Salut, Le Mardi 21 Janvier 2003 16:38, vous avez �crit :
> Le Mardi 21 Janvier 2003 08:42, raber a �crit : > > Y a t il une bonne �me pour me venir en aide pour parvenir � utiliser mon > > scanner PRIMAX COLORADO 19200 USB ? > > Je coince. J'ai trouv� ceci : (http://px-backend.sourceforge.net/) ------------- Sane driver for primax scanners under Linux Currently NOT supported are: * all kind of USB/SCSI scanners -------------- Ton espoir vient de l� : http://homepages.paradise.net.nz/stevenel/scanner/ Il y a un patch en beta pour sane qui g�re ton scanner. Mais l'install n'a pas l'air simple : ------------------ Hopefully the process of patching both SANE and the kernel have now been simplified 1. Patch your kernel with the supplied file to enable the E3 and E4 support 2. Install the updated scanner.o file into your modules directory and "modprobe scanner" 3. Download the 1.0.9 sane backend and unpack 4. Patch the source with the supplied diff file from the download directory gunzip -c e3_driver_0.6.diff.gz | patch -p1 5. Now build and install the sane release as normal 6. Once build try "scanimage -L" to see if it detects your scanner 7. If this fails type "export SANE_DEBUG_VIDEO=128" and retry the above 8. Also refer to the FAQ page for more tips on debugging 9. Note you will still need some support files as detailed in the 0.4 notes below -------------------- Je n'ai pas lu le d�but du fil et j'ignore si tu as d�j� fait tout cela... Tom. -- Thomas Pimmel email : [EMAIL PROTECTED] http : http://www.ringard.org
Vous souhaitez acquerir votre Pack ou des Services MandrakeSoft? Rendez-vous sur "http://www.mandrakestore.com";
