Yesterday's report on my declude logfile showed
=...................................1........0.01%
02/28/2005..........................1........0.01%
FF156FB0094D05A.....................1........0.01%
I005................................1........0.01%
QCEA370970074D08A...................1........0.01%
SET.................................1........0.01%
SNIFFQCE053ABD0086D062..............1........0.01%
This is from
Total Messages Processed: 12,316
And loglevel set to HIGH and the size of the file is 122 MB
I am running 2.0.5
Goran Jovanovic
The LAN Shoppe
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:Declude.JunkMail-
> [EMAIL PROTECTED] On Behalf Of Colbeck, Andrew
> Sent: Tuesday, March 01, 2005 2:33 PM
> To: [email protected]
> Subject: RE: [Declude.JunkMail] Log Corruption
>
> I had the opposite experience. Back at, oh, 1.7x I ran on LOGLEVEL
> HIGH, and had lots of log corruption. I had to drop down to MID. The
> increase in spam volume made it such that at MID, I had lots of log
> corruption again.
>
> With 2.x and the lines being written in a batch, I noticed an
immediate
> drop in my disk usage and a huge drop in corrupted lines.
>
> Andrew 8)
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Andy Schmidt
> Sent: Tuesday, March 01, 2005 9:22 AM
> To: [email protected]
> Subject: RE: [Declude.JunkMail] Log Corruption
>
>
> Hi,
>
> Yesterday was actually a good day (here a snippet):
>
> TEST # FAILED Percentage
> 18:51:58................1........0.01%
> SNIF02/28/2005..........1........0.01%
> SPA02/28/2005...........1........0.01%
> WEIG02/28/2005..........1........0.01%
>
> Sure, I used to get reports that were "clean", but considering it only
> happens a "few" times a day, I don't consider it a major issue and I
can
> live with it.
>
> Also I used to run in MID log level, but after 1.76 (or so), they
> removed the test summary line form MID level, and I needed to switch
to
> HIGH log level. It's entirely possible that the log corruption is not
> really specific to 2.0x - but rather a secondary result because they
> forded me to deal with tremendously large log files (vs. the old MID
log
> files).
>
> Best Regards
> Andy Schmidt
>
> H&M Systems Software, Inc.
> 600 East Crescent Avenue, Suite 203
> Upper Saddle River, NJ 07458-1846
>
> Phone: +1 201 934-3414 x20 (Business)
> Fax: +1 201 934-9206
>
> http://www.HM-Software.com/
>
> ---
> [This E-mail was scanned for viruses by Declude Virus
> (http://www.declude.com)]
>
> ---
> This E-mail came from the Declude.JunkMail mailing list. To
> unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type
> "unsubscribe Declude.JunkMail". The archives can be found at
> http://www.mail-archive.com.
> ---
> [This E-mail was scanned for viruses by Declude Virus
> (http://www.declude.com)]
>
> ---
> This E-mail came from the Declude.JunkMail mailing list. To
> unsubscribe, just send an E-mail to [EMAIL PROTECTED], and
> type "unsubscribe Declude.JunkMail". The archives can be found
> at http://www.mail-archive.com.
---
[This E-mail was scanned for viruses by Declude Virus (http://www.declude.com)]
---
This E-mail came from the Declude.JunkMail mailing list. To
unsubscribe, just send an E-mail to [EMAIL PROTECTED], and
type "unsubscribe Declude.JunkMail". The archives can be found
at http://www.mail-archive.com.
