Hi guys, I am joining this community of frustrated dock users. I am running Linux Mint Sonya with MATE desktop on a P71 uusing the dock with two external monitors with nvidia 384.90 and the discrete graphics pre-selected in the BIOS.
When I started this, the first hing I noticed was that having a monitors.xml would cause the screen to flicker, so I had to run everything without it. Then, after boot, I had to put it back to suspend once before I started working, since after the first suspend it would change the SEQUENCE of the monitors. Afterwards, the sequence would remain. So that worked for a while. After the upgrade to the latest Nvidia driver on October 26th, the sequence was not changed anymore, so that was actually good. This worked for four days, I think. Now, I get the effect mentioned in a post a bit further up: wheneever I try to wake the laptop up from suspend (or hibernate), I just get a flickering and I have to reboot - obviously not what one would want. I also think that XUbuntu is a bit minimalistic, but if it saves me this headache, I might give that a try. This is really annoying! -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to nvidia-graphics-drivers-361 in Ubuntu. https://bugs.launchpad.net/bugs/1615734 Title: Multiple monitors broken Status in nvidia-graphics-drivers-361 package in Ubuntu: Confirmed Status in nvidia-graphics-drivers-367 package in Ubuntu: Confirmed Status in nvidia-graphics-drivers-375 package in Ubuntu: Confirmed Status in nvidia-graphics-drivers-384 package in Ubuntu: New Bug description: I have a Lenovo P50 with Nvidia Optimus (Quadro M1000M), installed with Ubuntu 16.04 and the recommended Nvidia drivers (361.42). I added two external monitors connected to DP sockets in the docking station. I would like to have display shift to those two monitors when the laptop is docked. One monitor has native resolution of 1680x1050 and the other is 1920x1080. The laptop native resolution is 1920x1080. Expected result: laptop monitor shut off, two external monitors running in native resolution, display shared on both monitors (not mirrored). Process: I configured the display using the "Displays" applet in the unity control center. However, pressing "Apply" when changing a specific display setting (such as resolution, location of screen relative to others, turning on/off), results in a long period of darkness, usually followed by display falling back to mirroring of all 3 monitors, using a similar-size screen (either low on all or high on all with the low-res monitor using panning). The applet remains frozen for some time, with the dialog "Is the display ok" open but unresponsive. Later I realized this is because there is another dialog of "Cannot set screen CRTCXXX" hidden under the two above windows, which needs to by ok-ed first. Extra: I also tried setting the display manually with 'xrandr', which lead to a similar result as above - with the "cannot set screen" dialog, and falling back to mirroring. This convinced me that the problem is probably with the nvidia driver and not the higher plumbing. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: nvidia-361 361.42-0ubuntu2 ProcVersionSignature: Ubuntu 4.4.0-34.53-generic 4.4.15 Uname: Linux 4.4.0-34-generic x86_64 NonfreeKernelModules: symap_custom_dkms_x86_64 nvidia_uvm nvidia_modeset nvidia ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 CurrentDesktop: Unity Date: Mon Aug 22 19:14:55 2016 InstallationDate: Installed on 2016-07-17 (36 days ago) InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) SourcePackage: nvidia-graphics-drivers-361 UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-361/+bug/1615734/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : [email protected] Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp

