We are closing this bug report because it lacks the information we need
to investigate the problem, as described in the previous comments.
Please reopen it if you can give us the missing information, and don't
hesitate to submit bug reports in the future. To reopen the bug report
you can click on the current status, under the Status column, and change
the Status back to "New". Thanks again!
** Changed in: gnome-system-tools (Ubuntu)
Status: Incomplete => Expired
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to gnome-system-tools in Ubuntu.
https://bugs.launchpad.net/bugs/148931
Title:
[gutsy] network-admin and profile
Status in “gnome-system-tools” package in Ubuntu:
Expired
Bug description:
Gutsy with actual repo packages upgrade...
I use it at HP NX7300
I make 2 profiles in network-admin
The first - Home
wifi - 10:00.0 Network controller: Broadcom Corporation BCM94311MCG wlan
mini-PCI (rev 01)
The roaming mode enabled
ethernet - 02:0e.0 Ethernet controller: Broadcom Corporation BCM4401-B0
100Base-TX (rev 02)
The roaming mode enabled
modem -- disabled
The second - Work
wifi - 10:00.0 Network controller: Broadcom Corporation BCM94311MCG wlan
mini-PCI (rev 01)
The roaming mode enabled
ethernet - 02:0e.0 Ethernet controller: Broadcom Corporation BCM4401-B0
100Base-TX (rev 02)
Static IP configuration
When I use profile Home -- any problems...
When I change profile to Work -- system partialy frozen, i can`t open
terminal but tail logs in terminal which I open before change profiles
work, keys not work, but synaptics touchpad work. I cannot open a
network-admin, but firefox start !
When i plug off a ethernet cable the system logs this.
When I click power button the system try logout user but any reactions. I
must power off notebook and restart the machine.
After restart the Work profile works normally. I can join to wifi network and
use wired connections with static IP.
When I change to profile Home it`s still work normally. But when i change to
Work the problem return.
cat /var/log/syslog
Oct 4 12:48:21 hornet kernel: [ 2391.628000] b44: eth0: Link is up at 100
Mbps, full duplex.
Oct 4 12:48:21 hornet kernel: [ 2391.628000] b44: eth0: Flow control is off
for TX and off for RX.
Oct 4 12:48:21 hornet kernel: [ 2391.628000] ADDRCONF(NETDEV_CHANGE): eth0:
link becomes ready
Oct 4 12:48:23 hornet avahi-daemon[5229]: Registering new address record for
fe80::217:a4ff:fedc:bdab on eth0.*.
Oct 4 12:48:26 hornet NetworkManager: <info> User Switch:
/org/freedesktop/NetworkManager/Devices/eth0
Oct 4 12:48:26 hornet NetworkManager: <info> Deactivating device eth0.
Oct 4 12:48:26 hornet avahi-daemon[5229]: Withdrawing address record for
fe80::217:a4ff:fedc:bdab on eth0.
Oct 4 12:48:26 hornet NetworkManager: <info> Device eth0 activation
scheduled...
Oct 4 12:48:26 hornet NetworkManager: <info> Deactivating device eth1.
Oct 4 12:48:26 hornet dhclient: There is already a pid file
/var/run/dhclient.eth1.pid with pid 6315
Oct 4 12:48:26 hornet dhclient: killed old client process, removed PID file
Oct 4 12:48:26 hornet dhclient: DHCPRELEASE on eth1 to 192.168.2.1 port 67
Oct 4 12:48:26 hornet avahi-daemon[5229]: Withdrawing address record for
192.168.2.104 on eth1.
Oct 4 12:48:26 hornet avahi-daemon[5229]: Leaving mDNS multicast group on
interface eth1.IPv4 with address 192.168.2.104.
Oct 4 12:48:26 hornet avahi-daemon[5229]: Interface eth1.IPv4 no longer
relevant for mDNS.
Oct 4 12:48:27 hornet NetworkManager: <info> SUP: sending command
'DISABLE_NETWORK 0'
Oct 4 12:48:27 hornet NetworkManager: <info> SUP: response was 'OK'
Oct 4 12:48:27 hornet NetworkManager: <info> SUP: sending command 'AP_SCAN
0'
Oct 4 12:48:27 hornet NetworkManager: <info> SUP: response was 'OK'
Oct 4 12:48:27 hornet NetworkManager: <info> SUP: sending command
'TERMINATE'
Oct 4 12:48:27 hornet NetworkManager: <info> SUP: response was 'OK'
Oct 4 12:48:27 hornet avahi-daemon[5229]: Withdrawing address record for
fe80::21a:73ff:fe4f:3051 on eth1.
Oct 4 12:48:27 hornet NetworkManager: <info> Activation (eth0) started...
Oct 4 12:48:27 hornet NetworkManager: <info> Activation (eth0) Stage 1 of 5
(Device Prepare) scheduled...
Oct 4 12:48:27 hornet NetworkManager: <info> Activation (eth0) Stage 1 of 5
(Device Prepare) started...
Oct 4 12:48:27 hornet NetworkManager: <info> Activation (eth0) Stage 2 of 5
(Device Configure) scheduled...
Oct 4 12:48:27 hornet NetworkManager: <info> Activation (eth0) Stage 1 of 5
(Device Prepare) complete.
Oct 4 12:48:27 hornet NetworkManager: <info> Activation (eth0) Stage 2 of 5
(Device Configure) starting...
Oct 4 12:48:27 hornet NetworkManager: <info> Activation (eth0) Stage 2 of 5
(Device Configure) successful.
Oct 4 12:48:27 hornet NetworkManager: <info> Activation (eth0) Stage 3 of 5
(IP Configure Start) scheduled.
Oct 4 12:48:27 hornet NetworkManager: <info> Activation (eth0) Stage 2 of 5
(Device Configure) complete.
Oct 4 12:48:27 hornet NetworkManager: <info> Activation (eth0) Stage 3 of 5
(IP Configure Start) started...
Oct 4 12:48:28 hornet NetworkManager: <info> Activation (eth0) Beginning
DHCP transaction.
Oct 4 12:48:28 hornet dhclient: There is already a pid file
/var/run/dhclient.eth0.pid with pid 134519120
Oct 4 12:48:28 hornet NetworkManager: <info> Activation (eth0) Stage 3 of 5
(IP Configure Start) complete.
Oct 4 12:48:28 hornet NetworkManager: <info> DHCP daemon state is now 12
(successfully started) for interface eth0
Oct 4 12:48:29 hornet NetworkManager: <info> DHCP daemon state is now 1
(starting) for interface eth0
Oct 4 12:48:30 hornet NetworkManager: <info> Old device 'eth0' activating,
won't change.
Oct 4 12:48:31 hornet dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port
67 interval 7
Oct 4 12:48:38 hornet dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port
67 interval 12
Oct 4 12:48:50 hornet dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port
67 interval 11
Oct 4 12:48:50 hornet kernel: [ 2420.132000] ADDRCONF(NETDEV_UP): eth1: link
is not ready
Oct 4 12:48:53 hornet NetworkManager: <info> /etc/network/interface
changed: rebuilding the device list.
Oct 4 12:48:53 hornet NetworkManager: <WARN> ifparser_init(): Error: Can't
parse inet line 'inet'
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Oct 4 12:48:53 hornet NetworkManager: <info> Removing wireless (802.11)
device 'eth1'.
Oct 4 12:48:53 hornet NetworkManager: <info> Deactivating device eth1.
Oct 4 12:48:53 hornet avahi-daemon[5229]: Joining mDNS multicast group on
interface eth0.IPv4 with address xxx.xxx.xxx.xxx.
Oct 4 12:48:53 hornet NetworkManager: <info> Removing wired Ethernet
(802.3) device 'eth0'.
Oct 4 12:48:53 hornet NetworkManager: <info> Deactivating device eth0.
Oct 4 12:48:53 hornet NetworkManager: <info> Activation (eth0):
cancelling...
Oct 4 12:48:53 hornet NetworkManager: <info> Activation (eth0) cancellation
handler scheduled...
Oct 4 12:48:53 hornet NetworkManager: <info> Activation (eth0): waiting for
device to cancel activation.
Oct 4 12:48:53 hornet dhclient: There is already a pid file
/var/run/dhclient.eth0.pid with pid 6497
Oct 4 12:48:53 hornet dhclient: killed old client process, removed PID file
Oct 4 12:48:53 hornet avahi-daemon[5229]: New relevant interface eth0.IPv4
for mDNS.
Oct 4 12:48:53 hornet avahi-daemon[5229]: Registering new address record for
xxx.xxx.xxx.xxx on eth0.IPv4.
Oct 4 12:48:53 hornet avahi-daemon[5229]: Withdrawing address record for
xxx.xxx.xxx.xxx on eth0.
Oct 4 12:48:53 hornet avahi-daemon[5229]: Leaving mDNS multicast group on
interface eth0.IPv4 with address xxx.xxx.xxx.xxx
Oct 4 12:48:53 hornet avahi-daemon[5229]: Interface eth0.IPv4 no longer
relevant for mDNS.
Oct 4 12:48:53 hornet avahi-daemon[5229]: Joining mDNS multicast group on
interface eth0.IPv4 with address xxx.xxx.xxx.xxx.
Oct 4 12:48:53 hornet avahi-daemon[5229]: New relevant interface eth0.IPv4
for mDNS.
Oct 4 12:48:53 hornet avahi-daemon[5229]: Registering new address record for
xxx.xxx.xxx.xxx on eth0.IPv4.
Oct 4 12:48:53 hornet dhclient: DHCPRELEASE on eth0 to 192.168.0.1 port 67
Oct 4 12:48:53 hornet avahi-daemon[5229]: Withdrawing address record for
xxx.xxx.xxx.xxx on eth0.
Oct 4 12:48:53 hornet avahi-daemon[5229]: Leaving mDNS multicast group on
interface eth0.IPv4 with address xxx.xxx.xxx.xxx.
Oct 4 12:48:53 hornet avahi-daemon[5229]: Interface eth0.IPv4 no longer
relevant for mDNS.
Oct 4 12:48:54 hornet ntpdate[6600]: sendto(91.189.94.145): Network is
unreachable
Oct 4 12:48:54 hornet NetworkManager: <info> Activation (eth0): waiting for
device to cancel activation.
Oct 4 12:48:54 hornet NetworkManager: <info> Activation (eth0) cancellation
handled.
Oct 4 12:48:54 hornet NetworkManager: <info> Activation (eth0): cancelled.
Oct 4 12:48:54 hornet NetworkManager: <info> Recreating the device list.
Oct 4 12:48:55 hornet kernel: [ 2425.036000] ADDRCONF(NETDEV_UP): eth1: link
is not ready
Oct 4 12:48:55 hornet ntpdate[6600]: sendto(91.189.94.145): Network is
unreachable
Oct 4 12:48:55 hornet NetworkManager: <info> eth1: Device is
fully-supported using driver 'bcm43xx'.
Oct 4 12:48:55 hornet NetworkManager: <info> nm_device_init(): waiting for
device's worker thread to start
Oct 4 12:48:55 hornet NetworkManager: <info> nm_device_init(): device's
worker thread started, continuing.
Oct 4 12:48:55 hornet NetworkManager: <info> Now managing wireless (802.11)
device 'eth1'.
Oct 4 12:48:55 hornet NetworkManager: <info> Deactivating device eth1.
Oct 4 12:48:55 hornet kernel: [ 2425.136000] SoftMAC: Open Authentication
completed with 00:80:48:3d:5c:a7
Oct 4 12:48:55 hornet kernel: [ 2425.136000] ADDRCONF(NETDEV_UP): eth0: link
is not ready
Oct 4 12:48:55 hornet NetworkManager: <info> Device list recreated
successfully.
Oct 4 12:48:55 hornet NetworkManager: <info> /etc/network/interface
changed: rebuilding the device list.
Oct 4 12:48:55 hornet NetworkManager: <info> Removing wireless (802.11)
device 'eth1'.
Oct 4 12:48:55 hornet NetworkManager: <info> Deactivating device eth1.
Oct 4 12:48:56 hornet ntpdate[6600]: sendto(91.189.94.145): Network is
unreachable
Oct 4 12:48:57 hornet ntpdate[6600]: sendto(91.189.94.145): Network is
unreachable
Oct 4 12:48:57 hornet ntpdate[6600]: no server suitable for synchronization
found
I plug off ethernet cable and plug on:
Oct 4 12:48:58 hornet kernel: [ 2428.136000] b44: eth0: Link is up at 100
Mbps, full duplex.
Oct 4 12:48:58 hornet kernel: [ 2428.136000] b44: eth0: Flow control is off
for TX and off for RX.
Oct 4 12:49:24 hornet kernel: [ 2454.152000] b44: eth0: Link is down.
Oct 4 12:49:31 hornet kernel: [ 2461.156000] b44: eth0: Link is up at 100
Mbps, full duplex.
Oct 4 12:49:31 hornet kernel: [ 2461.156000] b44: eth0: Flow control is off
for TX and off for RX.
When click power button:
Oct 4 12:50:18 hornet gnome-power-manager: (vdr) Interaktywne wylogowanie
GNOME ponieważ klawisz zasilania został wciśnięty
"Interactive logout GNOME because power button was press"
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gnome-system-tools/+bug/148931/+subscriptions
--
Mailing list: https://launchpad.net/~desktop-packages
Post to : [email protected]
Unsubscribe : https://launchpad.net/~desktop-packages
More help : https://help.launchpad.net/ListHelp
