On 6 Jan 2023, at 03:06, Ganbold Tsagaankhuu <ganb...@freebsd.org> wrote:
>
> The branch main has been updated by ganbold:
>
> URL:
> https://cgit.FreeBSD.org/src/commit/?id=5723e5ac6d7618ebec7e10185312e803898faffc
>
> commit 5723e5ac6d7618ebec7e10185312e803898faffc
> Author: Søren Schmidt <s...@freebsd.org>
> AuthorDate: 2023-01-06 03:00:18 +0000
> Commit: Ganbold Tsagaankhuu <ganb...@freebsd.org>
> CommitDate: 2023-01-06 03:04:53 +0000
>
> Add Naneng combo PHY support for RK3568 SoC.
>
> It can be used as pcie-phy, usb3-phy, sata-phy or sgmii-phy.
> ---
> sys/arm64/rockchip/rk3568_combphy.c | 469 ++++++++++++++++++++++++++++++++++++
> sys/conf/files.arm64 | 1 +
> 2 files changed, 470 insertions(+)
>
> diff --git a/sys/arm64/rockchip/rk3568_combphy.c
> b/sys/arm64/rockchip/rk3568_combphy.c
> new file mode 100644
> index 000000000000..e0374c844627
> --- /dev/null
> +++ b/sys/arm64/rockchip/rk3568_combphy.c
> @@ -0,0 +1,469 @@
> +/*-
> + * Copyright (c) 2021, 2022 Soren Schmidt <s...@deepcore.dk>
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions
> + * are met:
> + * 1. Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * 2. Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in the
> + * documentation and/or other materials provided with the distribution.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
> + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
> + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
> + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
> + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
> + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
> + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
> + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
> + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
> + * SUCH DAMAGE.
> + *
> + * $Id: rk3568_combphy.c 893 2022-07-26 09:47:22Z sos $
Please stop adding these and delete the ones added in prior commits.
Jess
> + */
> +
> +#include <sys/cdefs.h>
> +#include <sys/param.h>
> +#include <sys/bus.h>
> +#include <sys/kernel.h>
> +#include <sys/module.h>
> +#include <sys/mutex.h>
> +#include <sys/rman.h>
> +#include <machine/bus.h>
> +
> +#include <dev/ofw/openfirm.h>
> +#include <dev/ofw/ofw_bus.h>
> +#include <dev/ofw/ofw_bus_subr.h>
> +
> +#include <dev/fdt/simple_mfd.h>
> +
> +#include <dev/extres/clk/clk.h>
> +#include <dev/extres/hwreset/hwreset.h>
> +#include <dev/extres/regulator/regulator.h>
> +#include <dev/extres/syscon/syscon.h>
> +#include <dev/extres/phy/phy.h>
> +
> +#include <contrib/device-tree/include/dt-bindings/phy/phy.h>
> +
> +#include "syscon_if.h"
> +#include "phydev_if.h"
> +#include "phynode_if.h"
> +
> +
> +static struct ofw_compat_data compat_data[] = {
> + {"rockchip,rk3568-naneng-combphy", 1},
> + {NULL, 0}
> +};
> +
> +struct rk3568_combphy_softc {
> + device_t dev;
> + phandle_t node;
> + struct resource *mem;
> + struct phynode *phynode;
> + struct syscon *pipe_grf;
> + struct syscon *pipe_phy_grf;
> + clk_t ref_clk;
> + clk_t apb_clk;
> + clk_t pipe_clk;
> + hwreset_t phy_reset;
> + int mode;
> +};
> +
> +#define PHYREG6 0x14
> +#define PHYREG6_PLL_DIV_MASK 0xc0
> +#define PHYREG6_PLL_DIV_2 (1 << 6)
> +#define PHYREG7 0x18
> +#define PHYREG7_TX_RTERM_50OHM (8 << 4)
> +#define PHYREG7_RX_RTERM_44OHM (15 << 0)
> +#define PHYREG8 0x1c
> +#define PHYREG8_SSC_EN 0x10
> +#define PHYREG11 0x28
> +#define PHYREG11_SU_TRIM_0_7 0xf0
> +#define PHYREG12 0x2c
> +#define PHYREG12_PLL_LPF_ADJ_VALUE 4
> +#define PHYREG15 0x38
> +#define PHYREG15_CTLE_EN 0x01
> +#define PHYREG15_SSC_CNT_MASK 0xc0
> +#define PHYREG15_SSC_CNT_VALUE (1 << 6)
> +#define PHYREG16 0x3c
> +#define PHYREG16_SSC_CNT_VALUE 0x5f
> +#define PHYREG18 0x44
> +#define PHYREG18_PLL_LOOP 0x32
> +#define PHYREG32 0x7c
> +#define PHYREG32_SSC_MASK 0xf0
> +#define PHYREG32_SSC_UPWARD (0 << 4)
> +#define PHYREG32_SSC_DOWNWARD (1 << 4)
> +#define PHYREG32_SSC_OFFSET_500PPM (1 << 6)
> +#define PHYREG33 0x80
> +#define PHYREG33_PLL_KVCO_MASK 0x1c
> +#define PHYREG33_PLL_KVCO_VALUE (2 << 2)
> +
> +#define PIPE_MASK_ALL (0xffff << 16)
> +#define PIPE_PHY_GRF_PIPE_CON0 0x00
> +#define PIPE_DATABUSWIDTH_MASK 0x3
> +#define PIPE_DATABUSWIDTH_32BIT 0
> +#define PIPE_DATABUSWIDTH_16BIT 1
> +#define PIPE_PHYMODE_MASK (3 << 2)
> +#define PIPE_PHYMODE_PCIE (0 << 2)
> +#define PIPE_PHYMODE_USB3 (1 << 2)
> +#define PIPE_PHYMODE_SATA (2 << 2)
> +#define PIPE_RATE_MASK (3 << 4)
> +#define PIPE_RATE_PCIE_2_5GBPS (0 << 4)
> +#define PIPE_RATE_PCIE_5GBPS (1 << 4)
> +#define PIPE_RATE_USB3_5GBPS (0 << 4)
> +#define PIPE_RATE_SATA_1GBPS5 (0 << 4)
> +#define PIPE_RATE_SATA_3GBPS (1 << 4)
> +#define PIPE_RATE_SATA_6GBPS (2 << 4)
> +#define PIPE_MAC_PCLKREQ_N (1 << 8)
> +#define PIPE_L1SUB_ENTREQ (1 << 9)
> +#define PIPE_RXTERM (1 << 12)
> +#define PIPE_PHY_GRF_PIPE_CON1 0x04
> +#define PHY_CLK_SEL_MASK (3 << 13)
> +#define PHY_CLK_SEL_24M (0 << 13)
> +#define PHY_CLK_SEL_25M (1 << 13)
> +#define PHY_CLK_SEL_100M (2 << 13)
> +#define PIPE_PHY_GRF_PIPE_CON2 0x08
> +#define SEL_PIPE_TXCOMPLIANCE_I (1 << 15)
> +#define SEL_PIPE_TXELECIDLE (1 << 12)
> +#define SEL_PIPE_RXTERM (1 << 8)
> +#define SEL_PIPE_BYPASS_CODEC (1 << 7)
> +#define SEL_PIPE_PIPE_EBUF (1 << 6)
> +#define SEL_PIPE_PIPE_PHYMODE (1 << 1)
> +#define SEL_PIPE_DATABUSWIDTH (1 << 0)
> +#define PIPE_PHY_GRF_PIPE_CON3 0x0c
> +#define PIPE_SEL_MASK (3 << 13)
> +#define PIPE_SEL_PCIE (0 << 13)
> +#define PIPE_SEL_USB3 (1 << 13)
> +#define PIPE_SEL_SATA (2 << 13)
> +#define PIPE_CLK_REF_SRC_I_MASK (3 << 8)
> +#define PIPE_CLK_REF_SRC_I_PLL_CKREF_INNER (2 << 8)
> +#define PIPE_RXELECIDLE (1 << 10)
> +#define PIPE_FROM_PCIE_IO (1 << 11)
> +
> +#define PIPE_GRF_PIPE_CON0 0x00
> +#define SATA2_PHY_SPDMODE_1GBPS5 (0 << 12)
> +#define SATA2_PHY_SPDMODE_3GBPS (1 << 12)
> +#define SATA2_PHY_SPDMODE_6GBPS (2 << 12)
> +#define SATA1_PHY_SPDMODE_1GBPS5 (0 << 8)
> +#define SATA1_PHY_SPDMODE_3GBPS (1 << 8)
> +#define SATA1_PHY_SPDMODE_6GBPS (2 << 8)
> +#define SATA0_PHY_SPDMODE_1GBPS5 (0 << 4)
> +#define SATA0_PHY_SPDMODE_3GBPS (1 << 4)
> +#define SATA0_PHY_SPDMODE_6GBPS (2 << 4)
> +
> +#define PIPE_GRF_SATA_CON0 0x10
> +#define PIPE_GRF_SATA_CON1 0x14
> +#define PIPE_GRF_SATA_CON2 0x18
> +#define PIPE_GRF_XPCS_CON0 0x40
> +
> +
> +/* PHY class and methods */
> +static int
> +rk3568_combphy_enable(struct phynode *phynode, bool enable)
> +{
> + device_t dev = phynode_get_device(phynode);
> + struct rk3568_combphy_softc *sc = device_get_softc(dev);
> + uint64_t rate;
> +
> + if (enable == false)
> + return (0);
> +
> + switch (sc->mode) {
> + case PHY_TYPE_SATA:
> + device_printf(dev, "configuring for SATA");
> +
> + /* tx_rterm 50 ohm & rx_rterm 44 ohm */
> + bus_write_4(sc->mem, PHYREG7,
> + PHYREG7_TX_RTERM_50OHM | PHYREG7_RX_RTERM_44OHM);
> +
> + /* Adaptive CTLE */
> + bus_write_4(sc->mem, PHYREG15,
> + bus_read_4(sc->mem, PHYREG15) | PHYREG15_CTLE_EN);
> +
> + /* config grf_pipe for PCIe */
> + SYSCON_WRITE_4(sc->pipe_phy_grf, PIPE_PHY_GRF_PIPE_CON3,
> + PIPE_MASK_ALL | PIPE_SEL_SATA | PIPE_RXELECIDLE | 0x7);
> +
> + SYSCON_WRITE_4(sc->pipe_phy_grf, PIPE_PHY_GRF_PIPE_CON2,
> + PIPE_MASK_ALL | SEL_PIPE_TXCOMPLIANCE_I |
> + SEL_PIPE_DATABUSWIDTH | 0xc3);
> +
> + SYSCON_WRITE_4(sc->pipe_phy_grf, PIPE_PHY_GRF_PIPE_CON0,
> + PIPE_MASK_ALL | PIPE_RXTERM | PIPE_DATABUSWIDTH_16BIT |
> + PIPE_RATE_SATA_3GBPS | PIPE_PHYMODE_SATA);
> +
> + SYSCON_WRITE_4(sc->pipe_grf, PIPE_GRF_PIPE_CON0,
> + PIPE_MASK_ALL | SATA0_PHY_SPDMODE_6GBPS |
> + SATA1_PHY_SPDMODE_6GBPS | SATA2_PHY_SPDMODE_6GBPS);
> + break;
> +
> + case PHY_TYPE_PCIE:
> + device_printf(dev, "configuring for PCIe");
> +
> + /* Set SSC downward spread spectrum */
> + bus_write_4(sc->mem, PHYREG32,
> + (bus_read_4(sc->mem, PHYREG32) & PHYREG32_SSC_MASK) |
> + PHYREG32_SSC_DOWNWARD);
> +
> + /* config grf_pipe for PCIe */
> + SYSCON_WRITE_4(sc->pipe_phy_grf, PIPE_PHY_GRF_PIPE_CON3,
> + PIPE_MASK_ALL | PIPE_SEL_PCIE |
> + PIPE_CLK_REF_SRC_I_PLL_CKREF_INNER);
> + SYSCON_WRITE_4(sc->pipe_phy_grf, PIPE_PHY_GRF_PIPE_CON2,
> + PIPE_MASK_ALL | SEL_PIPE_RXTERM | SEL_PIPE_DATABUSWIDTH);
> + SYSCON_WRITE_4(sc->pipe_phy_grf, PIPE_PHY_GRF_PIPE_CON0,
> + PIPE_MASK_ALL | PIPE_RXTERM | PIPE_DATABUSWIDTH_32BIT |
> + PIPE_RATE_PCIE_2_5GBPS | PIPE_PHYMODE_PCIE);
> + break;
> +
> + case PHY_TYPE_USB3:
> + device_printf(dev, "configuring for USB3");
> +
> + /* Set SSC downward spread spectrum */
> + bus_write_4(sc->mem, PHYREG32,
> + (bus_read_4(sc->mem, PHYREG32) & PHYREG32_SSC_MASK) |
> + PHYREG32_SSC_DOWNWARD);
> +
> + /* Adaptive CTLE */
> + bus_write_4(sc->mem, PHYREG15,
> + bus_read_4(sc->mem, PHYREG15) | PHYREG15_CTLE_EN);
> +
> + /* Set PLL KVCO fine tuning signals */
> + bus_write_4(sc->mem, PHYREG33,
> + (bus_read_4(sc->mem, PHYREG33) & PHYREG33_PLL_KVCO_MASK) |
> + PHYREG33_PLL_KVCO_VALUE);
> +
> + /* Enable controlling random jitter. */
> + bus_write_4(sc->mem, PHYREG12, PHYREG12_PLL_LPF_ADJ_VALUE);
> +
> + /* Set PLL input clock divider 1/2 */
> + bus_write_4(sc->mem, PHYREG6,
> + (bus_read_4(sc->mem, PHYREG6) & PHYREG6_PLL_DIV_MASK) |
> + PHYREG6_PLL_DIV_2);
> +
> + /* Set PLL loop divider */
> + bus_write_4(sc->mem, PHYREG18, PHYREG18_PLL_LOOP);
> +
> + /* Set PLL LPF R1 to su_trim[0:7] */
> + bus_write_4(sc->mem, PHYREG11, PHYREG11_SU_TRIM_0_7);
> +
> + /* config grf_pipe for USB3 */
> + SYSCON_WRITE_4(sc->pipe_phy_grf, PIPE_PHY_GRF_PIPE_CON3,
> + PIPE_MASK_ALL | PIPE_SEL_USB3);
> + SYSCON_WRITE_4(sc->pipe_phy_grf, PIPE_PHY_GRF_PIPE_CON2,
> + PIPE_MASK_ALL);
> + SYSCON_WRITE_4(sc->pipe_phy_grf, PIPE_PHY_GRF_PIPE_CON0,
> + PIPE_MASK_ALL | PIPE_DATABUSWIDTH_16BIT |
> + PIPE_PHYMODE_USB3 | PIPE_RATE_USB3_5GBPS);
> + break;
> +
> + default:
> + printf("Unsupported mode=%d\n", sc->mode);
> + return (-1);
> + }
> +
> + clk_get_freq(sc->ref_clk, &rate);
> + printf(" ref_clk=%lu\n", rate);
> +
> + switch (rate) {
> + case 24000000:
> + SYSCON_WRITE_4(sc->pipe_phy_grf, PIPE_PHY_GRF_PIPE_CON1,
> + (PHY_CLK_SEL_MASK << 16) | PHY_CLK_SEL_24M);
> +
> + if (sc->mode == PHY_TYPE_USB3 || sc->mode == PHY_TYPE_SATA) {
> + /* Adaptive CTLE */
> + bus_write_4(sc->mem, PHYREG15,
> + (bus_read_4(sc->mem, PHYREG15) &
> + PHYREG15_SSC_CNT_MASK) | PHYREG15_SSC_CNT_VALUE);
> +
> + /* SSC control period */
> + bus_write_4(sc->mem, PHYREG16, PHYREG16_SSC_CNT_VALUE);
> + }
> + break;
> +
> + case 25000000:
> + SYSCON_WRITE_4(sc->pipe_phy_grf, PIPE_PHY_GRF_PIPE_CON1,
> + (PHY_CLK_SEL_MASK << 16) | PHY_CLK_SEL_25M);
> + break;
> +
> + case 100000000:
> + SYSCON_WRITE_4(sc->pipe_phy_grf, PIPE_PHY_GRF_PIPE_CON1,
> + (PHY_CLK_SEL_MASK << 16) | PHY_CLK_SEL_100M);
> +
> + if (sc->mode == PHY_TYPE_PCIE) {
> + /* Set PLL KVCO fine tuning signals */
> + bus_write_4(sc->mem, PHYREG33,
> + (bus_read_4(sc->mem, PHYREG33) &
> + PHYREG33_PLL_KVCO_MASK) | PHYREG33_PLL_KVCO_VALUE);
> +
> + /* Enable controlling random jitter. */
> + bus_write_4(sc->mem, PHYREG12,
> + PHYREG12_PLL_LPF_ADJ_VALUE);
> +
> + /* Set PLL input clock divider 1/2 */
> + bus_write_4(sc->mem, PHYREG6,
> + (bus_read_4(sc->mem, PHYREG6) &
> + PHYREG6_PLL_DIV_MASK) | PHYREG6_PLL_DIV_2);
> +
> + /* Set PLL loop divider */
> + bus_write_4(sc->mem, PHYREG18, PHYREG18_PLL_LOOP);
> +
> + /* Set PLL LPF R1 to su_trim[0:7] */
> + bus_write_4(sc->mem, PHYREG11, PHYREG11_SU_TRIM_0_7);
> + }
> + if (sc->mode == PHY_TYPE_SATA) {
> + /* Set SSC downward spread spectrum */
> + bus_write_4(sc->mem, PHYREG32,
> + (bus_read_4(sc->mem, PHYREG32) & ~0x000000f0) |
> + PHYREG32_SSC_DOWNWARD | PHYREG32_SSC_OFFSET_500PPM);
> + }
> + break;
> +
> + default:
> + device_printf(dev, "unknown ref rate=%lu\n", rate);
> + break;
> + }
> +
> + if (OF_hasprop(sc->node, "rockchip,ext-refclk")) {
> + device_printf(dev, "UNSUPPORTED rockchip,ext-refclk\n");
> + }
> + if (OF_hasprop(sc->node, "rockchip,enable-ssc")) {
> + device_printf(dev, "setting rockchip,enable-ssc\n");
> + bus_write_4(sc->mem, PHYREG8,
> + bus_read_4(sc->mem, PHYREG8) | PHYREG8_SSC_EN);
> + }
> +
> + if (hwreset_deassert(sc->phy_reset))
> + device_printf(dev, "phy_reset failed to clear\n");
> +
> + return (0);
> +}
> +
> +static phynode_method_t rk3568_combphy_phynode_methods[] = {
> + PHYNODEMETHOD(phynode_enable, rk3568_combphy_enable),
> +
> + PHYNODEMETHOD_END
> +};
> +DEFINE_CLASS_1(rk3568_combphy_phynode, rk3568_combphy_phynode_class,
> + rk3568_combphy_phynode_methods, 0, phynode_class);
> +
> +
> +/* Device class and methods */
> +static int
> +rk3568_combphy_probe(device_t dev)
> +{
> +
> + if (!ofw_bus_status_okay(dev))
> + return (ENXIO);
> + if (ofw_bus_search_compatible(dev, compat_data)->ocd_data == 0)
> + return (ENXIO);
> + device_set_desc(dev, "RockChip combo PHY");
> + return (BUS_PROBE_DEFAULT);
> +}
> +
> +static int
> +rk3568_combphy_attach(device_t dev)
> +{
> + struct rk3568_combphy_softc *sc = device_get_softc(dev);
> + struct phynode_init_def phy_init;
> + struct phynode *phynode;
> + int rid = 0;
> +
> + sc->dev = dev;
> + sc->node = ofw_bus_get_node(dev);
> +
> + /* Get memory resource */
> + if (!(sc->mem = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
> + &rid, RF_ACTIVE))) {
> + device_printf(dev, "Cannot allocate memory resources\n");
> + return (ENXIO);
> + }
> +
> + /* Get syncons handles */
> + if (OF_hasprop(sc->node, "rockchip,pipe-grf") &&
> + syscon_get_by_ofw_property(dev, sc->node, "rockchip,pipe-grf",
> + &sc->pipe_grf))
> + return (ENXIO);
> + if (OF_hasprop(sc->node, "rockchip,pipe-phy-grf") &&
> + syscon_get_by_ofw_property(dev, sc->node, "rockchip,pipe-phy-grf",
> + &sc->pipe_phy_grf))
> + return (ENXIO);
> +
> + /* Get & enable clocks */
> + if (clk_get_by_ofw_name(dev, 0, "ref", &sc->ref_clk)) {
> + device_printf(dev, "getting ref failed\n");
> + return (ENXIO);
> + }
> + if (clk_enable(sc->ref_clk))
> + device_printf(dev, "enable ref failed\n");
> + if (clk_get_by_ofw_name(dev, 0, "apb", &sc->apb_clk)) {
> + device_printf(dev, "getting apb failed\n");
> + return (ENXIO);
> + }
> + if (clk_enable(sc->apb_clk))
> + device_printf(dev, "enable apb failed\n");
> + if (clk_get_by_ofw_name(dev, 0, "pipe", &sc->pipe_clk)) {
> + device_printf(dev, "getting pipe failed\n");
> + return (ENXIO);
> + }
> + if (clk_enable(sc->pipe_clk))
> + device_printf(dev, "enable pipe failed\n");
> +
> + /* get & assert reset */
> + if (hwreset_get_by_ofw_idx(dev, sc->node, 0, &sc->phy_reset)) {
> + device_printf(dev, "Cannot get reset\n");
> + return (ENXIO);
> + }
> + hwreset_assert(sc->phy_reset);
> +
> + bzero(&phy_init, sizeof(phy_init));
> + phy_init.id = 0;
> + phy_init.ofw_node = sc->node;
> + if (!(phynode = phynode_create(dev, &rk3568_combphy_phynode_class,
> + &phy_init))) {
> + device_printf(dev, "failed to create combphy PHY\n");
> + return (ENXIO);
> + }
> + if (!phynode_register(phynode)) {
> + device_printf(dev, "failed to register combphy PHY\n");
> + return (ENXIO);
> + }
> + sc->phynode = phynode;
> + sc->mode = 0;
> +
> + return (0);
> +}
> +
> +static int
> +rk3568_combphy_map(device_t dev, phandle_t xref, int ncells, pcell_t *cells,
> + intptr_t *id)
> +{
> + struct rk3568_combphy_softc *sc = device_get_softc(dev);
> +
> + if (phydev_default_ofw_map(dev, xref, ncells, cells, id))
> + return (ERANGE);
> +
> + /* Store the phy mode that is handed to us in id */
> + sc->mode = *id;
> +
> + /* Set our id to 0 so the std phy_get_*() works as usual */
> + *id = 0;
> +
> + return (0);
> +}
> +
> +static device_method_t rk3568_combphy_methods[] = {
> + DEVMETHOD(device_probe, rk3568_combphy_probe),
> + DEVMETHOD(device_attach, rk3568_combphy_attach),
> + DEVMETHOD(phydev_map, rk3568_combphy_map),
> +
> + DEVMETHOD_END
> +};
> +
> +DEFINE_CLASS_1(rk3568_combphy, rk3568_combphy_driver, rk3568_combphy_methods,
> + sizeof(struct simple_mfd_softc), simple_mfd_driver);
> +EARLY_DRIVER_MODULE(rk3568_combphy, simplebus, rk3568_combphy_driver,
> + 0, 0, BUS_PASS_RESOURCE + BUS_PASS_ORDER_LATE);
> diff --git a/sys/conf/files.arm64 b/sys/conf/files.arm64
> index df39a408867d..6c42812fcc42 100644
> --- a/sys/conf/files.arm64
> +++ b/sys/conf/files.arm64
> @@ -622,6 +622,7 @@ arm64/qualcomm/qcom_gcc.c optional
> qcom_gcc fdt
> # RockChip Drivers
> arm64/rockchip/rk3328_codec.c optional fdt rk3328codec
> soc_rockchip_rk3328
> arm64/rockchip/rk3399_emmcphy.c optional fdt rk_emmcphy
> soc_rockchip_rk3399
> +arm64/rockchip/rk3568_combphy.c optional fdt rk_combphy
> soc_rockchip_rk3568
> arm64/rockchip/rk3568_pcie.c optional fdt pci
> soc_rockchip_rk3568
> arm64/rockchip/rk3568_pciephy.c optional fdt pci
> soc_rockchip_rk3568
> arm64/rockchip/rk_dwc3.c optional fdt rk_dwc3
> soc_rockchip_rk3399 | fdt rk_dwc3 soc_rockchip_rk3568
