The branch main has been updated by gbe (doc committer):
URL:
https://cgit.FreeBSD.org/src/commit/?id=74c6ca6fbf61a7879a91c5d0f68786c22ac8f0db
commit 74c6ca6fbf61a7879a91c5d0f68786c22ac8f0db
Author: Gordon Bergling <g...@freebsd.org>
AuthorDate: 2022-04-09 08:34:48 +0000
Commit: Gordon Bergling <g...@freebsd.org>
CommitDate: 2022-04-09 08:34:48 +0000
usb: Remove some double words in source code comments
- s/for for/for/
MFC after: 3 days
---
sys/dev/usb/serial/umcs.h | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/sys/dev/usb/serial/umcs.h b/sys/dev/usb/serial/umcs.h
index 288988c2d9b6..fe6fb45b90ea 100644
--- a/sys/dev/usb/serial/umcs.h
+++ b/sys/dev/usb/serial/umcs.h
@@ -45,7 +45,7 @@
* All these registers are documented only in full datasheet,
* which can be requested from MosChip tech support.
*/
-#define MCS7840_DEV_REG_SP1 0x00 /* Options for for UART
1, R/W */
+#define MCS7840_DEV_REG_SP1 0x00 /* Options for UART 1,
R/W */
#define MCS7840_DEV_REG_CONTROL1 0x01 /* Control bits for
UART 1,
* R/W */
#define MCS7840_DEV_REG_PINPONGHIGH 0x02 /* High bits of
ping-pong
@@ -56,13 +56,13 @@
#define MCS7840_DEV_REG_GPIO 0x07 /* GPIO_0 and GPIO_1
bits,
* undocumented, see notes
* below R/W */
-#define MCS7840_DEV_REG_SP2 0x08 /* Options for for UART
2, R/W */
+#define MCS7840_DEV_REG_SP2 0x08 /* Options for UART 2,
R/W */
#define MCS7840_DEV_REG_CONTROL2 0x09 /* Control bits for
UART 2,
* R/W */
-#define MCS7840_DEV_REG_SP3 0x0a /* Options for for UART
3, R/W */
+#define MCS7840_DEV_REG_SP3 0x0a /* Options for UART 3,
R/W */
#define MCS7840_DEV_REG_CONTROL3 0x0b /* Control bits for
UART 3,
* R/W */
-#define MCS7840_DEV_REG_SP4 0x0c /* Options for for UART
4, R/W */
+#define MCS7840_DEV_REG_SP4 0x0c /* Options for UART 4,
R/W */
#define MCS7840_DEV_REG_CONTROL4 0x0d /* Control bits for
UART 4,
* R/W */
#define MCS7840_DEV_REG_PLL_DIV_M 0x0e /* Pre-diviedr for PLL,
R/W */
