockChip Drivers
arm64/rockchip/rk3328_codec.c optional fdt rk3328codec
soc_rockchip_rk3328
arm64/rockchip/rk3399_emmcphy.c optional fdt rk_emmcphy
soc_rockchip_rk3399
+arm64/rockchip/rk3568_combphy.c optional fdt rk_combphy
soc_rockchip_rk3568
arm64/rockchip/rk3568_pcie.c optional fdt pci
soc_rockchip_rk3568
arm64/rockchip/rk3568_pciephy.c optional fdt pci
soc_rockchip_rk3568
arm64/rockchip/rk_dwc3.c optional fdt rk_dwc3
soc_rockchip_rk3399 | fdt rk_dwc3 soc_rockchip_rk3568
