Public bug reported:
Binary package hint: nautilus-cd-burner
It seems that feisty doesn't work with external CD writers anymore. I
have tried two external USB CD writers: 1. TEAC DW-224E-B 1.6A; 2.
Samsung CD-RW/DVD Drive SM-348 + USB -> IDE adapter. Those same CD
writers work well with dapper and edgy.
Steps to reproduce:
1. Insert a blank CD-R or a CD-RW into the external cd writer.
2. Right click on a ISO image, and then click "Write to disc...". Click OK.
3. A window pops up immediately, asking me to insert a blank disc. See attached
screenshot.
4. If I click OK, the same window will pop up again...
cdrecord(wodim) commandline also fails to work with external CD writers.
See the following command outputs.
Cdrecord fails to blank a CD-RW:
---------------------------------------------------------------------------------
[EMAIL PROTECTED]:~/feisty$ sudo cdrecord dev=9,0,0 blank=fast
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'TEAC '
Identification : 'DW-224E-B '
Revision : '1.6A'
Device seems to be: Generic mmc2 DVD-ROM.
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-2 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R
Speed set to 4234 KB/s
Starting to write CD/DVD at speed 24.0 in real BLANK mode for single session.
Last chance to quit, starting real write 0 seconds. Operation starts.
---------------------------------------------------------------------------------
It exits as soon as the blanking operation starts.
Cdrecord fails to write to a CD-RW.
---------------------------------------------------------------------------------
[EMAIL PROTECTED]:~/feisty$ sudo cdrecord dev=9,0,0 ubuntu-7.04-desktop-i386.iso
wodim: No write mode specified.
wodim: Asuming -tao mode.
wodim: Future versions of wodim may have different drive dependent defaults.
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'TEAC '
Identification : 'DW-224E-B '
Revision : '1.6A'
Device seems to be: Generic mmc2 DVD-ROM.
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-2 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R
Speed set to 4234 KB/s
Starting to write CD/DVD at speed 24.0 in real TAO mode for single session.
Last chance to quit, starting real write 0 seconds. Operation starts.
Errno: 12 (Cannot allocate memory), write_g1 scsi sendcmd: no error
CDB: 2A 00 00 00 00 00 00 00 1F 00
status: 0x0 (GOOD STATUS)
cmd finished after 0.000s timeout 40s
write track data: error after 0 bytes
wodim: A write error occured.
wodim: Please properly read the error message above.
Errno: 5 (Input/output error), close track/session scsi sendcmd: no error
CDB: 5B 00 02 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 72 04 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x72 Qual 0x04 (empty or partially written reserved track) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.001s timeout 480s
cmd finished after 0.001s timeout 480s
wodim: Cannot fixate disk.
---------------------------------------------------------------------------------
cdrecord fails to write to a blank CD-R:
---------------------------------------------------------------------------------
[EMAIL PROTECTED]:~/feisty$ sudo cdrecord dev=9,0,0
ubuntu-7.04-desktop-i386.iso
Password:
wodim: No write mode specified.
wodim: Asuming -tao mode.
wodim: Future versions of wodim may have different drive dependent defaults.
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'TEAC '
Identification : 'DW-224E-B '
Revision : '1.6A'
Device seems to be: Generic mmc2 DVD-ROM.
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-2 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R
Speed set to 4234 KB/s
Starting to write CD/DVD at speed 24.0 in real TAO mode for single session.
Last chance to quit, starting real write 0 seconds. Operation starts.
Errno: 12 (Cannot allocate memory), write_g1 scsi sendcmd: no error
CDB: 2A 00 00 00 00 00 00 00 1F 00
status: 0x0 (GOOD STATUS)
cmd finished after 0.000s timeout 40s
write track data: error after 0 bytes
wodim: A write error occured.
wodim: Please properly read the error message above.
Errno: 5 (Input/output error), close track/session scsi sendcmd: no error
CDB: 5B 00 02 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 72 04 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x72 Qual 0x04 (empty or partially written reserved track) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.001s timeout 480s
cmd finished after 0.001s timeout 480s
wodim: Cannot fixate disk.
---------------------------------------------------------------------------------
** Affects: nautilus-cd-burner (Ubuntu)
Importance: Undecided
Status: Unconfirmed
--
feisty doesn't work with external CD writers anymore
https://bugs.launchpad.net/bugs/109211
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is a bug contact for nautilus-cd-burner in ubuntu.
--
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs
