Travis Anti-virus: In the virus.cfg you turn off/on outgoing scanning. Look for # # The following options allow you to limit scanning to only incoming or outgoing # E-mail. #
INCOMING ON OUTGOING ON For spam checking, look at the bottom of the global.cfg for #<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< OUTBOUND ONLY >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # (PRO VERSION ONLY) The actions listed below only apply to outgoing E-mail, Note that the DUL test should NOT # be used to block outgoing mail! Where you determine for outbound mail whether to WARN, HOLD, DELETE, etc. Of course you could set up tests that are IGNORE'd in default.junkmail and take a different action in outbound section of global.cfg. Beyond that, you are good to go. John -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Travis Sullivan Sent: Friday, November 18, 2005 11:04 AM To: [email protected] Subject: Re: [Declude.JunkMail] Imail 2006 standalone I searched, not a lot to be honest, the archive, and manual, but couldn't find info on setting up outgoing mail scanning with declude pro 1.82. Does anyone have a primer or at least some notes to share with me? TIA Travis --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type "unsubscribe Declude.JunkMail". The archives can be found at http://www.mail-archive.com. --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type "unsubscribe Declude.JunkMail". The archives can be found at http://www.mail-archive.com.
