A few things since I last posted:
After having done the below command...
`amixer -c 1 cset numid=3,name='Speaker Force Firmware Load' 1`
Every subsequent reboot the audio never broke. I had multiple 2+ hour
sessions with no issue.
I never re-ran the above command.
Adjusting the volume would have a noticeable 'delay' (around 0.5
seconds to 3 seconds) before the audio mixer related GUI would
respond.
As a test I did a fresh install of endeavour-os (on kernel 6.8.7) and
sure enough, the issue is back and I can break the audio in less than
5 minutes of use.
> It would help if someone dumps the registers as root, when the amplifiers are
not working
Unfortunately, the result of the below command are as follows once audio breaks:
$ su root
# rmmod snd_hda_scodec_tas2781_i2c
# i2cset -y 3 0x70 0x00 0x00
Error: Write failed
# i2cset -y 3 0x70 0x00 0x00
Error: Write failed
# i2cset -y 3 0x70 0x7f 0x00
Error: Write failed
# i2cdump -y 3 0x70
No size specified (using byte-data access)
0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef
00: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XXXXXXXXXXXXXXXX
10: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XXXXXXXXXXXXXXXX
20: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XXXXXXXXXXXXXXXX
30: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XXXXXXXXXXXXXXXX
40: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XXXXXXXXXXXXXXXX
50: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XXXXXXXXXXXXXXXX
60: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XXXXXXXXXXXXXXXX
70: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XXXXXXXXXXXXXXXX
80: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XXXXXXXXXXXXXXXX
90: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XXXXXXXXXXXXXXXX
a0: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XXXXXXXXXXXXXXXX
b0: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XXXXXXXXXXXXXXXX
c0: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XXXXXXXXXXXXXXXX
d0: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XXXXXXXXXXXXXXXX
e0: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XXXXXXXXXXXXXXXX
f0: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XXXXXXXXXXXXXXXX
After modprobe snd_hda_scodec_tas2781_i2c is run, audio actually works
again, for a few minutes.
I will note I get the same result above even if I do it while audio
works, so if I'm doing something wrong please let me know.
For testing purposes, if I want to enable/disable your workaround
solution, would changing the 1 at the end to 0 be sufficient?
`amixer -c 1 cset numid=3,name='Speaker Force Firmware Load' 1` ->
`amixer -c 1 cset numid=3,name='Speaker Force Firmware Load' 0`
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1958019
Title:
[Lenovo Legion7 16ACHg6 82N6, Realtek ALC287, Speaker, Internal] No
sound at all
Status in sound-2.6 (alsa-kernel):
Confirmed
Status in alsa-driver package in Ubuntu:
Confirmed
Bug description:
On my Lenovo Legion-7-16ACHg6 laptop I can't hear any sound by
internal speakers, but it work by headphones connected to standard
jack aux.
uname -r
5.11.0-44-generic
ProblemType: Bug
DistroRelease: Ubuntu 20.04
Package: alsa-base 1.0.25+dfsg-0ubuntu5
ProcVersionSignature: Ubuntu 5.11.0-44.48~20.04.2-generic 5.11.22
Uname: Linux 5.11.0-44-generic x86_64
NonfreeKernelModules: nvidia_modeset nvidia
ApportVersion: 2.20.11-0ubuntu27.21
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC2: i3draven 1266 F.... pulseaudio
/dev/snd/controlC0: i3draven 1266 F.... pulseaudio
/dev/snd/controlC1: i3draven 1266 F.... pulseaudio
/dev/snd/pcmC1D0p: i3draven 1266 F...m pulseaudio
CasperMD5CheckResult: skip
CurrentDesktop: ubuntu:GNOME
Date: Sat Jan 15 15:10:53 2022
InstallationDate: Installed on 2021-10-11 (96 days ago)
InstallationMedia: Ubuntu 20.04.3 LTS "Focal Fossa" - Release amd64 (20210819)
PackageArchitecture: all
SourcePackage: alsa-driver
Symptom: audio
Symptom_AlsaPlaybackTest: ALSA playback test through plughw:Generic failed
Symptom_Card: Family 17h (Models 10h-1fh) HD Audio Controller - HD-Audio
Generic
Symptom_DevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC2: i3draven 1266 F.... pulseaudio
/dev/snd/controlC0: i3draven 1266 F.... pulseaudio
/dev/snd/controlC1: i3draven 1266 F.... pulseaudio
/dev/snd/pcmC1D0p: i3draven 1266 F...m pulseaudio
Symptom_Jack: Speaker, Internal
Symptom_Type: No sound at all
Title: [82N6, Realtek ALC287, Speaker, Internal] No sound at all
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 11/08/2021
dmi.bios.release: 1.49
dmi.bios.vendor: LENOVO
dmi.bios.version: GKCN49WW
dmi.board.asset.tag: NO Asset Tag
dmi.board.name: LNVNB161216
dmi.board.vendor: LENOVO
dmi.board.version: SDK0R32862 WIN
dmi.chassis.asset.tag: NO Asset Tag
dmi.chassis.type: 10
dmi.chassis.vendor: LENOVO
dmi.chassis.version: Legion 7 16ACHg6
dmi.ec.firmware.release: 1.49
dmi.modalias:
dmi:bvnLENOVO:bvrGKCN49WW:bd11/08/2021:br1.49:efr1.49:svnLENOVO:pn82N6:pvrLegion716ACHg6:skuLENOVO_MT_82N6_BU_idea_FM_Legion716ACHg6:rvnLENOVO:rnLNVNB161216:rvrSDK0R32862WIN:cvnLENOVO:ct10:cvrLegion716ACHg6:
dmi.product.family: Legion 7 16ACHg6
dmi.product.name: 82N6
dmi.product.sku: LENOVO_MT_82N6_BU_idea_FM_Legion 7 16ACHg6
dmi.product.version: Legion 7 16ACHg6
dmi.sys.vendor: LENOVO
To manage notifications about this bug go to:
https://bugs.launchpad.net/sound-2.6/+bug/1958019/+subscriptions
--
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help : https://help.launchpad.net/ListHelp
