on the problem machine 192.168.10.7, I used the Printer Properties to send "Print Test Page" to the HL2270DW printer on 192.168.10.3, and captured the printout on the 10.3 machine -- the printout is attached, and unzipped it begins with
%-12345X@PJL @PJL JOB NAME="Brother HL-XXX" @PJL SET RAS1200MODE = OFF @PJL SET RESOLUTION = 600 @PJL SET ECONOMODE = OFF @PJL SET SOURCETRAY = TRAY1 @PJL SET MEDIATYPE = REGULAR @PJL SET ORIENTATION = PORTRAIT @PJL SET PAPER = LETTER @PJL SET PAGEPROTECT = AUTO and when I cupsctl to enable the printer, again, the printer hiccups like it is about to print, but nothing comes out, and if I use lpr on 10.3 the file also does not print. corrupted driver files perhaps? purge and re-install? ** Attachment added: "printout" https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1246543/+attachment/3897978/+files/printout ** Changed in: cups (Ubuntu) Status: Incomplete => New -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to cups in Ubuntu. https://bugs.launchpad.net/bugs/1246543 Title: Ubuntu 13.10 - HL2270DW printer will not print after upgrade Status in “cups” package in Ubuntu: New Bug description: After upgrading to 13.10, I am able to print to one network printer, but not to the other; both are Brother printers, the MFC-j6510DW prints fine, but the "Brother HL2270DW for CUPS" goes through all the motions, it even causes the printer to click once as if it is about to print, but nothing comes out. Other machines on the network, including one that was also upgraded to 13.10, are able to print to this device, and if I print to file, and then use ssh to cat the contents of the PDF to lpr on the printer machine (running 13.04) I can print. But test pages and evince are unable to print directly. The MFC-j6510DW printer is on it's own, connected via wifi, but the HL2270DW is connected to another LAN machine via USB, but this does not appear to bother any other machines on the LAN. In the Cups access.log on the printer host, the logs appear fine: localhost - - [30/Oct/2013:21:04:54 -0400] "POST /printers/HL2270DW HTTP/1.1" 200 306 Create-Job successful-ok localhost - - [30/Oct/2013:21:04:54 -0400] "POST /printers/HL2270DW HTTP/1.1" 200 21751 Send-Document successful-ok localhost - radio [30/Oct/2013:21:05:08 -0400] "POST / HTTP/1.1" 200 186 Renew-Subscription successful-ok localhost - - [30/Oct/2013:21:07:44 -0400] "POST /printers/HL2270DW HTTP/1.1" 200 306 Create-Job successful-ok localhost - - [30/Oct/2013:21:07:45 -0400] "POST /printers/HL2270DW HTTP/1.1" 200 21170 Send-Document successful-ok and on the sending machine, the print queue says "sending" and then the print queue is empty. So all indications are that the document should print, but nothing comes out of the machine. If I use lpr file.pdf on this machine, I still see the same Cups access log entries on the printer host, and the printer still clicks as if to print. I am using hl2270dwlpr-2.1.0-1.i386.deb and cupswrapperHL2270DW-2.0.4-2.i386.deb downloaded from Brother's website, but here again, these drives will produce a PDF file that can be printed from any other machine, and the other 13.10 machine is also using these very same drivers from the same deb files! ProblemType: Bug DistroRelease: Ubuntu 13.10 Package: cups 1.7.0~rc1-0ubuntu5 ProcVersionSignature: Ubuntu 3.11.0-12.19-generic 3.11.3 Uname: Linux 3.11.0-12-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.12.5-0ubuntu2.1 Architecture: amd64 CupsErrorLog: W [30/Oct/2013:07:35:08 -0400] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id 'laser-Gray..' already exists E [30/Oct/2013:07:35:08 -0400] Unable to bind socket for address [v1.::1]:631 - Address already in use. E [30/Oct/2013:07:35:08 -0400] Unable to bind socket for address 127.0.0.1:631 - Address already in use. Date: Wed Oct 30 21:06:30 2013 InstallationDate: Installed on 2012-04-27 (551 days ago) InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Release amd64 (20120425) Lpstat: device for laser: ipp://192.168.10.3:631/printers/HL2270DW device for MFCJ6510DW: dnssd://Brother%20MFC-J6510DW._ipp._tcp.local/ MachineType: ZaReason STRATA MarkForUpload: True Papersize: letter PpdFiles: MFCJ6510DW: Brother MFC-J6510DW CUPS laser: Brother HL2270DW for CUPS ProcEnviron: LANGUAGE=en_CA:en PATH=(custom, no user) XDG_RUNTIME_DIR=<set> LANG=en_CA.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=ab4d27fc-a13d-4bdd-a971-8e647d4c356e ro quiet splash SourcePackage: cups UpgradeStatus: Upgraded to saucy on 2013-10-22 (8 days ago) dmi.bios.date: 08/30/2011 dmi.bios.vendor: INSYDE dmi.bios.version: Strata dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: STRATA dmi.board.vendor: ZaReason dmi.board.version: Base Board Version dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ZaReason dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnINSYDE:bvrStrata:bd08/30/2011:svnZaReason:pnSTRATA:pvrStrata:rvnZaReason:rnSTRATA:rvrBaseBoardVersion:cvnZaReason:ct10:cvrChassisVersion: dmi.product.name: STRATA dmi.product.version: Strata dmi.sys.vendor: ZaReason mtime.conffile..etc.cups.cupsd.conf: 2013-04-25T16:12:58.652761 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1246543/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
