Package: xserver-xorg
Version: 1:7.5+2
Severity: critical
Justification: breaks the whole system
I upgraded yesterday my debian squeeze and after that xserver stops responding
and only a blank screen is seen. I had to cold boot the system (CTRL+ALT+BkSp
doesn't work).
Using a Toshiba Tecra 8000 Laptop with neomagic graphics card.
Before Upgrade no issues with X.
-- Package-specific info:
/var/lib/x11/X.roster does not exist.
/var/lib/x11/X.md5sum does not exist.
X server symlink status:
lrwxrwxrwx 1 root root 13 Jan 29 23:19 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 1710344 Jan 21 00:01 /usr/bin/Xorg
/var/lib/x11/xorg.conf.roster does not exist.
VGA-compatible devices on PCI bus:
00:04.0 VGA compatible controller: Neomagic Corporation NM2200 [MagicGraph
256AV] (rev 12)
/etc/X11/xorg.conf does not exist.
Xorg X server log files on system:
-rw-r--r-- 1 root root 24316 Jan 30 09:12 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file
/var/log/Xorg.0.log:
X.Org X Server 1.7.4
Release Date: 2010-01-08
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-trunk-686 i686 Debian
Current Operating System: Linux notebook 2.6.32-trunk-686 #1 SMP Sun Jan 10
06:32:16 UTC 2010 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-trunk-686
root=UUID=fbde2bf6-ebde-4ea2-850b-9864c06a3800 ro single
Build Date: 20 January 2010 10:52:55PM
xorg-server 2:1.7.4-2 (bgog...@debian.org)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 30 09:12:04 2010
(II) Loader magic: 0x81e7680
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) using VT number 2
(--) PCI:*(0:0:4:0) 10c8:0005:1179:0001 Neomagic Corporation NM2200 [MagicGraph
256AV] rev 18, Mem @ 0xdf000000/16777216, 0xff800000/4194304, 0xff700000/1048576
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
Section "Device"
Identifier "Builtin Default neomagic Device 0"
Driver "neomagic"
EndSection
Section "Screen"
Identifier "Builtin Default neomagic Screen 0"
Device "Builtin Default neomagic Device 0"
EndSection
Section "Device"
Identifier "Builtin Default vesa Device 0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Builtin Default vesa Screen 0"
Device "Builtin Default vesa Device 0"
EndSection
Section "Device"
Identifier "Builtin Default fbdev Device 0"
Driver "fbdev"
EndSection
Section "Screen"
Identifier "Builtin Default fbdev Screen 0"
Device "Builtin Default fbdev Device 0"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default neomagic Screen 0"
Screen "Builtin Default vesa Screen 0"
Screen "Builtin Default fbdev Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default neomagic Screen 0" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default neomagic Device 0"
(==) No monitor specified for screen "Builtin Default neomagic Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (1)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (2)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable
AutoAddDevices.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "neomagic"
(II) Loading /usr/lib/xorg/modules/drivers/neomagic_drv.so
(II) Module neomagic: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.2.4
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 2.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 0.4.1
ABI class: X.Org Video Driver, version 6.0
(II) NEOMAGIC: Driver for Neomagic chipsets: neo2070, neo2090, neo2093,
neo2097, neo2160, neo2200, neo2230, neo2360, neo2380
(II) VESA: driver for VESA chipsets: vesa
(II) FBDEV: driver for framebuffer: fbdev
(II) Primary Device is: PCI 0...@00:04:0
(WW) Falling back to old probe method for neomagic
(--) Assigning device section with no busID to primary device
(--) Chipset neo2200 found
(WW) Falling back to old probe method for vesa
(WW) Falling back to old probe method for fbdev
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 0.0.2
ABI class: X.Org Video Driver, version 6.0
(EE) open /dev/fb0: No such file or directory
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 0.1.0
ABI class: X.Org Video Driver, version 6.0
(II) NEOMAGIC(0): Chipset is a MagicMedia 256AV (NM2200)
(II) NEOMAGIC(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is
0x0000
(--) NEOMAGIC(0): Panel is a 1024x768 color TFT display
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.1.0
ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.0.0
ABI class: X.Org Video Driver, version 6.0
(II) NEOMAGIC(0): initializing int10
(II) NEOMAGIC(0): Primary V_BIOS segment is: 0xc000
(II) NEOMAGIC(0): VESA BIOS detected
(II) NEOMAGIC(0): VESA VBE Version 2.0
(II) NEOMAGIC(0): VESA VBE Total Mem: 2496 kB
(II) NEOMAGIC(0): VESA VBE OEM: MagicGraph 256 AV 44K PRELIMINARY
(II) NEOMAGIC(0): VESA VBE OEM Software Rev: 0.19
(II) NEOMAGIC(0): VESA VBE OEM Vendor: NeoMagic
(II) NEOMAGIC(0): VESA VBE OEM Product: MagicMedia 256 AV
(II) NEOMAGIC(0): VESA VBE OEM Product Rev: 01.0
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) NEOMAGIC(0): VESA VBE DDC supported
(II) NEOMAGIC(0): VESA VBE DDC Level 2
(II) NEOMAGIC(0): VESA VBE DDC transfer in appr. 1 sec.
f000:87f1: 01 ILLEGAL EXTENDED X86 OPCODE!
(II) NEOMAGIC(0): VESA VBE DDC invalid
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) NEOMAGIC(0): I2C bus "I2C bus" initialized.
(II) NEOMAGIC(0): I2C device "I2C bus:ddc2" registered at address 0xA0.
(II) NEOMAGIC(0): I2C device "I2C bus:E-EDID segment register" registered at
address 0x60.
(II) NEOMAGIC(0): I2C device "I2C bus:EDID EEPROM interface" registered at
address 0x62.
(II) NEOMAGIC(0): I2C device "I2C bus:DDC control interface" registered at
address 0x6E.
(--) NEOMAGIC(0): No DDC signal
(II) NEOMAGIC(0): Creating default Display subsection in Screen section
"Builtin Default neomagic Screen 0" for depth/fbbpp 16/16
(==) NEOMAGIC(0): Depth 16, (--) framebuffer bpp 16
(==) NEOMAGIC(0): RGB weight 565
(==) NEOMAGIC(0): Default visual is TrueColor
(==) NEOMAGIC(0): Using gamma correction (1.0, 1.0, 1.0)
(--) NEOMAGIC(0): Internal LCD only display mode
(==) NEOMAGIC(0): using linear mode
(**) NEOMAGIC(0): using PCI Burst mode
(**) NEOMAGIC(0): Option StrangeLockups set: disabling some acceleration
(--) NEOMAGIC(0): FB base address is set at 0xDF000000.
(--) NEOMAGIC(0): MMIO base address is set at 0xFF800000.
(--) NEOMAGIC(0): MMIO base address2 is set at 0xFF700000.
(--) NEOMAGIC(0): VideoRAM: 2560 kByte
(--) NEOMAGIC(0): Max Clock: 110000 kHz
(--) NEOMAGIC(0): Using hsync range matching panel size: 28.00-49.31 kHz
(--) NEOMAGIC(0): Using vsync range for panel: 55.00-65.00 kHz
(II) NEOMAGIC(0): <default monitor>: Using hsync range of 28.00-49.31 kHz
(II) NEOMAGIC(0): <default monitor>: Using vrefresh range of 55.00-65.00 Hz
(WW) NEOMAGIC(0): Unable to estimate virtual size
(II) NEOMAGIC(0): Clock range: 11.00 to 110.00 MHz
(II) NEOMAGIC(0): Removing mode (640x350) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "640x350" (unknown reason)
(II) NEOMAGIC(0): Removing mode (320x175) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "320x175" (unknown reason)
(II) NEOMAGIC(0): Removing mode (640x400) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "640x400" (unknown reason)
(II) NEOMAGIC(0): Removing mode (320x200) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "320x200" (unknown reason)
(II) NEOMAGIC(0): Removing mode (720x400) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "720x400" (unknown reason)
(II) NEOMAGIC(0): Removing mode (360x200) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "360x200" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "640x480" (vrefresh out of range)
(II) NEOMAGIC(0): Not using default mode "320x240" (vrefresh out of range)
(II) NEOMAGIC(0): Not using default mode "640x480" (vrefresh out of range)
(II) NEOMAGIC(0): Not using default mode "320x240" (vrefresh out of range)
(II) NEOMAGIC(0): Not using default mode "640x480" (vrefresh out of range)
(II) NEOMAGIC(0): Not using default mode "320x240" (vrefresh out of range)
(II) NEOMAGIC(0): Removing mode (400x300) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "400x300" (unknown reason)
(II) NEOMAGIC(0): Removing mode (400x300) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "400x300" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "800x600" (vrefresh out of range)
(II) NEOMAGIC(0): Removing mode (400x300) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "400x300" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "800x600" (vrefresh out of range)
(II) NEOMAGIC(0): Removing mode (400x300) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "400x300" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "800x600" (hsync out of range)
(II) NEOMAGIC(0): Removing mode (400x300) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "400x300" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1024x768" (bad mode
clock/interlace/doublescan)
(II) NEOMAGIC(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) NEOMAGIC(0): Removing mode (512x384) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "512x384" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1024x768" (hsync out of range)
(II) NEOMAGIC(0): Removing mode (512x384) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "512x384" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1024x768" (hsync out of range)
(II) NEOMAGIC(0): Removing mode (512x384) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "512x384" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1024x768" (hsync out of range)
(II) NEOMAGIC(0): Removing mode (512x384) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "512x384" (unknown reason)
(II) NEOMAGIC(0): Removing mode (1152x864) larger than the LCD panel (1024x768)
(II) NEOMAGIC(0): Not using default mode "1152x864" (unknown reason)
(II) NEOMAGIC(0): Removing mode (576x432) larger than the LCD panel (1024x768)
(II) NEOMAGIC(0): Not using default mode "576x432" (unknown reason)
(II) NEOMAGIC(0): Removing mode (1280x960) larger than the LCD panel (1024x768)
(II) NEOMAGIC(0): Not using default mode "1280x960" (unknown reason)
(II) NEOMAGIC(0): Removing mode (640x480) larger than the LCD panel (1024x768)
(II) NEOMAGIC(0): Not using default mode "640x480" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1280x960" (bad mode
clock/interlace/doublescan)
(II) NEOMAGIC(0): Removing mode (640x480) larger than the LCD panel (1024x768)
(II) NEOMAGIC(0): Not using default mode "640x480" (unknown reason)
(II) NEOMAGIC(0): Removing mode (1280x1024) larger than the LCD panel (1024x768)
(II) NEOMAGIC(0): Not using default mode "1280x1024" (unknown reason)
(II) NEOMAGIC(0): Removing mode (640x512) larger than the LCD panel (1024x768)
(II) NEOMAGIC(0): Not using default mode "640x512" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1280x1024" (bad mode
clock/interlace/doublescan)
(II) NEOMAGIC(0): Removing mode (640x512) larger than the LCD panel (1024x768)
(II) NEOMAGIC(0): Not using default mode "640x512" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1280x1024" (bad mode
clock/interlace/doublescan)
(II) NEOMAGIC(0): Removing mode (640x512) larger than the LCD panel (1024x768)
(II) NEOMAGIC(0): Not using default mode "640x512" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1600x1200" (insufficient memory for
mode)
(II) NEOMAGIC(0): Not using default mode "800x600" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1600x1200" (insufficient memory for
mode)
(II) NEOMAGIC(0): Not using default mode "800x600" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1600x1200" (insufficient memory for
mode)
(II) NEOMAGIC(0): Not using default mode "800x600" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1600x1200" (insufficient memory for
mode)
(II) NEOMAGIC(0): Not using default mode "800x600" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1600x1200" (insufficient memory for
mode)
(II) NEOMAGIC(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) NEOMAGIC(0): Not using default mode "1792x1344" (insufficient memory for
mode)
(II) NEOMAGIC(0): Not using default mode "896x672" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1792x1344" (insufficient memory for
mode)
(II) NEOMAGIC(0): Not using default mode "896x672" (bad mode
clock/interlace/doublescan)
(II) NEOMAGIC(0): Not using default mode "1856x1392" (insufficient memory for
mode)
(II) NEOMAGIC(0): Not using default mode "928x696" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1856x1392" (insufficient memory for
mode)
(II) NEOMAGIC(0): Not using default mode "928x696" (bad mode
clock/interlace/doublescan)
(II) NEOMAGIC(0): Not using default mode "1920x1440" (insufficient memory for
mode)
(II) NEOMAGIC(0): Not using default mode "960x720" (bad mode
clock/interlace/doublescan)
(II) NEOMAGIC(0): Not using default mode "1920x1440" (insufficient memory for
mode)
(II) NEOMAGIC(0): Not using default mode "960x720" (bad mode
clock/interlace/doublescan)
(II) NEOMAGIC(0): Removing mode (832x624) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "832x624" (unknown reason)
(II) NEOMAGIC(0): Removing mode (416x312) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "416x312" (unknown reason)
(II) NEOMAGIC(0): Removing mode (1152x864) larger than the LCD panel (1024x768)
(II) NEOMAGIC(0): Not using default mode "1152x864" (unknown reason)
(II) NEOMAGIC(0): Removing mode (576x432) larger than the LCD panel (1024x768)
(II) NEOMAGIC(0): Not using default mode "576x432" (unknown reason)
(II) NEOMAGIC(0): Removing mode (1152x864) larger than the LCD panel (1024x768)
(II) NEOMAGIC(0): Not using default mode "1152x864" (unknown reason)
(II) NEOMAGIC(0): Removing mode (576x432) larger than the LCD panel (1024x768)
(II) NEOMAGIC(0): Not using default mode "576x432" (unknown reason)
(II) NEOMAGIC(0): Removing mode (1152x864) larger than the LCD panel (1024x768)
(II) NEOMAGIC(0): Not using default mode "1152x864" (unknown reason)
(II) NEOMAGIC(0): Removing mode (576x432) larger than the LCD panel (1024x768)
(II) NEOMAGIC(0): Not using default mode "576x432" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1152x864" (bad mode
clock/interlace/doublescan)
(II) NEOMAGIC(0): Removing mode (576x432) larger than the LCD panel (1024x768)
(II) NEOMAGIC(0): Not using default mode "576x432" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1152x864" (bad mode
clock/interlace/doublescan)
(II) NEOMAGIC(0): Removing mode (576x432) larger than the LCD panel (1024x768)
(II) NEOMAGIC(0): Not using default mode "576x432" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1152x864" (bad mode
clock/interlace/doublescan)
(II) NEOMAGIC(0): Removing mode (576x432) larger than the LCD panel (1024x768)
(II) NEOMAGIC(0): Not using default mode "576x432" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1360x768" (width requires unsupported
line pitch)
(II) NEOMAGIC(0): Removing mode (680x384) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "680x384" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1360x768" (width requires unsupported
line pitch)
(II) NEOMAGIC(0): Removing mode (680x384) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "680x384" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1400x1050" (insufficient memory for
mode)
(II) NEOMAGIC(0): Not using default mode "700x525" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1400x1050" (insufficient memory for
mode)
(II) NEOMAGIC(0): Not using default mode "700x525" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1400x1050" (insufficient memory for
mode)
(II) NEOMAGIC(0): Not using default mode "700x525" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1400x1050" (insufficient memory for
mode)
(II) NEOMAGIC(0): Not using default mode "700x525" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1440x900" (width requires unsupported
line pitch)
(II) NEOMAGIC(0): Removing mode (720x450) larger than the LCD panel (1024x768)
(II) NEOMAGIC(0): Not using default mode "720x450" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1600x1024" (insufficient memory for
mode)
(II) NEOMAGIC(0): Removing mode (800x512) larger than the LCD panel (1024x768)
(II) NEOMAGIC(0): Not using default mode "800x512" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1680x1050" (insufficient memory for
mode)
(II) NEOMAGIC(0): Not using default mode "840x525" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1680x1050" (insufficient memory for
mode)
(II) NEOMAGIC(0): Not using default mode "840x525" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1680x1050" (insufficient memory for
mode)
(II) NEOMAGIC(0): Not using default mode "840x525" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1680x1050" (insufficient memory for
mode)
(II) NEOMAGIC(0): Not using default mode "840x525" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1680x1050" (insufficient memory for
mode)
(II) NEOMAGIC(0): Not using default mode "840x525" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1920x1080" (insufficient memory for
mode)
(II) NEOMAGIC(0): Not using default mode "960x540" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1920x1200" (insufficient memory for
mode)
(II) NEOMAGIC(0): Not using default mode "960x600" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1920x1440" (insufficient memory for
mode)
(II) NEOMAGIC(0): Not using default mode "960x720" (bad mode
clock/interlace/doublescan)
(II) NEOMAGIC(0): Not using default mode "2048x1536" (insufficient memory for
mode)
(II) NEOMAGIC(0): Not using default mode "1024x768" (bad mode
clock/interlace/doublescan)
(II) NEOMAGIC(0): Not using default mode "2048x1536" (insufficient memory for
mode)
(II) NEOMAGIC(0): Not using default mode "1024x768" (bad mode
clock/interlace/doublescan)
(II) NEOMAGIC(0): Not using default mode "2048x1536" (insufficient memory for
mode)
(II) NEOMAGIC(0): Not using default mode "1024x768" (bad mode
clock/interlace/doublescan)
(--) NEOMAGIC(0): Virtual size is 1024x768 (pitch 1024)
(**) NEOMAGIC(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) NEOMAGIC(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768
771 777 806 -hsync -vsync (48.4 kHz)
(**) NEOMAGIC(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) NEOMAGIC(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601
605 628 +hsync +vsync (37.9 kHz)
(**) NEOMAGIC(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) NEOMAGIC(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601
603 625 +hsync +vsync (35.2 kHz)
(**) NEOMAGIC(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) NEOMAGIC(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492
525 -hsync -vsync (31.5 kHz)
(**) NEOMAGIC(0): *Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) NEOMAGIC(0): Modeline "320x240"x60.1 12.59 320 328 376 400 240 245 246
262 doublescan -hsync -vsync (31.5 kHz)
(==) NEOMAGIC(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.2.1
ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) UnloadModule: "fbdev"
(II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) UnloadModule: "fbdevhw"
(II) Unloading /usr/lib/xorg/modules/linux/libfbdevhw.so
(II) NEOMAGIC(0): Stretching disabled
udev information:
P: /devices/platform/i8042/serio0/input/input0/event0
N: input/event0
S: char/13:64
S: input/by-path/platform-i8042-serio-0-event-kbd
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0
E: MAJOR=13
E: MINOR=64
E: DEVNAME=/dev/input/event0
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-0
E: XKBMODEL=pc105
E: XKBLAYOUT=de
E: XKBVARIANT=nodeadkeys
E: DEVLINKS=/dev/char/13:64 /dev/input/by-path/platform-i8042-serio-0-event-kbd
E: x11_driver=evdev
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1/event1
N: input/event1
S: char/13:65
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1/event1
E: MAJOR=13
E: MINOR=65
E: DEVNAME=/dev/input/event1
E: SUBSYSTEM=input
E: ID_INPUT=1
E: DEVLINKS=/dev/char/13:65
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2
N: input/event2
S: char/13:66
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2
E: MAJOR=13
E: MINOR=66
E: DEVNAME=/dev/input/event2
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=de
E: XKBVARIANT=nodeadkeys
E: DEVLINKS=/dev/char/13:66
E: x11_driver=evdev
P: /devices/platform/pcspkr/input/input3/event3
N: input/event3
S: char/13:67
S: input/by-path/platform-pcspkr-event-spkr
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/pcspkr/input/input3/event3
E: MAJOR=13
E: MINOR=67
E: DEVNAME=/dev/input/event3
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-pcspkr
E: DEVLINKS=/dev/char/13:67 /dev/input/by-path/platform-pcspkr-event-spkr
P: /devices/platform/i8042/serio1/input/input4/event4
N: input/event4
S: char/13:68
S: input/by-path/platform-i8042-serio-1-event-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio1/input/input4/event4
E: MAJOR=13
E: MINOR=68
E: DEVNAME=/dev/input/event4
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-1
E: x11_driver=evdev
E: DEVLINKS=/dev/char/13:68
/dev/input/by-path/platform-i8042-serio-1-event-mouse
DRM Information from dmesg:
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-trunk-686 (SMP w/1 CPU core)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages xserver-xorg depends on:
ii libc6 2.10.2-2 GNU C Library: Shared libraries
ii x11-xkb-utils 7.5+1 X11 XKB utilities
ii xkb-data 1.7-2 X Keyboard Extension (XKB) configu
ii xserver-xorg-core 2:1.7.4-2 Xorg X server - core server
ii xserver-xorg-input-al 1:7.5+2 the X.Org X server -- input driver
ii xserver-xorg-input-ev 1:2.3.2-3 X.Org X server -- evdev input driv
ii xserver-xorg-input-sy 1.2.1-1 Synaptics TouchPad driver for X.Or
ii xserver-xorg-input-wa 0.10.3+20100109-1 X.Org X server -- Wacom input driv
ii xserver-xorg-video-al 1:7.5+2 the X.Org X server -- output drive
ii xserver-xorg-video-ap 1:1.2.2-1 X.Org X server -- APM display driv
ii xserver-xorg-video-ar 1:0.7.2-1 X.Org X server -- ark display driv
ii xserver-xorg-video-at 1:6.12.4-2 X.Org X server -- ATI display driv
ii xserver-xorg-video-ch 1:1.2.2-1 X.Org X server -- Chips display dr
ii xserver-xorg-video-ci 1:1.3.2-1 X.Org X server -- Cirrus display d
ii xserver-xorg-video-fb 1:0.4.1-1 X.Org X server -- fbdev display dr
ii xserver-xorg-video-i1 1:1.3.3-1 X.Org X server -- i128 display dri
ii xserver-xorg-video-i7 1:1.3.2-1 X.Org X server -- i740 display dri
ii xserver-xorg-video-in 2:2.9.1-2 X.Org X server -- Intel i8xx, i9xx
ii xserver-xorg-video-ma 6.8.2-2 X.Org X server -- ATI Mach64 displ
ii xserver-xorg-video-mg 1:1.4.11.dfsg-2 X.Org X server -- MGA display driv
ii xserver-xorg-video-ne 1:1.2.4-1 X.Org X server -- Neomagic display
ii xserver-xorg-video-nv 1:2.1.15-1 X.Org X server -- NV display drive
ii xserver-xorg-video-op 1:0.2.904+svn827-1 X.Org X server -- VIA display driv
ii xserver-xorg-video-r1 6.8.1-2 X.Org X server -- ATI r128 display
ii xserver-xorg-video-ra 1:6.12.4-2 X.Org X server -- ATI Radeon displ
ii xserver-xorg-video-ra 1.3.0-2 X.Org X server -- AMD/ATI r5xx, r6
ii xserver-xorg-video-re 1:4.2.3-1 X.Org X server -- Rendition displa
ii xserver-xorg-video-s3 1:0.6.3-1 X.Org X server -- legacy S3 displa
ii xserver-xorg-video-s3 1:1.10.4-1 X.Org X server -- S3 ViRGE display
ii xserver-xorg-video-sa 1:2.3.1-1 X.Org X server -- Savage display d
ii xserver-xorg-video-si 1:1.7.3-1 X.Org X server -- SiliconMotion di
ii xserver-xorg-video-si 1:0.10.2-1 X.Org X server -- SiS display driv
ii xserver-xorg-video-si 1:0.9.3-1 X.Org X server -- SiS USB display
ii xserver-xorg-video-td 1:1.4.3-1 X.Org X server -- tdfx display dri
ii xserver-xorg-video-tr 1:1.3.3-1 X.Org X server -- Trident display
ii xserver-xorg-video-ts 1:1.2.3-1 X.Org X server -- Tseng display dr
ii xserver-xorg-video-v4 1:0.2.0-4 X.Org X server -- Video 4 Linux di
ii xserver-xorg-video-ve 1:2.3.0-1 X.Org X server -- VESA display dri
ii xserver-xorg-video-vm 1:10.16.9-1 X.Org X server -- VMware display d
ii xserver-xorg-video-vo 1:1.2.3-1 X.Org X server -- Voodoo display d
Versions of packages xserver-xorg recommends:
ii libgl1-mesa-dri 7.6.1-1 A free implementation of the OpenG
xserver-xorg suggests no packages.
-- no debconf information
__________________________________________________
Do You Yahoo!?
Sie sind Spam leid? Yahoo! Mail verfügt über einen herausragenden Schutz gegen
Massenmails.
http://mail.yahoo.com
--
To UNSUBSCRIBE, email to debian-x-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
