I had this same problem with the v1.2 and v1.3 (maybe nightly as well) images from the geeksphone site.
Recently I built mozilla git master w/ gecko and gaia checked out at v1.3 and it's working fine for adb. I believe I recovered my phone several times from this state by starting flash.sh while the phone was on and then doing a restart from the UI via the power button. Then during that 10 second window things proceed and I got a different version loaded. -Craig On Monday, February 3, 2014 5:06 PM, Worik Stanton <[email protected]> wrote: My keon has ceased to work. The short of it is if I cycle the power on the phone while it is plugged in adb devices reports a full_keon attached for about 10 seconds, then it stops seeing it. I have a syslog dump attached, I plugged the phone in at 11:45:45, adb reported seeing the device a few seconds later (about 3) and at from the syslog we can see that adb failed at 11:46:08. How should I proceed? What are my options? The long story is: Following https://developer.mozilla.org/en-US/Firefox_OS/Platform/Gaia/Hacking I updated gaia on my phone. (I had been running 1.3 from the Geeksphone site) Everything on the phone was good. I could not connect to it through the app manager nor adb, and I was debugging that. Experimenting with the settings in the "developer" menu (first I had seen of that). Now I have a problem with gaia in that the UI has some strange setting. Briefly (this is not the dev-Gaia list) it has one UI element highlighted, and swiping moves the focus in a manner reminiscent of tabbing through a form and double tapping on the screen activates that element. But I cannot access settings as the only access to them is via the second screen that I can only access through a swipe, that does not change to that screen. Anyhow, what I want to do is flash my phone with a different system so I can get hacking on it again. But since adb cannot see it I have a problem. If I cycle the power on the phone (because of the problems with gaia settings the only way to do that is removeing/reinstalling the battery) adb can access the phone (adb devices lists a "full keon") for about 10 seconds. I am planning to write a small script to take advantage of that window and stop b2g while I can still access it. I know very little about adb so that will take me most of today. I would like advice from anybody here who might know more than me what might be happening to my pphone. I have attached my syslog for the period. I plugged the phone battery in at 11:45:45, adb reported seeing the device a few seconds later (about 3) and at from the syslog we can see that adb failed at 11:46:08. cheers Worik -- The only true evil is turning people into things.... Granny Weatherwax [email protected] 021-1680650, (03) 4821804 Aotearoa (New Zealand) _______________________________________________ dev-b2g mailing list [email protected] https://lists.mozilla.org/listinfo/dev-b2g _______________________________________________ dev-b2g mailing list [email protected] https://lists.mozilla.org/listinfo/dev-b2g
