Public bug reported:
change to builder config in RLIMIT_NOFILE resulted in one of the tests
to fail. The original value of 1024 is now changed to 65535. ADT test
framework in u-d-c is intended to rise this value to 8180, but only if
it was lower than that. Then it checks that the limit is set to 8180.
After the change to the builder config, the tests fail because the value
is higher than 8180, but the subsequent test is still performed. Testing
framework became too dependent on builder's internal config.
[ Impact ]
ADT testing fails
[ Test Plan ]
Run ADT tests
[ Where problems could occur ]
during ADT testing
[ Other Info ]
Caused by commit:
commit 95ab52ae6a00f1cd75bd842486849c0bdb74c71c
Author: Alberto Milone <alberto.mil...@canonical.com>
Date: Mon Mar 7 13:38:19 2022 +0100
Change maximum open files limit for the shell
This patch is no longer needed and can be reverted
** Affects: ubuntu-drivers-common (Ubuntu)
Importance: Undecided
Status: New
** Affects: ubuntu-drivers-common (Ubuntu Jammy)
Importance: Undecided
Status: New
** Affects: ubuntu-drivers-common (Ubuntu Noble)
Importance: Undecided
Status: New
** Affects: ubuntu-drivers-common (Ubuntu Oracular)
Importance: Undecided
Status: New
** Also affects: ubuntu-drivers-common (Ubuntu Noble)
Importance: Undecided
Status: New
** Also affects: ubuntu-drivers-common (Ubuntu Oracular)
Importance: Undecided
Status: New
** Also affects: ubuntu-drivers-common (Ubuntu Jammy)
Importance: Undecided
Status: New
** Description changed:
change to builder config in RLIMIT_NOFILE resulted in one of the test
failing. The original value of 1024 was changed to 65535. ADT test
framework in u-d-c is rising this value to 8180 only if it was lower
than that. then it checks that the limit is set to 8180. After the
change to the builder config, the tests fail
[ Impact ]
ADT testing fails
[ Test Plan ]
Run ADT tests
[ Where problems could occur ]
during ADT testing
[ Other Info ]
- Cause by commit:
+ Caused by commit:
commit 95ab52ae6a00f1cd75bd842486849c0bdb74c71c
Author: Alberto Milone <alberto.mil...@canonical.com>
Date: Mon Mar 7 13:38:19 2022 +0100
- Change maximum open files limit for the shell
+ Change maximum open files limit for the shell
This patch is no longer needed and can be reverted
** Description changed:
- change to builder config in RLIMIT_NOFILE resulted in one of the test
- failing. The original value of 1024 was changed to 65535. ADT test
+ change to builder config in RLIMIT_NOFILE resulted in one of the tests
+ to fail. The original value of 1024 is now changed to 65535. ADT test
framework in u-d-c is rising this value to 8180 only if it was lower
than that. then it checks that the limit is set to 8180. After the
change to the builder config, the tests fail
[ Impact ]
ADT testing fails
[ Test Plan ]
Run ADT tests
[ Where problems could occur ]
during ADT testing
[ Other Info ]
Caused by commit:
commit 95ab52ae6a00f1cd75bd842486849c0bdb74c71c
Author: Alberto Milone <alberto.mil...@canonical.com>
Date: Mon Mar 7 13:38:19 2022 +0100
Change maximum open files limit for the shell
This patch is no longer needed and can be reverted
** Description changed:
change to builder config in RLIMIT_NOFILE resulted in one of the tests
to fail. The original value of 1024 is now changed to 65535. ADT test
- framework in u-d-c is rising this value to 8180 only if it was lower
- than that. then it checks that the limit is set to 8180. After the
- change to the builder config, the tests fail
+ framework in u-d-c is intended to rise this value to 8180, but only if
+ it was lower than that. Then it checks that the limit is set to 8180.
+ After the change to the builder config, the tests fail because the value
+ is higher than 8180, but the subsequent test is still performed. Testing
+ framework became too dependent on builder's internal config.
[ Impact ]
ADT testing fails
[ Test Plan ]
Run ADT tests
[ Where problems could occur ]
during ADT testing
[ Other Info ]
Caused by commit:
commit 95ab52ae6a00f1cd75bd842486849c0bdb74c71c
Author: Alberto Milone <alberto.mil...@canonical.com>
Date: Mon Mar 7 13:38:19 2022 +0100
Change maximum open files limit for the shell
This patch is no longer needed and can be reverted
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to ubuntu-drivers-common in Ubuntu.
https://bugs.launchpad.net/bugs/2077646
Title:
revert RLIMIT_NOFILE set and test
Status in ubuntu-drivers-common package in Ubuntu:
New
Status in ubuntu-drivers-common source package in Jammy:
New
Status in ubuntu-drivers-common source package in Noble:
New
Status in ubuntu-drivers-common source package in Oracular:
New
Bug description:
change to builder config in RLIMIT_NOFILE resulted in one of the tests
to fail. The original value of 1024 is now changed to 65535. ADT test
framework in u-d-c is intended to rise this value to 8180, but only if
it was lower than that. Then it checks that the limit is set to 8180.
After the change to the builder config, the tests fail because the
value is higher than 8180, but the subsequent test is still performed.
Testing framework became too dependent on builder's internal config.
[ Impact ]
ADT testing fails
[ Test Plan ]
Run ADT tests
[ Where problems could occur ]
during ADT testing
[ Other Info ]
Caused by commit:
commit 95ab52ae6a00f1cd75bd842486849c0bdb74c71c
Author: Alberto Milone <alberto.mil...@canonical.com>
Date: Mon Mar 7 13:38:19 2022 +0100
Change maximum open files limit for the shell
This patch is no longer needed and can be reverted
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/ubuntu-drivers-common/+bug/2077646/+subscriptions
--
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help : https://help.launchpad.net/ListHelp
