*** This bug is a duplicate of bug 42970 *** i also note that during the boot sequence
the time for resolving the item "loading harware drivers" is longer than before on my two PC ( now 1mn 35 sec on my 2GhZ PC) probabely x2 or 3 grants for your help dominique France /var/log/dmesg -------------------------------------------------------------------------------------------------------- [4294667.296000] Linux version 2.6.15-22-386 ([EMAIL PROTECTED]) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Sun May 7 15:49:09 UTC 2006 [4294667.296000] BIOS-provided physical RAM map: [4294667.296000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [4294667.296000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [4294667.296000] BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved) [4294667.296000] BIOS-e820: 0000000000100000 - 000000001ff70000 (usable) [4294667.296000] BIOS-e820: 000000001ff70000 - 000000001ff7c000 (ACPI data) [4294667.296000] BIOS-e820: 000000001ff7c000 - 000000001ff80000 (ACPI NVS) [4294667.296000] BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved) [4294667.296000] BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved) [4294667.296000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [4294667.296000] 0MB HIGHMEM available. [4294667.296000] 511MB LOWMEM available. [4294667.296000] On node 0 totalpages: 130928 [4294667.296000] DMA zone: 4096 pages, LIFO batch:0 [4294667.296000] DMA32 zone: 0 pages, LIFO batch:0 [4294667.296000] Normal zone: 126832 pages, LIFO batch:31 [4294667.296000] HighMem zone: 0 pages, LIFO batch:0 [4294667.296000] DMI present. [4294667.296000] ACPI: RSDP (v000 ACER ) @ 0x000f5e80 [4294667.296000] ACPI: RSDT (v001 ACER RSDT 0x20020930 LTP 0x00000000) @ 0x1ff75a7b [4294667.296000] ACPI: FADT (v001 ACER IBIS 0x20020930 PTL 0x0000001e) @ 0x1ff7bf64 [4294667.296000] ACPI: BOOT (v001 ACER IBIS 0x20020930 LTP 0x00000001) @ 0x1ff7bfd8 [4294667.296000] ACPI: DSDT (v001 ACER IBIS 0x20020930 MSFT 0x0100000e) @ 0x00000000 [4294667.296000] ACPI: PM-Timer IO Port: 0x1008 [4294667.296000] Allocating PCI resources starting at 30000000 (gap: 20000000:dfb80000) [4294667.296000] Built 1 zonelists [4294667.296000] Kernel command line: root=/dev/hda1 ro quiet splash [4294667.296000] Local APIC disabled by BIOS (or by default) -- you can enable it with "lapic" [4294667.296000] mapped APIC to ffffd000 (01401000) [4294667.296000] Initializing CPU#0 [4294667.296000] PID hash table entries: 2048 (order: 11, 32768 bytes) [4294667.296000] Detected 2193.877 MHz processor. [4294667.296000] Using pmtmr for high-res timesource [4294667.296000] Console: colour VGA+ 80x25 [4294669.349000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [4294669.350000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [4294669.364000] Memory: 508468k/523712k available (1975k kernel code, 14596k reserved, 607k data, 288k init, 0k highmem) [4294669.364000] Checking if this processor honours the WP bit even in supervisor mode... Ok. [4294669.424000] Calibrating delay using timer specific routine.. 4388.76 BogoMIPS (lpj=2194383) [4294669.424000] Security Framework v1.0.0 initialized [4294669.424000] SELinux: Disabled at boot. [4294669.424000] Mount-cache hash table entries: 512 [4294669.424000] CPU: After generic identify, caps: bfebf9ff 00000000 00000000 00000000 00000400 00000000 00000000 [4294669.424000] CPU: After vendor identify, caps: bfebf9ff 00000000 00000000 00000000 00000400 00000000 00000000 [4294669.424000] CPU: Trace cache: 12K uops, L1 D cache: 8K [4294669.424000] CPU: L2 cache: 512K [4294669.424000] CPU: After all inits, caps: bfebf9ff 00000000 00000000 00000080 00000400 00000000 00000000 [4294669.424000] mtrr: v2.0 (20020519) [4294669.424000] CPU: Intel Mobile Intel(R) Pentium(R) 4 - M CPU 2.20GHz stepping 07 [4294669.424000] Enabling fast FPU save and restore... done. [4294669.424000] Enabling unmasked SIMD FPU exception support... done. [4294669.424000] Checking 'hlt' instruction... OK. [4294669.428000] checking if image is initramfs... it is [4294670.032000] Freeing initrd memory: 6408k freed [4294670.046000] ACPI: Looking for DSDT ... not found! [4294670.048000] ACPI: setting ELCR to 0200 (from 0420) [4294670.058000] NET: Registered protocol family 16 [4294670.058000] EISA bus registered [4294670.058000] ACPI: bus type pci registered [4294670.059000] PCI: PCI BIOS revision 2.10 entry at 0xfd731, last bus=2 [4294670.059000] PCI: Using configuration type 1 [4294670.059000] ACPI: Subsystem revision 20051216 [4294670.063000] ACPI: Interpreter enabled [4294670.063000] ACPI: Using PIC for interrupt routing [4294670.063000] ACPI: PCI Root Bridge [PCI0] (0000:00) [4294670.063000] PCI: Probing PCI hardware (bus 00) [4294670.067000] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO [4294670.067000] PCI quirk: region 1180-11bf claimed by ICH4 GPIO [4294670.067000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 [4294670.068000] Boot video device is 0000:01:00.0 [4294670.068000] PCI: Transparent bridge - 0000:00:1e.0 [4294670.068000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [4294670.070000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [4294670.071000] ACPI: PCI Interrupt Link [LNKA] (IRQs *10) [4294670.071000] ACPI: PCI Interrupt Link [LNKB] (IRQs *10) [4294670.072000] ACPI: PCI Interrupt Link [LNKC] (IRQs *10) [4294670.072000] ACPI: PCI Interrupt Link [LNKD] (IRQs *5) [4294670.072000] ACPI: PCI Interrupt Link [LNKE] (IRQs 10) *0 [4294670.072000] ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *0, disabled. [4294670.073000] ACPI: PCI Interrupt Link [LNKG] (IRQs 10) *0, disabled. [4294670.073000] ACPI: PCI Interrupt Link [LNKH] (IRQs 10) *0, disabled. [4294670.076000] ACPI: Embedded Controller [EC0] (gpe 29) interrupt mode. [4294670.076000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT] [4294670.080000] ACPI: Power Resource [PFN0] (off) [4294670.080000] ACPI: Power Resource [PFN1] (off) [4294670.080000] Linux Plug and Play Support v0.97 (c) Adam Belay [4294670.080000] pnp: PnP ACPI init [4294670.086000] pnp: PnP ACPI: found 11 devices [4294670.086000] PnPBIOS: Disabled by ACPI PNP [4294670.086000] PCI: Using ACPI for IRQ routing [4294670.086000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [4294670.093000] PCI: Bridge: 0000:00:01.0 [4294670.093000] IO window: 3000-3fff [4294670.093000] MEM window: e8100000-e81fffff [4294670.093000] PREFETCH window: f0000000-f7ffffff [4294670.093000] PCI: Bus 3, cardbus bridge: 0000:02:06.0 [4294670.093000] IO window: 00004000-000040ff [4294670.093000] IO window: 00004400-000044ff [4294670.093000] PREFETCH window: 30000000-31ffffff [4294670.093000] MEM window: 36000000-37ffffff [4294670.093000] PCI: Bus 7, cardbus bridge: 0000:02:06.1 [4294670.093000] IO window: 00004800-000048ff [4294670.093000] IO window: 00004c00-00004cff [4294670.093000] PREFETCH window: 32000000-33ffffff [4294670.093000] MEM window: 38000000-39ffffff [4294670.093000] PCI: Bridge: 0000:00:1e.0 [4294670.093000] IO window: 4000-5fff [4294670.093000] MEM window: e8200000-e87fffff [4294670.093000] PREFETCH window: 30000000-34ffffff [4294670.093000] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [4294670.093000] **** SET: Misaligned resource pointer: dfe706c2 Type 07 Len 0 [4294670.094000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 [4294670.094000] PCI: setting IRQ 10 as level-triggered [4294670.094000] ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 [4294670.094000] PCI: Enabling device 0000:02:06.1 (0104 -> 0107) [4294670.094000] ACPI: PCI Interrupt 0000:02:06.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 [4294670.094000] Simple Boot Flag at 0x36 set to 0x1 [4294670.094000] audit: initializing netlink socket (disabled) [4294670.094000] audit(1147074114.093:1): initialized [4294670.094000] VFS: Disk quotas dquot_6.5.1 [4294670.094000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [4294670.094000] Initializing Cryptographic API [4294670.094000] io scheduler noop registered [4294670.094000] io scheduler anticipatory registered [4294670.094000] io scheduler deadline registered [4294670.094000] io scheduler cfq registered [4294670.095000] isapnp: Scanning for PnP cards... [4294670.452000] isapnp: No Plug & Play device found [4294670.469000] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOU2] at 0x60,0x64 irq 1,12 [4294670.474000] serio: i8042 AUX port at 0x60,0x64 irq 12 [4294670.475000] serio: i8042 KBD port at 0x60,0x64 irq 1 [4294670.475000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled [4294670.475000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [4294670.475000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A [4294670.477000] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [4294670.477000] **** SET: Misaligned resource pointer: dfc442c2 Type 07 Len 0 [4294670.478000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 [4294670.478000] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 [4294670.478000] ACPI: PCI interrupt for device 0000:00:1f.6 disabled [4294670.478000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [4294670.478000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [4294670.478000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [4294670.478000] mice: PS/2 mouse device common for all mice [4294670.479000] EISA: Probing bus 0 at eisa.0 [4294670.479000] Cannot allocate resource for EISA slot 1 [4294670.479000] Cannot allocate resource for EISA slot 2 [4294670.479000] Cannot allocate resource for EISA slot 3 [4294670.479000] Cannot allocate resource for EISA slot 4 [4294670.479000] Cannot allocate resource for EISA slot 5 [4294670.479000] EISA: Detected 0 cards. [4294670.479000] NET: Registered protocol family 2 [4294670.488000] IP route cache hash table entries: 8192 (order: 3, 32768 bytes) [4294670.488000] TCP established hash table entries: 32768 (order: 5, 131072 bytes) [4294670.488000] TCP bind hash table entries: 32768 (order: 5, 131072 bytes) [4294670.488000] TCP: Hash tables configured (established 32768 bind 32768) [4294670.488000] TCP reno registered [4294670.488000] TCP bic registered [4294670.488000] NET: Registered protocol family 1 [4294670.488000] NET: Registered protocol family 8 [4294670.488000] NET: Registered protocol family 20 [4294670.488000] Using IPI Shortcut mode [4294670.488000] ACPI wakeup devices: [4294670.488000] MDM0 HUB GLAN USB1 USB2 USB1 [4294670.488000] ACPI: (supports S0 S3 S4 S5) [4294670.488000] Freeing unused kernel memory: 288k freed [4294670.512000] input: AT Translated Set 2 keyboard as /class/input/input0 [4294670.565000] vga16fb: initializing [4294670.565000] vga16fb: mapped to 0xc00a0000 [4294670.707000] Console: switching to colour frame buffer device 80x25 [4294670.707000] fb0: VGA16 VGA frame buffer device [4294671.877000] Capability LSM initialized [4294671.913000] ACPI: Fan [FAN0] (off) [4294671.913000] ACPI: Fan [FAN1] (off) [4294671.918000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [4294671.920000] ACPI: Thermal Zone [THRM] (57 C) [4294672.556000] ICH3M: IDE controller at PCI slot 0000:00:1f.1 [4294672.556000] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) [4294672.556000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 [4294672.556000] ICH3M: chipset revision 2 [4294672.556000] ICH3M: not 100% native mode: will probe irqs later [4294672.556000] ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio [4294672.556000] ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio [4294672.556000] Probing IDE interface ide0... [4294672.820000] hda: TOSHIBA MK4032GAX, ATA DISK drive [4294673.432000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [4294673.457000] Probing IDE interface ide1... [4294674.129000] hdc: QSI CD-RW/DVD-ROM SBW-242, ATAPI CD/DVD-ROM drive [4294674.741000] ide1 at 0x170-0x177,0x376 on irq 15 [4294674.749000] hda: max request size: 1024KiB [4294674.759000] hda: 78140160 sectors (40007 MB), CHS=16383/255/63, UDMA(100) [4294674.759000] hda: cache flushes supported [4294674.759000] hda: hda1 hda2 < hda5 hda6 hda7 hda8 > [4294674.849000] hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) [4294674.849000] Uniform CD-ROM driver Revision: 3.20 [4294675.130000] usbcore: registered new driver usbfs [4294675.131000] usbcore: registered new driver hub [4294675.132000] USB Universal Host Controller Interface driver v2.3 [4294675.133000] PCI: Enabling device 0000:00:1d.0 (0004 -> 0005) [4294675.133000] **** SET: Misaligned resource pointer: dfb27602 Type 07 Len 0 [4294675.133000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 [4294675.133000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 [4294675.133000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [4294675.133000] uhci_hcd 0000:00:1d.0: UHCI Host Controller [4294675.134000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [4294675.134000] uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001800 [4294675.134000] hub 1-0:1.0: USB hub found [4294675.134000] hub 1-0:1.0: 2 ports detected [4294675.235000] PCI: Enabling device 0000:00:1d.1 (0000 -> 0001) [4294675.235000] **** SET: Misaligned resource pointer: dfb27302 Type 07 Len 0 [4294675.235000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5 [4294675.235000] PCI: setting IRQ 5 as level-triggered [4294675.235000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5 [4294675.235000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [4294675.235000] uhci_hcd 0000:00:1d.1: UHCI Host Controller [4294675.235000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [4294675.235000] uhci_hcd 0000:00:1d.1: irq 5, io base 0x00001820 [4294675.235000] hub 2-0:1.0: USB hub found [4294675.235000] hub 2-0:1.0: 2 ports detected [4294675.336000] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 [4294675.336000] uhci_hcd 0000:02:09.0: UHCI Host Controller [4294675.336000] uhci_hcd 0000:02:09.0: new USB bus registered, assigned bus number 3 [4294675.336000] uhci_hcd 0000:02:09.0: irq 10, io base 0x00005000 [4294675.336000] hub 3-0:1.0: USB hub found [4294675.336000] hub 3-0:1.0: 2 ports detected [4294675.437000] ACPI: PCI Interrupt 0000:02:09.1[B] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 [4294675.437000] uhci_hcd 0000:02:09.1: UHCI Host Controller [4294675.437000] uhci_hcd 0000:02:09.1: new USB bus registered, assigned bus number 4 [4294675.437000] uhci_hcd 0000:02:09.1: irq 10, io base 0x00005020 [4294675.437000] hub 4-0:1.0: USB hub found [4294675.437000] hub 4-0:1.0: 2 ports detected [4294675.541000] ACPI: PCI Interrupt 0000:02:09.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 [4294675.541000] ehci_hcd 0000:02:09.2: EHCI Host Controller [4294675.541000] ehci_hcd 0000:02:09.2: new USB bus registered, assigned bus number 5 [4294675.541000] ehci_hcd 0000:02:09.2: irq 10, io mem 0xe8208800 [4294675.541000] ehci_hcd 0000:02:09.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004 [4294675.541000] hub 5-0:1.0: USB hub found [4294675.541000] hub 5-0:1.0: 4 ports detected [4294675.542000] usb 2-2: new full speed USB device using uhci_hcd and address 2 [4294675.685000] SCSI subsystem initialized [4294675.687000] Initializing USB Mass Storage driver... [4294675.881000] scsi0 : SCSI emulation for USB Mass Storage devices [4294675.881000] usb-storage: device found at 2 [4294675.881000] usb-storage: waiting for device to settle before scanning [4294675.881000] usbcore: registered new driver usb-storage [4294675.881000] USB Mass Storage support registered. [4294675.947000] Attempting manual resume [4294675.990000] EXT3-fs: mounted filesystem with ordered data mode. [4294676.012000] kjournald starting. Commit interval 5 seconds [4294676.295000] usb 5-1: new high speed USB device using ehci_hcd and address 2 [4294676.413000] scsi1 : SCSI emulation for USB Mass Storage devices [4294676.413000] usb-storage: device found at 2 [4294676.413000] usb-storage: waiting for device to settle before scanning [4294676.619000] usb 5-2: new high speed USB device using ehci_hcd and address 3 [4294676.736000] scsi2 : SCSI emulation for USB Mass Storage devices [4294676.736000] usb-storage: device found at 3 [4294676.736000] usb-storage: waiting for device to settle before scanning [4294677.252000] usb 4-1: new low speed USB device using uhci_hcd and address 2 [4294677.639000] usb 4-2: new full speed USB device using uhci_hcd and address 3 [4294678.033000] 70 00 02 00 00 00 00 0B 00 00 00 00 3A 00 00 00 00 00 [4294678.033000] scsi3 : SCSI emulation for USB Mass Storage devices [4294678.033000] usb-storage: device found at 3 [4294678.033000] usb-storage: waiting for device to settle before scanning [4294680.887000] Vendor: Generic Model: Flash R/W Rev: 2002 [4294680.887000] Type: Direct-Access ANSI SCSI revision: 02 [4294680.887000] usb-storage: device scan complete [4294681.414000] Vendor: GENERIC Model: USB Mass Storage Rev: 2.00 [4294681.414000] Type: Direct-Access ANSI SCSI revision: 02 [4294681.414000] usb-storage: device scan complete [4294681.737000] Vendor: LEXAR Model: JUMPDRIVE SPORT Rev: 3000 [4294681.737000] Type: Direct-Access ANSI SCSI revision: 00 [4294681.737000] usb-storage: device scan complete [4294683.035000] Vendor: eUSB Model: Compact Flash Rev: [4294683.035000] Type: Direct-Access ANSI SCSI revision: 02 [4294683.035000] Vendor: SCM Micr Model: eUSB SmartMedia Rev: 0208 [4294683.035000] Type: Direct-Access ANSI SCSI revision: 00 [4294683.035000] usb-storage: device scan complete [4294686.949000] Driver 'sd' needs updating - please use bus_type methods [4294686.965000] sd 0:0:0:0: Attached scsi removable disk sda [4294686.966000] SCSI device sdb: 255744 512-byte hdwr sectors (131 MB) [4294686.968000] sdb: Write Protect is off [4294686.968000] sdb: Mode Sense: 03 00 00 00 [4294686.968000] sdb: assuming drive cache: write through [4294686.973000] SCSI device sdb: 255744 512-byte hdwr sectors (131 MB) [4294686.974000] sdb: Write Protect is off [4294686.974000] sdb: Mode Sense: 03 00 00 00 [4294686.974000] sdb: assuming drive cache: write through [4294686.974000] sdb: sdb1 [4294686.975000] sd 1:0:0:0: Attached scsi removable disk sdb [4294686.978000] SCSI device sdc: 1014784 512-byte hdwr sectors (520 MB) [4294686.980000] sdc: Write Protect is off [4294686.980000] sdc: Mode Sense: 43 00 00 00 [4294686.980000] sdc: assuming drive cache: write through [4294686.984000] SCSI device sdc: 1014784 512-byte hdwr sectors (520 MB) [4294686.985000] sdc: Write Protect is off [4294686.985000] sdc: Mode Sense: 43 00 00 00 [4294686.985000] sdc: assuming drive cache: write through [4294686.985000] sdc: sdc1 [4294687.140000] sd 2:0:0:0: Attached scsi removable disk sdc [4294687.155000] SCSI device sdd: 15744 512-byte hdwr sectors (8 MB) [4294687.160000] sdd: test WP failed, assume Write Enabled [4294687.160000] sdd: assuming drive cache: write through [4294687.176000] SCSI device sdd: 15744 512-byte hdwr sectors (8 MB) [4294687.183000] sdd: test WP failed, assume Write Enabled [4294687.183000] sdd: assuming drive cache: write through [4294687.183000] sdd: sdd1 [4294687.191000] sd 3:0:0:0: Attached scsi removable disk sdd [4294687.294000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294687.525000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294687.757000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294687.892000] sddr09: could not read card info [4294687.900000] sddr09: could not read card info [4294687.901000] sde: test WP failed, assume Write Enabled [4294687.901000] sde: assuming drive cache: write through [4294687.901000] sd 3:0:0:1: Attached scsi removable disk sde [4294687.911000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [4294687.911000] sd 1:0:0:0: Attached scsi generic sg1 type 0 [4294687.911000] sd 2:0:0:0: Attached scsi generic sg2 type 0 [4294687.911000] sd 3:0:0:0: Attached scsi generic sg3 type 0 [4294687.911000] sd 3:0:0:1: Attached scsi generic sg4 type 0 [4294689.227000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [4294689.233000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [4294689.267000] hw_random: cannot enable RNG, aborting [4294689.355000] Linux agpgart interface v0.101 (c) Dave Jones [4294689.361000] agpgart: Detected an Intel i845 Chipset. [4294689.364000] agpgart: AGP aperture is 64M @ 0xec000000 [4294689.528000] Real Time Clock Driver v1.12 [4294689.911000] b44.c:v0.97 (Nov 30, 2005) [4294689.911000] ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5 [4294689.914000] eth0: Broadcom 4400 10/100BaseT Ethernet 00:c0:9f:1e:7f:7c [4294689.972000] ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 [4294689.972000] Yenta: CardBus bridge found at 0000:02:06.0 [1025:0020] [4294689.972000] Yenta O2: res at 0x94/0xD4: 00/ea [4294689.972000] Yenta O2: enabling read prefetch/write burst [4294689.995000] Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9d48b1, caps: 0x904713/0x4006 [4294690.027000] input: SynPS/2 Synaptics TouchPad as /class/input/input1 [4294690.125000] Yenta: ISA IRQ mask 0x0898, PCI irq 10 [4294690.125000] Socket status: 30000006 [4294690.125000] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x5fff [4294690.125000] cs: IO port probe 0x4000-0x5fff: clean. [4294690.126000] pcmcia: parent PCI bridge Memory window: 0xe8200000 - 0xe87fffff [4294690.126000] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x34ffffff [4294690.134000] ACPI: PCI Interrupt 0000:02:06.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 [4294690.134000] Yenta: CardBus bridge found at 0000:02:06.1 [1025:0020] [4294690.256000] Yenta: ISA IRQ mask 0x0898, PCI irq 10 [4294690.256000] Socket status: 30000410 [4294690.256000] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x5fff [4294690.256000] cs: IO port probe 0x4000-0x5fff: clean. [4294690.257000] pcmcia: parent PCI bridge Memory window: 0xe8200000 - 0xe87fffff [4294690.257000] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x34ffffff [4294690.376000] input: PC Speaker as /class/input/input2 [4294690.514000] ieee1394: Initialized config rom entry `ip1394' [4294690.516000] ohci1394: $Rev: 1313 $ Ben Collins <[EMAIL PROTECTED]> [4294690.516000] ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 [4294690.566000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[e8208000-e82087ff] Max Packet=[2048] [4294690.583000] usbcore: registered new driver hiddev [4294690.615000] parport: PnPBIOS parport detected. [4294690.615000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [4294690.637000] input: HID 1241:1177 as /class/input/input3 [4294690.637000] input: USB HID v1.00 Mouse [HID 1241:1177] on usb-0000:02:09.1-1 [4294690.637000] usbcore: registered new driver usbhid [4294690.637000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [4294690.645000] parport0: Printer, Hewlett-Packard HP LaserJet 5L [4294690.723000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 [4294690.723000] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [4294690.887000] pccard: PCMCIA card inserted into slot 1 [4294690.902000] irda_init() [4294690.902000] NET: Registered protocol family 23 [4294690.960000] nsc_ircc_pnp_probe() : Found cfg_base 0x000 ; firbase 0x2F8 ; irq 3 ; dma 1. [4294690.960000] nsc-ircc, Found chip at base=0x000 [4294690.960000] nsc-ircc, driver loaded (Dag Brattli) [4294690.960000] IrDA: Registered device irda0 [4294690.960000] nsc-ircc, Found dongle: HP HSDL-1100/HSDL-2100 [4294690.960000] nsc-ircc, Found chip at base=0x04e [4294690.960000] nsc-ircc, driver loaded (Dag Brattli) [4294690.960000] nsc_ircc_open(), can't get iobase of 0x2f8 [4294691.284000] intel8x0_measure_ac97_clock: measured 50361 usecs [4294691.284000] intel8x0: clocking to 48000 [4294691.334000] cs: memory probe 0xe8200000-0xe87fffff: excluding 0xe8200000-0xe825ffff [4294691.350000] pcmcia: registering new device pcmcia1.0 [4294691.382000] cs: IO port probe 0x100-0x3af: clean. [4294691.384000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [4294691.385000] cs: IO port probe 0x820-0x8ff: clean. [4294691.386000] cs: IO port probe 0xc00-0xcf7: clean. [4294691.386000] cs: IO port probe 0xa00-0xaff: clean. [4294691.445000] cs: IO port probe 0x100-0x3af: clean. [4294691.447000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [4294691.448000] cs: IO port probe 0x820-0x8ff: clean. [4294691.448000] cs: IO port probe 0xc00-0xcf7: clean. [4294691.449000] cs: IO port probe 0xa00-0xaff: clean. [4294691.731000] ts: Compaq touchscreen protocol output [4294692.580000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00c09f00000bc685] [4294692.887000] NET: Registered protocol family 17 [4294694.851000] b44: eth0: Link is up at 100 Mbps, full duplex. [4294694.851000] b44: eth0: Flow control is on for TX and on for RX. [4294698.315000] NET: Registered protocol family 10 [4294698.316000] lo: Disabled Privacy Extensions [4294698.317000] IPv6 over IPv4 tunneling driver [4294708.563000] eth0: no IPv6 routers present [4294723.475000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294723.705000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294723.935000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294724.165000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294724.395000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294724.625000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294724.760000] sddr09: could not read card info [4294724.768000] sddr09: could not read card info [4294724.768000] sde: test WP failed, assume Write Enabled [4294724.768000] sde: assuming drive cache: write through [4294725.877000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294726.107000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294726.337000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294726.567000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294726.798000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294727.031000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294727.167000] sddr09: could not read card info [4294727.175000] sddr09: could not read card info [4294727.175000] sde: test WP failed, assume Write Enabled [4294727.175000] sde: assuming drive cache: write through [4294728.285000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294728.515000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294728.745000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294728.975000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294729.205000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294729.435000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294729.570000] sddr09: could not read card info [4294729.578000] sddr09: could not read card info [4294729.578000] sde: test WP failed, assume Write Enabled [4294729.578000] sde: assuming drive cache: write through [4294730.687000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294730.917000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294731.147000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294731.377000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294731.607000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294731.837000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294731.972000] sddr09: could not read card info [4294731.980000] sddr09: could not read card info [4294731.980000] sde: test WP failed, assume Write Enabled [4294731.980000] sde: assuming drive cache: write through [4294733.089000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294733.319000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294733.550000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294733.783000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294734.013000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294734.243000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294734.378000] sddr09: could not read card info [4294734.386000] sddr09: could not read card info [4294734.386000] sde: test WP failed, assume Write Enabled [4294734.386000] sde: assuming drive cache: write through [4294735.496000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294735.726000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294735.956000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294736.186000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294736.416000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294736.646000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294736.781000] sddr09: could not read card info [4294736.789000] sddr09: could not read card info [4294736.789000] sde: test WP failed, assume Write Enabled [4294736.789000] sde: assuming drive cache: write through [4294737.898000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294738.128000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294738.358000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294738.588000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294738.818000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294739.048000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294739.183000] sddr09: could not read card info [4294739.191000] sddr09: could not read card info [4294739.191000] sde: test WP failed, assume Write Enabled [4294739.191000] sde: assuming drive cache: write through [4294740.301000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294740.534000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294740.764000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294740.994000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294741.224000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294741.454000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294741.589000] sddr09: could not read card info [4294741.597000] sddr09: could not read card info [4294741.597000] sde: test WP failed, assume Write Enabled [4294741.597000] sde: assuming drive cache: write through [4294742.707000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294742.937000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294743.167000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294743.397000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294743.627000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294743.857000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294743.992000] sddr09: could not read card info [4294744.000000] sddr09: could not read card info [4294744.000000] sde: test WP failed, assume Write Enabled [4294744.000000] sde: assuming drive cache: write through [4294745.109000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294745.339000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294745.569000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294745.799000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294746.029000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294746.259000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294746.394000] sddr09: could not read card info [4294746.402000] sddr09: could not read card info [4294746.402000] sde: test WP failed, assume Write Enabled [4294746.402000] sde: assuming drive cache: write through [4294747.512000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294747.742000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294747.972000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294748.202000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294748.432000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294748.662000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294748.797000] sddr09: could not read card info [4294748.805000] sddr09: could not read card info [4294748.805000] sde: test WP failed, assume Write Enabled [4294748.805000] sde: assuming drive cache: write through [4294749.915000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294750.145000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294750.375000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294750.605000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294750.835000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294751.065000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294751.200000] sddr09: could not read card info [4294751.208000] sddr09: could not read card info [4294751.208000] sde: test WP failed, assume Write Enabled [4294751.208000] sde: assuming drive cache: write through [4294752.317000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294752.547000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294752.777000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294753.007000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294753.237000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294753.467000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294753.602000] sddr09: could not read card info [4294753.610000] sddr09: could not read card info [4294753.610000] sde: test WP failed, assume Write Enabled [4294753.611000] sde: assuming drive cache: write through [4294754.720000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294754.950000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294755.180000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294755.410000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294755.640000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294755.870000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294756.005000] sddr09: could not read card info [4294756.013000] sddr09: could not read card info [4294756.013000] sde: test WP failed, assume Write Enabled [4294756.013000] sde: assuming drive cache: write through [4294757.122000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294757.352000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294757.582000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294757.812000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294758.042000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294758.272000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294758.407000] sddr09: could not read card info [4294758.415000] sddr09: could not read card info [4294758.415000] sde: test WP failed, assume Write Enabled [4294758.415000] sde: assuming drive cache: write through [4294759.524000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294759.754000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294759.984000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294760.214000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294760.444000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294760.675000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294760.813000] sddr09: could not read card info [4294760.819000] sddr09: could not read card info [4294760.819000] sde: test WP failed, assume Write Enabled [4294760.819000] sde: assuming drive cache: write through [4294761.929000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294762.159000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294762.389000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294762.619000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294762.849000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294763.079000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294763.214000] sddr09: could not read card info [4294763.222000] sddr09: could not read card info [4294763.222000] sde: test WP failed, assume Write Enabled [4294763.222000] sde: assuming drive cache: write through [4294764.331000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294764.561000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294764.791000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294765.021000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294765.251000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294765.481000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294765.616000] sddr09: could not read card info [4294765.624000] sddr09: could not read card info [4294765.624000] sde: test WP failed, assume Write Enabled [4294765.624000] sde: assuming drive cache: write through [4294766.733000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294766.963000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294767.193000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294767.424000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294767.657000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294767.888000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294768.023000] sddr09: could not read card info [4294768.031000] sddr09: could not read card info [4294768.031000] sde: test WP failed, assume Write Enabled [4294768.031000] sde: assuming drive cache: write through [4294769.141000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294769.371000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294769.601000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294769.831000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294770.061000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294770.291000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294770.426000] sddr09: could not read card info [4294770.434000] sddr09: could not read card info [4294770.434000] sde: test WP failed, assume Write Enabled [4294770.434000] sde: assuming drive cache: write through [4294772.146000] lp0: using parport0 (interrupt-driven). [4294772.197000] sbp2: $Rev: 1306 $ Ben Collins <[EMAIL PROTECTED]> [4294772.197000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) [4294772.197000] ieee1394: sbp2: Try serialize_io=0 for better performance [4294772.282000] Adding 795144k swap on /dev/hda8. Priority:-1 extents:1 across:795144k [4294851.968000] EXT3 FS on hda1, internal journal [4294852.142000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 [4294852.142000] md: bitmap version 4.39 [4294852.783000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: [EMAIL PROTECTED] [4294853.313000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294853.543000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294853.773000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294854.003000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294854.233000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294854.463000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294854.598000] sddr09: could not read card info [4294854.606000] sddr09: could not read card info [4294854.606000] sde: test WP failed, assume Write Enabled [4294854.606000] sde: assuming drive cache: write through [4294854.894000] cdrom: open failed. [4294855.534000] kjournald starting. Commit interval 5 seconds [4294855.534000] EXT3 FS on hda5, internal journal [4294855.534000] EXT3-fs: mounted filesystem with ordered data mode. [4294855.535000] kjournald starting. Commit interval 5 seconds [4294855.535000] EXT3 FS on hda6, internal journal [4294855.535000] EXT3-fs: mounted filesystem with ordered data mode. [4294855.537000] kjournald starting. Commit interval 5 seconds [4294855.537000] EXT3 FS on hda7, internal journal [4294855.537000] EXT3-fs: mounted filesystem with ordered data mode. -------------------------------------------------------------------------------------- Le lundi 08 mai 2006 à 13:13 +0000, Scott James Remnant a écrit : > *** This bug is a duplicate of bug 42970 *** > > You may have another bug here that no partitions are detected on the device. > > Provide /var/log/dmesg > -- dane-elec eUSB compact flash +smart detected but unmontable https://launchpad.net/bugs/42924 -- desktop-bugs mailing list desktop-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/desktop-bugs
