Public bug reported:
Ran this:
sudo apt-get install texstudio
Reading package lists... Done
Building dependency tree
Reading state information... Done
texstudio is already the newest version (2.12.6+debian-2).
The following packages were automatically installed and are no longer required:
linux-headers-4.15.0-32 linux-modules-4.15.0-32-generic
Use 'sudo apt autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 58 not upgraded.
12 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Do you want to continue? [Y/n] y
Setting up libglib2.0-dev-bin (2.56.2-0ubuntu0.18.04.1) ...
E: py3compile:243: Requested versions are not installed
dpkg: error processing package libglib2.0-dev-bin (--configure):
installed libglib2.0-dev-bin package post-installation script subprocess
returned error exit status 3
dpkg: dependency problems prevent configuration of libglib2.0-dev:amd64:
libglib2.0-dev:amd64 depends on libglib2.0-dev-bin (=
2.56.2-0ubuntu0.18.04.1); however:
Package libglib2.0-dev-bin is not configured yet.
dpkg: error processing package libglib2.0-dev:amd64 (--configure):
dependency problems - leaving unconfigured
Setting up python3-problem-report (2.20.9-0ubuntu7.3) ...
No apport report written because the error message indicates its a followup
error from a previous failure.
E: py3compile:243: Requested versions are not
installed
dpkg: error processing package python3-problem-report (--configure):
installed python3-problem-report package post-installation script subprocess
returned error exit status 3
Setting up python3-software-properties (0.96.24.32.5) ...
E: py3compile:243: Requested versions are not installed
dpkg: error processing package python3-software-properties (--configure):
installed python3-software-properties package post-installation script
subprocess returned error exit status 3
No apport report written because MaxReports is reached already
dpkg: dependency
problems prevent configuration of software-properties-common:
software-properties-common depends on python3-software-properties (=
0.96.24.32.5); however:
Package python3-software-properties is not configured yet.
dpkg: error processing package software-properties-common (--configure):
dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
dpkg: dependency
problems prevent configuration of python3-apport:
python3-apport depends on python3-problem-report (>= 0.94); however:
Package python3-problem-report is not configured yet.
dpkg: error processing package python3-apport (--configure):
dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
dpkg: dependency
problems prevent configuration of software-properties-gtk:
software-properties-gtk depends on python3-software-properties (=
0.96.24.32.5); however:
Package python3-software-properties is not configured yet.
software-properties-gtk depends on software-properties-common; however:
Package software-properties-common is not configured yet.
dpkg: error processing package software-properties-gtk (--configure):
dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
dpkg: dependency
problems prevent configuration of gnome-software:
gnome-software depends on software-properties-gtk; however:
Package software-properties-gtk is not configured yet.
dpkg: error processing package gnome-software (--configure):
dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
dpkg: dependency
problems prevent configuration of apport:
apport depends on python3-apport (>= 2.20.9-0ubuntu7.3); however:
Package python3-apport is not configured yet.
dpkg: error processing package apport (--configure):
dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
dpkg: dependency
problems prevent configuration of ubuntu-software:
ubuntu-software depends on gnome-software (>= 3.28.1-0ubuntu4.18.04.3);
however:
Package gnome-software is not configured yet.
dpkg: error processing package ubuntu-software (--configure):
dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
dpkg: dependency
problems prevent configuration of gnome-software-plugin-snap:
gnome-software-plugin-snap depends on gnome-software (=
3.28.1-0ubuntu4.18.04.3); however:
Package gnome-software is not configured yet.
dpkg: error processing package gnome-software-plugin-snap (--configure):
dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
dpkg: dependency
problems prevent configuration of apport-gtk:
apport-gtk depends on python3-apport (>= 2.20.9-0ubuntu7.3); however:
Package python3-apport is not configured yet.
apport-gtk depends on apport (>= 0.41); however:
Package apport is not configured yet.
dpkg: error processing package apport-gtk (--configure):
dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
Errors were
encountered while processing:
libglib2.0-dev-bin
libglib2.0-dev:amd64
python3-problem-report
python3-software-properties
software-properties-common
python3-apport
software-properties-gtk
gnome-software
apport
ubuntu-software
gnome-software-plugin-snap
apport-gtk
ProblemType: Package
DistroRelease: Ubuntu 18.04
Package: libglib2.0-dev-bin 2.56.2-0ubuntu0.18.04.1
ProcVersionSignature: Ubuntu 4.15.0-34.37-generic 4.15.18
Uname: Linux 4.15.0-34-generic x86_64
ApportVersion: 2.20.9-0ubuntu7.3
AptOrdering: NULL: ConfigurePending
Architecture: amd64
Date: Fri Sep 21 13:34:18 2018
DpkgTerminalLog:
Setting up libglib2.0-dev-bin (2.56.2-0ubuntu0.18.04.1) ...
E: py3compile:243: Requested versions are not installed
dpkg: error processing package libglib2.0-dev-bin (--configure):
installed libglib2.0-dev-bin package post-installation script subprocess
returned error exit status 3
DuplicateSignature:
package:libglib2.0-dev-bin:2.56.2-0ubuntu0.18.04.1
Setting up libglib2.0-dev-bin (2.56.2-0ubuntu0.18.04.1) ...
E: py3compile:243: Requested versions are not installed
dpkg: error processing package libglib2.0-dev-bin (--configure):
installed libglib2.0-dev-bin package post-installation script subprocess
returned error exit status 3
ErrorMessage: installed libglib2.0-dev-bin package post-installation script
subprocess returned error exit status 3
InstallationDate: Installed on 2016-07-05 (807 days ago)
InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1)
Python3Details: /usr/bin/python3.6m, Python 3.6.5, python3-minimal,
3.6.5-3ubuntu1
PythonDetails: /usr/bin/python2.7, Python 2.7.15rc1, python-minimal,
2.7.15~rc1-1
RelatedPackageVersions:
dpkg 1.19.0.5ubuntu2
apt 1.6.3ubuntu0.1
SourcePackage: glib2.0
Title: package libglib2.0-dev-bin 2.56.2-0ubuntu0.18.04.1 failed to
install/upgrade: installed libglib2.0-dev-bin package post-installation script
subprocess returned error exit status 3
UpgradeStatus: Upgraded to bionic on 2018-08-19 (32 days ago)
** Affects: glib2.0 (Ubuntu)
Importance: Undecided
Status: New
** Tags: amd64 apport-package bionic
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to glib2.0 in Ubuntu.
https://bugs.launchpad.net/bugs/1793733
Title:
package libglib2.0-dev-bin 2.56.2-0ubuntu0.18.04.1 failed to
install/upgrade: installed libglib2.0-dev-bin package post-
installation script subprocess returned error exit status 3
Status in glib2.0 package in Ubuntu:
New
Bug description:
Ran this:
sudo apt-get install texstudio
Reading package lists... Done
Building dependency tree
Reading state information... Done
texstudio is already the newest version (2.12.6+debian-2).
The following packages were automatically installed and are no longer
required:
linux-headers-4.15.0-32 linux-modules-4.15.0-32-generic
Use 'sudo apt autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 58 not upgraded.
12 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Do you want to continue? [Y/n] y
Setting up libglib2.0-dev-bin (2.56.2-0ubuntu0.18.04.1) ...
E: py3compile:243: Requested versions are not installed
dpkg: error processing package libglib2.0-dev-bin (--configure):
installed libglib2.0-dev-bin package post-installation script subprocess
returned error exit status 3
dpkg: dependency problems prevent configuration of libglib2.0-dev:amd64:
libglib2.0-dev:amd64 depends on libglib2.0-dev-bin (=
2.56.2-0ubuntu0.18.04.1); however:
Package libglib2.0-dev-bin is not configured yet.
dpkg: error processing package libglib2.0-dev:amd64 (--configure):
dependency problems - leaving unconfigured
Setting up python3-problem-report (2.20.9-0ubuntu7.3) ...
No apport report written because the error message indicates its a followup
error from a previous failure.
E: py3compile:243: Requested versions are not
installed
dpkg: error processing package python3-problem-report (--configure):
installed python3-problem-report package post-installation script subprocess
returned error exit status 3
Setting up python3-software-properties (0.96.24.32.5) ...
E: py3compile:243: Requested versions are not installed
dpkg: error processing package python3-software-properties (--configure):
installed python3-software-properties package post-installation script
subprocess returned error exit status 3
No apport report written because MaxReports is reached already
dpkg:
dependency problems prevent configuration of software-properties-common:
software-properties-common depends on python3-software-properties (=
0.96.24.32.5); however:
Package python3-software-properties is not configured yet.
dpkg: error processing package software-properties-common (--configure):
dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
dpkg:
dependency problems prevent configuration of python3-apport:
python3-apport depends on python3-problem-report (>= 0.94); however:
Package python3-problem-report is not configured yet.
dpkg: error processing package python3-apport (--configure):
dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
dpkg:
dependency problems prevent configuration of software-properties-gtk:
software-properties-gtk depends on python3-software-properties (=
0.96.24.32.5); however:
Package python3-software-properties is not configured yet.
software-properties-gtk depends on software-properties-common; however:
Package software-properties-common is not configured yet.
dpkg: error processing package software-properties-gtk (--configure):
dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
dpkg:
dependency problems prevent configuration of gnome-software:
gnome-software depends on software-properties-gtk; however:
Package software-properties-gtk is not configured yet.
dpkg: error processing package gnome-software (--configure):
dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
dpkg:
dependency problems prevent configuration of apport:
apport depends on python3-apport (>= 2.20.9-0ubuntu7.3); however:
Package python3-apport is not configured yet.
dpkg: error processing package apport (--configure):
dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
dpkg:
dependency problems prevent configuration of ubuntu-software:
ubuntu-software depends on gnome-software (>= 3.28.1-0ubuntu4.18.04.3);
however:
Package gnome-software is not configured yet.
dpkg: error processing package ubuntu-software (--configure):
dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
dpkg:
dependency problems prevent configuration of gnome-software-plugin-snap:
gnome-software-plugin-snap depends on gnome-software (=
3.28.1-0ubuntu4.18.04.3); however:
Package gnome-software is not configured yet.
dpkg: error processing package gnome-software-plugin-snap (--configure):
dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
dpkg:
dependency problems prevent configuration of apport-gtk:
apport-gtk depends on python3-apport (>= 2.20.9-0ubuntu7.3); however:
Package python3-apport is not configured yet.
apport-gtk depends on apport (>= 0.41); however:
Package apport is not configured yet.
dpkg: error processing package apport-gtk (--configure):
dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
Errors were
encountered while processing:
libglib2.0-dev-bin
libglib2.0-dev:amd64
python3-problem-report
python3-software-properties
software-properties-common
python3-apport
software-properties-gtk
gnome-software
apport
ubuntu-software
gnome-software-plugin-snap
apport-gtk
ProblemType: Package
DistroRelease: Ubuntu 18.04
Package: libglib2.0-dev-bin 2.56.2-0ubuntu0.18.04.1
ProcVersionSignature: Ubuntu 4.15.0-34.37-generic 4.15.18
Uname: Linux 4.15.0-34-generic x86_64
ApportVersion: 2.20.9-0ubuntu7.3
AptOrdering: NULL: ConfigurePending
Architecture: amd64
Date: Fri Sep 21 13:34:18 2018
DpkgTerminalLog:
Setting up libglib2.0-dev-bin (2.56.2-0ubuntu0.18.04.1) ...
E: py3compile:243: Requested versions are not installed
dpkg: error processing package libglib2.0-dev-bin (--configure):
installed libglib2.0-dev-bin package post-installation script subprocess
returned error exit status 3
DuplicateSignature:
package:libglib2.0-dev-bin:2.56.2-0ubuntu0.18.04.1
Setting up libglib2.0-dev-bin (2.56.2-0ubuntu0.18.04.1) ...
E: py3compile:243: Requested versions are not installed
dpkg: error processing package libglib2.0-dev-bin (--configure):
installed libglib2.0-dev-bin package post-installation script subprocess
returned error exit status 3
ErrorMessage: installed libglib2.0-dev-bin package post-installation script
subprocess returned error exit status 3
InstallationDate: Installed on 2016-07-05 (807 days ago)
InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64
(20160420.1)
Python3Details: /usr/bin/python3.6m, Python 3.6.5, python3-minimal,
3.6.5-3ubuntu1
PythonDetails: /usr/bin/python2.7, Python 2.7.15rc1, python-minimal,
2.7.15~rc1-1
RelatedPackageVersions:
dpkg 1.19.0.5ubuntu2
apt 1.6.3ubuntu0.1
SourcePackage: glib2.0
Title: package libglib2.0-dev-bin 2.56.2-0ubuntu0.18.04.1 failed to
install/upgrade: installed libglib2.0-dev-bin package post-installation script
subprocess returned error exit status 3
UpgradeStatus: Upgraded to bionic on 2018-08-19 (32 days ago)
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/glib2.0/+bug/1793733/+subscriptions
--
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help : https://help.launchpad.net/ListHelp
