The branch main has been updated by ganbold:

URL: 
https://cgit.FreeBSD.org/src/commit/?id=85e7d8e0aea77b454a6b263edeb85c7e037e8d1e

commit 85e7d8e0aea77b454a6b263edeb85c7e037e8d1e
Author:     Søren Schmidt <s...@freebsd.org>
AuthorDate: 2022-12-13 05:58:51 +0000
Commit:     Ganbold Tsagaankhuu <ganb...@freebsd.org>
CommitDate: 2022-12-13 05:58:51 +0000

    Add driver for Motorcomm YT8511 GbE PHY
    
    Partially from: https://reviews.freebsd.org/D36093
---
 sys/dev/mii/mcommphy.c | 184 +++++++++++++++++++++++++++++++++++++++++++++++++
 sys/dev/mii/miidevs    |   4 ++
 2 files changed, 188 insertions(+)

diff --git a/sys/dev/mii/mcommphy.c b/sys/dev/mii/mcommphy.c
new file mode 100644
index 000000000000..6948045aaf4f
--- /dev/null
+++ b/sys/dev/mii/mcommphy.c
@@ -0,0 +1,184 @@
+/*
+ * Copyright (c) 2022 Jared McNeill <jmcne...@invisible.ca>
+ * Copyright (c) 2022 Soren Schmidt <s...@deepcore.dk>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+ * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * Motorcomm YT8511C / YT8511H Integrated 10/100/1000 Gigabit Ethernet phy
+ */
+
+#include <sys/cdefs.h>
+#include <sys/param.h>
+#include <sys/systm.h>
+#include <sys/kernel.h>
+#include <sys/socket.h>
+#include <sys/errno.h>
+#include <sys/module.h>
+#include <sys/bus.h>
+
+#include <net/if.h>
+#include <net/if_media.h>
+
+#include <dev/mii/mii.h>
+#include <dev/mii/miivar.h>
+
+#include "miibus_if.h"
+
+#define        MCOMMPHY_OUI                    0x000000
+#define        MCOMMPHY_MODEL                  0x10
+#define        MCOMMPHY_REV                    0x0a
+
+#define        EXT_REG_ADDR                    0x1e
+#define        EXT_REG_DATA                    0x1f
+
+/* Extended registers */
+#define        PHY_CLOCK_GATING_REG            0x0c
+#define         RX_CLK_DELAY_EN                0x0001
+#define         CLK_25M_SEL                    0x0006
+#define         CLK_25M_SEL_125M               3
+#define         TX_CLK_DELAY_SEL               0x00f0
+#define        PHY_SLEEP_CONTROL1_REG          0x27
+#define         PLLON_IN_SLP                   0x4000
+
+#define        LOWEST_SET_BIT(mask)            ((((mask) - 1) & (mask)) ^ 
(mask))
+#define        SHIFTIN(x, mask)                ((x) * LOWEST_SET_BIT(mask))
+
+static int
+mcommphy_service(struct mii_softc *sc, struct mii_data *mii, int cmd)
+{
+       switch (cmd) {
+       case MII_POLLSTAT:
+               break;
+
+       case MII_MEDIACHG:
+               mii_phy_setmedia(sc);
+               break;
+
+       case MII_TICK:
+               if (mii_phy_tick(sc) == EJUSTRETURN)
+                       return (0);
+               break;
+       }
+
+       /* Update the media status. */
+       PHY_STATUS(sc);
+
+       /* Callback if something changed. */
+       mii_phy_update(sc, cmd);
+
+       return (0);
+}
+
+static const struct mii_phy_funcs mcommphy_funcs = {
+       mcommphy_service,
+       ukphy_status,
+       mii_phy_reset
+};
+
+static int
+mcommphy_probe(device_t dev)
+{
+       struct mii_attach_args *ma = device_get_ivars(dev);
+
+       /*
+        * The YT8511C reports an OUI of 0. Best we can do here is to match
+        * exactly the contents of the PHY identification registers.
+        */
+       if (MII_OUI(ma->mii_id1, ma->mii_id2) == MCOMMPHY_OUI &&
+           MII_MODEL(ma->mii_id2) == MCOMMPHY_MODEL &&
+           MII_REV(ma->mii_id2) == MCOMMPHY_REV) {
+               device_set_desc(dev, "Motorcomm YT8511 media interface");
+               return BUS_PROBE_DEFAULT;
+       }
+       return (ENXIO);
+}
+
+static int
+mcommphy_attach(device_t dev)
+{
+       struct mii_softc *sc = device_get_softc(dev);
+       uint16_t oldaddr, data;
+
+       mii_phy_dev_attach(dev, MIIF_NOMANPAUSE, &mcommphy_funcs, 0);
+
+       PHY_RESET(sc);
+
+       /* begin chip stuff */
+       oldaddr = PHY_READ(sc, EXT_REG_ADDR);
+
+       PHY_WRITE(sc, EXT_REG_ADDR, PHY_CLOCK_GATING_REG);
+       data = PHY_READ(sc, EXT_REG_DATA);
+       data &= ~CLK_25M_SEL;
+       data |= SHIFTIN(CLK_25M_SEL_125M, CLK_25M_SEL);;
+       if (sc->mii_flags & MIIF_RX_DELAY) {
+               data |= RX_CLK_DELAY_EN;
+       } else {
+               data &= ~RX_CLK_DELAY_EN;
+       }
+       data &= ~TX_CLK_DELAY_SEL;
+       if (sc->mii_flags & MIIF_TX_DELAY) {
+               data |= SHIFTIN(0xf, TX_CLK_DELAY_SEL);
+       } else {
+               data |= SHIFTIN(0x2, TX_CLK_DELAY_SEL);
+       }
+       PHY_WRITE(sc, EXT_REG_DATA, data);
+
+       PHY_WRITE(sc, EXT_REG_ADDR, PHY_SLEEP_CONTROL1_REG);
+       data = PHY_READ(sc, EXT_REG_DATA);
+       data |= PLLON_IN_SLP;
+       PHY_WRITE(sc, EXT_REG_DATA, data);
+
+       PHY_WRITE(sc, EXT_REG_ADDR, oldaddr);
+       /* end chip stuff */
+
+       sc->mii_capabilities = PHY_READ(sc, MII_BMSR) & sc->mii_capmask;
+       if (sc->mii_capabilities & BMSR_EXTSTAT)
+               sc->mii_extcapabilities = PHY_READ(sc, MII_EXTSR);
+       device_printf(dev, " ");
+       mii_phy_add_media(sc);
+       printf("\n");
+
+       MIIBUS_MEDIAINIT(sc->mii_dev);
+
+       return (0);
+}
+
+
+static device_method_t mcommphy_methods[] = {
+       /* device interface */
+       DEVMETHOD(device_probe,         mcommphy_probe),
+       DEVMETHOD(device_attach,        mcommphy_attach),
+       DEVMETHOD(device_detach,        mii_phy_detach),
+       DEVMETHOD(device_shutdown,      bus_generic_shutdown),
+       DEVMETHOD_END
+};
+
+static driver_t mcommphy_driver = {
+       "mcommphy",
+       mcommphy_methods,
+       sizeof(struct mii_softc)
+};
+
+DRIVER_MODULE(mcommphy, miibus, mcommphy_driver, 0, 0);
diff --git a/sys/dev/mii/miidevs b/sys/dev/mii/miidevs
index 1ef40a9b116d..c6e1226687bb 100644
--- a/sys/dev/mii/miidevs
+++ b/sys/dev/mii/miidevs
@@ -63,6 +63,7 @@ oui JMICRON                   0x00d831        JMicron 
Technologies
 oui LEVEL1                     0x00207b        Level 1
 oui MARVELL                    0x005043        Marvell Semiconductor
 oui MICREL                     0x0010a1        Micrel
+oui MOTORCOMM                  0x000000        Motorcomm
 oui MYSON                      0x00c0b4        Myson Technology
 oui NATSEMI                    0x080017        National Semiconductor
 oui PMCSIERRA                  0x00e004        PMC-Sierra
@@ -291,6 +292,9 @@ model MICREL KSZ8081                0x0016 Micrel KSZ8081 
10/100 PHY
 model MICREL KSZ9021           0x0021 Micrel KSZ9021 10/100/1000 PHY
 model MICREL KSZ9031           0x0022 Micrel KSZ9031 10/100/1000 PHY
 
+/* Motorcomm PHYs */
+model MOTORCOMM YT8511         0x010a Motorcomm YT8511 10/100/1000 PHY
+
 /* Myson Technology PHYs */
 model xxMYSON MTD972           0x0000 MTD972 10/100 media interface
 model MYSON MTD803             0x0000 MTD803 3-in-1 media interface

Reply via email to