The branch main has been updated by manu:

URL: 
https://cgit.FreeBSD.org/src/commit/?id=5b2a81f58dc722ca76065536f07ba47efd98dc63

commit 5b2a81f58dc722ca76065536f07ba47efd98dc63
Author:     Emmanuel Vadot <m...@freebsd.org>
AuthorDate: 2021-05-16 12:48:56 +0000
Commit:     Emmanuel Vadot <m...@freebsd.org>
CommitDate: 2021-05-21 15:36:20 +0000

    mmc: Add mmc-pwrseq driver
    
    This driver is used to power up sdio card or eMMC.
    It handle the reset-gpio, clocks and needed delays for powerup/powerdown.
    
    Sponsored by:   Diablotin Systems
    Differential Revision:  https://reviews.freebsd.org/D30288
---
 sys/conf/files              |   2 +
 sys/dev/mmc/mmc_pwrseq.c    | 194 ++++++++++++++++++++++++++++++++++++++++++++
 sys/dev/mmc/mmc_pwrseq_if.m |  38 +++++++++
 3 files changed, 234 insertions(+)

diff --git a/sys/conf/files b/sys/conf/files
index 22083169bfc7..70cdd9f68dc6 100644
--- a/sys/conf/files
+++ b/sys/conf/files
@@ -2476,6 +2476,8 @@ dev/mmc/mmcbr_if.m                standard
 dev/mmc/mmcbus_if.m            standard
 dev/mmc/mmcsd.c                        optional mmcsd !mmccam
 dev/mmc/mmc_fdt_helpers.c      optional mmc fdt | mmccam fdt
+dev/mmc/mmc_pwrseq.c           optional mmc fdt | mmccam fdt
+dev/mmc/mmc_pwrseq_if.m                optional mmc fdt | mmccam fdt
 dev/mmcnull/mmcnull.c          optional mmcnull
 dev/mpr/mpr.c                  optional mpr
 dev/mpr/mpr_config.c           optional mpr
diff --git a/sys/dev/mmc/mmc_pwrseq.c b/sys/dev/mmc/mmc_pwrseq.c
new file mode 100644
index 000000000000..d4ccf814fe53
--- /dev/null
+++ b/sys/dev/mmc/mmc_pwrseq.c
@@ -0,0 +1,194 @@
+/*
+ * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
+ *
+ * Copyright 2021 Emmanuel Vadot <m...@freebsd.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ *
+ *  1. Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *  2. Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in the
+ *     documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <sys/cdefs.h>
+__FBSDID("$FreeBSD$");
+
+#include <sys/param.h>
+#include <sys/bus.h>
+#include <sys/kernel.h>
+#include <sys/module.h>
+#include <sys/gpio.h>
+
+#include <dev/gpio/gpiobusvar.h>
+#include <dev/ofw/ofw_bus.h>
+#include <dev/ofw/ofw_bus_subr.h>
+
+#include <dev/extres/clk/clk.h>
+
+#include "mmc_pwrseq_if.h"
+
+enum pwrseq_type {
+       PWRSEQ_SIMPLE = 1,
+       PWRSEQ_EMMC,
+};
+
+static struct ofw_compat_data compat_data[] = {
+       { "mmc-pwrseq-simple",  PWRSEQ_SIMPLE },
+       { "mmc-pwrseq-emmc",    PWRSEQ_EMMC },
+       { NULL,                 0 }
+};
+
+struct mmc_pwrseq_softc {
+       enum pwrseq_type        type;
+       clk_t                   ext_clock;
+       struct gpiobus_pin      *reset_gpio;
+
+       uint32_t                post_power_on_delay_ms;
+       uint32_t                power_off_delay_us;
+};
+
+static int
+mmc_pwrseq_probe(device_t dev)
+{
+       enum pwrseq_type type;
+
+       if (!ofw_bus_search_compatible(dev, compat_data)->ocd_data)
+               return (ENXIO);
+
+       type = (enum pwrseq_type)ofw_bus_search_compatible(dev, 
compat_data)->ocd_data;
+       switch (type) {
+       case PWRSEQ_SIMPLE:
+               device_set_desc(dev, "MMC Simple Power sequence");
+               break;
+       case PWRSEQ_EMMC:
+               device_set_desc(dev, "MMC eMMC Power sequence");
+               break;
+       }
+       return (BUS_PROBE_DEFAULT);
+}
+
+static int
+mmc_pwrseq_attach(device_t dev)
+{
+       struct mmc_pwrseq_softc *sc;
+       phandle_t node;
+       int rv;
+
+       sc = device_get_softc(dev);
+       sc->type = (enum pwrseq_type)ofw_bus_search_compatible(dev, 
compat_data)->ocd_data;
+       node = ofw_bus_get_node(dev);
+
+       if (sc->type == PWRSEQ_SIMPLE) {
+               if (OF_hasprop(node, "clocks")) {
+                       rv = clk_get_by_ofw_name(dev, 0, "ext_clock", 
&sc->ext_clock);
+                       if (rv != 0) {
+                               device_printf(dev,
+                                   "Node have a clocks property but no clocks 
named \"ext_clock\"\n");
+                               return (ENXIO);
+                       }
+               }
+               OF_getencprop(node, "post-power-on-delay-ms", 
&sc->post_power_on_delay_ms, sizeof(uint32_t));
+               OF_getencprop(node, "power-off-delay-us", 
&sc->power_off_delay_us, sizeof(uint32_t));
+       }
+
+       if (OF_hasprop(node, "reset-gpios")) {
+               if (gpio_pin_get_by_ofw_property(dev, node, "reset-gpios",
+                   &sc->reset_gpio) != 0) {
+                       device_printf(dev, "Cannot get the reset-gpios\n");
+                       return (ENXIO);
+               }
+               gpio_pin_setflags(sc->reset_gpio, GPIO_PIN_OUTPUT);
+               gpio_pin_set_active(sc->reset_gpio, true);
+       }
+
+       OF_device_register_xref(OF_xref_from_node(node), dev);
+       return (0);
+}
+
+static int
+mmc_pwrseq_detach(device_t dev)
+{
+
+       return (EBUSY);
+}
+
+static int
+mmv_pwrseq_set_power(device_t dev, bool power_on)
+{
+       struct mmc_pwrseq_softc *sc;
+       int rv;
+
+       sc = device_get_softc(dev);
+
+       if (power_on) {
+               if (sc->ext_clock) {
+                       rv = clk_enable(sc->ext_clock);
+                       if (rv != 0)
+                               return (rv);
+               }
+
+               if (sc->reset_gpio) {
+                       rv = gpio_pin_set_active(sc->reset_gpio, false);
+                       if (rv != 0)
+                               return (rv);
+               }
+
+               if (sc->post_power_on_delay_ms)
+                       DELAY(sc->post_power_on_delay_ms * 1000);
+       } else {
+               if (sc->reset_gpio) {
+                       rv = gpio_pin_set_active(sc->reset_gpio, true);
+                       if (rv != 0)
+                               return (rv);
+               }
+
+               if (sc->ext_clock) {
+                       rv = clk_stop(sc->ext_clock);
+                       if (rv != 0)
+                               return (rv);
+               }
+               if (sc->power_off_delay_us)
+                       DELAY(sc->power_off_delay_us);
+       }
+
+       return (0);
+}
+
+static device_method_t mmc_pwrseq_methods[] = {
+       /* Device interface */
+       DEVMETHOD(device_probe,         mmc_pwrseq_probe),
+       DEVMETHOD(device_attach,        mmc_pwrseq_attach),
+       DEVMETHOD(device_detach,        mmc_pwrseq_detach),
+
+       DEVMETHOD(mmc_pwrseq_set_power, mmv_pwrseq_set_power),
+       DEVMETHOD_END
+};
+
+static driver_t mmc_pwrseq_driver = {
+       "mmc_pwrseq",
+       mmc_pwrseq_methods,
+       sizeof(struct mmc_pwrseq_softc),
+};
+
+static devclass_t mmc_pwrseq_devclass;
+
+EARLY_DRIVER_MODULE(mmc_pwrseq, simplebus, mmc_pwrseq_driver, 
mmc_pwrseq_devclass, 0, 0,
+       BUS_PASS_SUPPORTDEV + BUS_PASS_ORDER_FIRST);
+MODULE_VERSION(mmc_pwrseq, 1);
+SIMPLEBUS_PNP_INFO(compat_data);
diff --git a/sys/dev/mmc/mmc_pwrseq_if.m b/sys/dev/mmc/mmc_pwrseq_if.m
new file mode 100644
index 000000000000..e94b44052c20
--- /dev/null
+++ b/sys/dev/mmc/mmc_pwrseq_if.m
@@ -0,0 +1,38 @@
+#-
+# SPDX-License-Identifier: BSD-2-Clause-FreeBSD
+#
+# Copyright (c) 2021 Emmanuel Vadot <m...@freebsd.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in the
+#    documentation and/or other materials provided with the distribution.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+# SUCH DAMAGE.
+#
+# $FreeBSD$
+#
+
+INTERFACE mmc_pwrseq;
+
+#
+# Power up/down the card
+#
+METHOD int set_power {
+       device_t        bus;
+       bool            power_on;
+};
_______________________________________________
dev-commits-src-all@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/dev-commits-src-all
To unsubscribe, send any mail to "dev-commits-src-all-unsubscr...@freebsd.org"

Reply via email to