Julien, no worries! I'll probably wait for the Peak+ to come out before attempting again :)
On Wed, Aug 28, 2013 at 1:25 PM, Julien Wajsberg <[email protected]>wrote: > Le 28/08/2013 15:47, Kevin Hankens a écrit : > > Also, make sure that you enable USB 2.0 support and create a filter in > the > > virtualbox host configuration. The other difficult thing is that you'll > > need two filters in virtualbox, one for the ZTE vendor and one for the > > standard Google vendor (fastboot). The only way I was able to do this was > > to start flash.sh and then go back to the host and enable the new filter, > > then run lsusb to get the vendor and product ids. You will also need two > > corresponding rules in your /etc/udev/rules.d/ file... something like the > > following: > > > > SUBSYSTEM=="usb", ATTR{idVendor}=="19d2", ATTR{idProduct}=="1350", > > MODE="0666", GROUP="plugdev" > > SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="d00d", > > MODE="0666", GROUP="plugdev" > > I usually only use the idVendor, and the "18d1" one is actually always > the same for fastboot. > > > > > Now, that said, after all of that work, it turns out that my ZTE Open > > didn't have root access, so all I succeeded in doing was wiping my > userdata > > :) > > sorry :( > > -- Kevin Hankens 207.632.9342 www.kevinhankens.com [email protected] _______________________________________________ dev-b2g mailing list [email protected] https://lists.mozilla.org/listinfo/dev-b2g
