You have been subscribed to a public bug:
I posted this on several forums (Ubuntu, XBMC, OpenELEC, and Intel) but
no one had an answer. I'm hoping someone here will be able to help me.
I built a PC using an Intel motherboard, my specs are….
Intel DH77DF Motherboard
Intel G1620 Celeron
2 GB Corsair DDR3-1333
1 TB Western Digital hard drive
My TV is a Samsung LN40C630
This box is running Ubuntu 13.04 on it (but I also tested running
OpenELEC 3.2.1 32 bit) on it. This computer is connected to my TV
through an HDMI cable (HDMI port 2 of my TV). Also, my Tivo it
connected to my TV through an HDMI cable (HDMI port 1 of my TV).
THE PROBLEM
When I turn on my HTPC I sometimes leave it on and switch my TV source to my
Tivo so I can watch TV for a while. The problem is that after I’m done watching
my Tivo, when I switch back to my HTPC (HDMI port 2) the screen goes black and
then shows static. This pattern of static and then black repeats every three
seconds or so. It looks like the TV is trying to connect to the HTPC but that
it can’t. This does not always happen, it happens maybe 20% of the time. I can
almost always fix this by switching the TV back to my Tivo (HDMI port 1) and
then back to my HTPC (HDMI port 2) AGAIN. However, this does not always work.
Another tactic is to unplug the HDMI cable coming from the HTPC and plug it
back in. None of these are real solutions though. I did some troubleshooting
and there is what I found…
TROUBLESHOOTING
It is not the HDMI cable or HDMI ports on the TV
I plugged my HTPC into the HDMI port normally used by the Tivo (HDMI port 1)
using the Tivo HDMI cable. Then I plugged the Tivo into HDMI port 2 using the
HTPC HDMI cable. The same problem occurred, the HTPC would periodically show
repeating patterns of static and black. I also have a PS3 plugged into HDMI
port 3 of the TV. Swapping the cables and ports between the PS3 and the HTPC
still results in the HTPC displaying repeating patterns of black and static.
I’ve owned the Tivo and PS3 for several years now, I switch back and forth
between them all the time and I have never seen this problem with either. It is
clearly not the cables or the HDMI ports on my TV.
The HDMI port on the HTPC motherboard is not the problem
I have a DVI to HDMI adapter. The motherboard has a DVI port. I connected the
DVI to HDMI adapter to my motherboards DVI connector connected my HTPC to the
TV using an HDMI cable. So now the picture is coming out of the DVI connector
on the HTPC and going through the DVI to HDMI adapter and then to the HDMI
cable that is connected to the TV. I tested all HDMI ports and the error still
occurs. So now I know that even the source leaving the HTPC through the DVI
output can trigger this behavior. In addition, I was at my local electronics
store and picked us an Asrock H77M-ITX motherboard. The error occurs on this
motherboard too. It is clearly not an issue with the motherboard.
Adjusting sleep timeout, screensaver settings, XBMC skins does not fix the issue
I tried changing the skin on XBMC, turning off screensavers and screen timeout
on OpenELEC and Ubuntu. The same error still occurs.
TV and Motherboard BIOS are probably not the issue
Changing the TV BIOS is not an option because my TV is on the latest firmware.
I cannot downgrade because there is no lesser version of firmware available on
the Samsung site for this TV. The motherboard BIOS is not the issue. I went to
the Intel site and flashed the latest version of their BIOS (version 110) and
the issue still occurs. Then I downgraded to the oldest version of their BIOS
(version 69) and the issue still occurs. Oddly enough, when I load up Intel
VisualBIOS the issue NEVER OCCURS. I can switch back and forth between the Tivo
and the HTPC without any problems when displaying the VisualBIOS. However, the
moment I switch to a Linux distro the error occurs.
Issue only occurs when running a Linux OS.
I tried various builds of Ubuntu 13.04 and 12.04. I also tried various build of
OpenELEC, from 3.2.1 to 1.0.2. All of these OS’s showed this error. I installed
Windows 7 Home Edition and everything worked perfectly. I was never able to
trigger this error using Windows on either the Intel of Asrock motherboards.
The error is HDMI/DVI related, VGA works fine
I have a DVI to VGA adapter and my TV has an VGA port. I connected my HTPC to
my TV’s VGA port using a VGA cable and I did not see this patterns of
black/static. No matter how many times I switched between my Tivo and HTPC I
could not trigger it, regardless of whether I was running Windows or a Linux
distro.
SUMMARY
So to recap…. The HDMI cables are fine. The HDMI ports on my TV and Motherboard
are fine. The error does not occur when I’m running the motherboard’s Visual
BIOS or Windows. The error occurs when I’m running a Linux distro. The error is
HDMI/DVI related. I'm guessing this in an xserver or Intel driver issue. Help!
** Affects: xserver-xorg-video-intel (Ubuntu)
Importance: Undecided
Status: New
** Tags: bot-comment hdmi intel
--
cannot connect to HDMI port on my Ubuntu PC when switching sources on my TV
https://bugs.launchpad.net/bugs/1236056
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xserver-xorg-video-intel in Ubuntu.
--
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help : https://help.launchpad.net/ListHelp
