Package: xserver-xorg-input-mouse
Version: 1:1.4.0-4
Severity: important
Tags: patch
Most logitech trackballs do not work because there is no fdi file included.
Either such a file needs to be included in this package since trackballs
are perhaps variants of mice, or there needs to be an extra package
"xserver-xorg-input-trackball".
I have already reported this as bug #547001 against hal: the patch, in the
form of an fdi file, is included there. Presumably this bug needs to be merged
with 547001 at some point.
The logs below are from a system with the patch installed as
/etc/hal/fdi/policy/Marble-trackball.fdi
---------------------------------------------------------------------------
-- Package-specific info:
/var/lib/x11/X.roster does not exist.
/var/lib/x11/X.md5sum does not exist.
X server symlink status:
lrwxrwxrwx 1 root root 13 Apr 18 2007 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 1689944 Oct 13 12:31 /usr/bin/Xorg
/var/lib/x11/xorg.conf.roster does not exist.
VGA-compatible devices on PCI bus:
01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200 AGP (rev 01)
/var/lib/x11/xorg.conf.md5sum does not exist.
Xorg X server configuration file status:
-rw-r--r-- 1 root root 4022 Aug 7 11:53 /etc/X11/xorg.conf
Contents of /etc/X11/xorg.conf:
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
# xfs
FontPath "unix/:7100"
# xfstt
FontPath "unix/:7101"
# FontPath "/usr/share/fonts/X11/misc"
# FontPath "/usr/X11R6/lib/X11/fonts/misc"
# FontPath "/usr/share/fonts/X11/cyrillic"
# FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
# FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
# FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
# FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/share/fonts/X11/Type1"
# FontPath "/usr/X11R6/lib/X11/fonts/Type1"
# FontPath "/usr/share/fonts/X11/100dpi"
# FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
# FontPath "/usr/share/fonts/X11/75dpi"
# FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
# path to defoma fonts
# FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "vbe"
EndSection
Section "ServerFlags"
Option "BlankTime" "5"
Option "StandbyTime" "10"
Option "SuspendTime" "20"
Option "OffTime" "30"
EndSection
Section "InputDevice"
Identifier "Cherry RS6000 Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "gb"
Option "XkbOptions" "altwin:meta_win"
EndSection
Section "InputDevice"
Identifier "Logitech trackman FX"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/psaux"
# Option "Protocol" "ExplorerPS/2"
Option "Protocol" "Auto"
#Option "Buttons" "4" -- firmware seems to report 9 buttons!
Option "EmulateWheel" "true"
Option "EmulateWheelTimeout" "300"
Option "EmulateWheelButton" "8" # small red
EndSection
Section "Device"
Identifier "Matrox MGA G200 AGP"
Driver "mga"
BusID "PCI:1:0:0"
EndSection
Section "Monitor"
Identifier "ACT (Targa) TM4269"
Option "DPMS"
HorizSync 30-70
VertRefresh 50-130
Gamma 1.5 #Seems necessary despite in dcc info
Modeline "C1024x768" 88 1024 1056 1216 1304 768 770 776 798 -HSync -VSync
Modeline "C1152x864" 92 1152 1332 1492 1602 864 865 875 887
Modeline "C1280x1024" 110 1280 1360 1544 1712 1024 1025 1028 1042
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Matrox MGA G200 AGP"
Monitor "ACT (Targa) TM4269"
Option "DPMS"
DefaultDepth 16 # appears to require > 4
SubSection "Display"
Depth 1
Modes "C1152x864" "1280x1024" "640x480" "800x600" "1024x768"
"C1024x768"
EndSubSection
SubSection "Display"
Depth 4
Modes "C1152x864" "1280x1024" "640x480" "800x600" "1024x768"
"C1024x768"
EndSubSection
SubSection "Display"
Depth 8
Modes "C1152x864" "1280x1024" "640x480" "800x600" "1024x768"
"C1024x768"
EndSubSection
SubSection "Display"
Depth 15
Modes "C1152x864" "1280x1024" "640x480" "800x600" "1024x768" "C1024x768"
EndSubSection
SubSection "Display"
Depth 16
Modes "C1152x864" "1280x1024" "640x480" "800x600" "1024x768" "C1024x768"
EndSubSection
SubSection "Display"
Depth 24
Modes "C1152x864" "1280x1024" "640x480" "800x600" "1024x768" "C1024x768"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Cherry RS6000 Keyboard"
InputDevice "Logitech trackman FX"
EndSection
Section "DRI"
Mode 0666
EndSection
Xorg X server log files on system:
-rw-r--r-- 1 root root 36329 Nov 27 19:38 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file
/var/log/Xorg.0.log:
X.Org X Server 1.6.5
Release Date: 2009-10-11
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30.8-dsa-ia32 i686 Debian
Current Operating System: Linux conquest3 2.6.32-rc6 #32 PREEMPT Wed Nov 4
12:06:15 GMT 2009 i686
Build Date: 13 October 2009 11:25:51AM
xorg-server 2:1.6.5-1 (bui...@murphy.debian.org)
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Nov 27 19:23:08 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "ACT (Targa) TM4269"
(**) | |-->Device "Matrox MGA G200 AGP"
(**) |-->Input Device "Cherry RS6000 Keyboard"
(**) |-->Input Device "Logitech trackman FX"
(**) Option "BlankTime" "5"
(**) Option "StandbyTime" "10"
(**) Option "SuspendTime" "20"
(**) Option "OffTime" "30"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(**) FontPath set to:
unix/:7100,
unix/:7101,
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse'
will be disabled.
(WW) Disabling Cherry RS6000 Keyboard
(WW) Disabling Logitech trackman FX
(II) Loader magic: 0x6c0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(WW) xf86OpenConsole: setpgid failed: Operation not permitted
(WW) xf86OpenConsole: setsid failed: Operation not permitted
(--) PCI:*(0:1:0:0) 102b:0521:102b:ff03 Matrox Graphics, Inc. MGA G200 AGP rev
1, Mem @ 0xe8000000/16777216, 0xe4000000/16384, 0xe5000000/8388608, BIOS @
0x????????/65536
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) Open APM successful
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) "extmod" will be loaded. This was enabled by default and also specified in
the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in
the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in
the config file.
(II) "record" will be loaded. This was enabled by default and also specified in
the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in
the config file.
(II) "dri2" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(WW) Warning, couldn't open module freetype
(II) UnloadModule: "freetype"
(EE) Failed to load module "freetype" (module does not exist, 0)
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.1.0
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "mga"
(II) Loading /usr/lib/xorg/modules/drivers//mga_drv.so
(II) Module mga: vendor="X.Org Foundation"
compiled for 1.6.2.901, module version = 1.4.11
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w,
mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI,
mgag200 SE A PCI, mgag200 SE B PCI, mgag200 EV Maxim,
mgag200 eW Nuvoton, mgag400, mgag550
(II) Primary Device is: PCI 0...@00:00:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(--) MGA(0): Chipset: "mgag200"
(--) MGA(0): Linear framebuffer at 0xE8000000
(--) MGA(0): MMIO registers at 0xE4000000
(--) MGA(0): Pseudo-DMA transfer window at 0xE5000000
(**) MGA(0): Depth 16, (--) framebuffer bpp 16
(==) MGA(0): RGB weight 565
(==) MGA(0): Using AGP 1x mode
(==) MGA(0): Using HW cursor
(==) MGA(0): Using XAA acceleration
(--) MGA(0): Video BIOS info block at offset 0x07A60
(==) MGA(0): VideoRAM: 8192 kByte
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) MGA(0): I2C bus "DDC P1" initialized.
(II) MGA(0): I2C device "DDC P1:E-EDID segment register" registered at address
0x60.
(II) MGA(0): I2C device "DDC P1:ddc2" registered at address 0xA0.
(II) MGA(0): I2C monitor info
(II) MGA(0): Manufacturer: ACT Model: 4269 Serial#: 82032471
(II) MGA(0): Year: 1998 Week: 20
(II) MGA(0): EDID Version: 1.1
(II) MGA(0): Analog Display Input, Input Voltage Level: 0.714/0.286 V
(II) MGA(0): Sync: Separate
(II) MGA(0): Max Image Size [cm]: horiz.: 32 vert.: 24
(II) MGA(0): Gamma: 1.50
(II) MGA(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) MGA(0): redX: 0.622 redY: 0.340 greenX: 0.282 greenY: 0.600
(II) MGA(0): blueX: 0.147 blueY: 0.062 whiteX: 0.278 whiteY: 0.311
(II) MGA(0): Supported established timings:
(II) MGA(0): 720x...@70hz
(II) MGA(0): 640x...@60hz
(II) MGA(0): 640x...@75hz
(II) MGA(0): 800x...@75hz
(II) MGA(0): 1024x...@75hz
(II) MGA(0): Manufacturer's mask: 0
(II) MGA(0): Supported standard timings:
(II) MGA(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) MGA(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) MGA(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) MGA(0): Supported detailed timing:
(II) MGA(0): clock: 36.0 MHz Image Size: 310 x 240 mm
(II) MGA(0): h_active: 640 h_sync: 696 h_sync_end 752 h_blank_end 832
h_border: 0
(II) MGA(0): v_active: 480 v_sync: 481 v_sync_end 484 v_blanking: 509
v_border: 0
(II) MGA(0): Supported detailed timing:
(II) MGA(0): clock: 56.2 MHz Image Size: 310 x 240 mm
(II) MGA(0): h_active: 800 h_sync: 832 h_sync_end 896 h_blank_end 1048
h_border: 0
(II) MGA(0): v_active: 600 v_sync: 601 v_sync_end 604 v_blanking: 631
v_border: 0
(II) MGA(0): Supported detailed timing:
(II) MGA(0): clock: 108.0 MHz Image Size: 310 x 240 mm
(II) MGA(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688
h_border: 0
(II) MGA(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066
v_border: 0
(II) MGA(0): Supported detailed timing:
(II) MGA(0): clock: 78.8 MHz Image Size: 310 x 240 mm
(II) MGA(0): h_active: 1024 h_sync: 1040 h_sync_end 1136 h_blank_end 1312
h_border: 0
(II) MGA(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: 800
v_border: 0
(II) MGA(0): EDID (in hex):
(II) MGA(0): 00ffffffffffff000474694257b7e304
(II) MGA(0): 1408010128201832e846c69f57489925
(II) MGA(0): 10474fa4420031594559615901010101
(II) MGA(0): 010101010101100e80c020e01d103838
(II) MGA(0): 130036f010000018f91520f830581f20
(II) MGA(0): 2040130036f01000001e302a00985100
(II) MGA(0): 2a403070130036f01000001ec31e0020
(II) MGA(0): 410020301060130036f01000001e00a9
(II) MGA(0): end of monitor info
(II) MGA(0): EDID vendor "ACT", prod id 17001
(II) MGA(0): Printing DDC gathered Modelines:
(II) MGA(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509
-hsync -vsync (43.3 kHz)
(II) MGA(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631
+hsync +vsync (53.7 kHz)
(II) MGA(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025
1028 1066 +hsync +vsync (64.0 kHz)
(II) MGA(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772
800 +hsync +vsync (60.0 kHz)
(II) MGA(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500
-hsync -vsync (37.5 kHz)
(II) MGA(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525
-hsync -vsync (31.5 kHz)
(II) MGA(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449
-hsync +vsync (31.5 kHz)
(II) MGA(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772
800 +hsync +vsync (60.0 kHz)
(II) MGA(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625
+hsync +vsync (46.9 kHz)
(II) MGA(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509
-hsync -vsync (43.3 kHz)
(II) MGA(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631
+hsync +vsync (53.7 kHz)
(II) MGA(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772
808 +hsync +vsync (68.7 kHz)
(**) MGA(0): Using gamma correction (1.5, 1.5, 1.5)
(==) MGA(0): Min pixel clock is 17 MHz
(--) MGA(0): Max pixel clock is 250 MHz
(II) MGA(0): ACT (Targa) TM4269: Using hsync range of 30.00-70.00 kHz
(II) MGA(0): ACT (Targa) TM4269: Using vrefresh range of 50.00-130.00 Hz
(II) MGA(0): Clock range: 17.75 to 250.00 MHz
(II) MGA(0): Not using default mode "320x175" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "320x200" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1280x960" (hsync out of range)
(II) MGA(0): Not using default mode "640x480" (hsync out of range)
(II) MGA(0): Not using default mode "1280x1024" (hsync out of range)
(II) MGA(0): Not using default mode "640x512" (hsync out of range)
(II) MGA(0): Not using default mode "1280x1024" (hsync out of range)
(II) MGA(0): Not using default mode "640x512" (hsync out of range)
(II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
(II) MGA(0): Not using default mode "800x600" (hsync out of range)
(II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
(II) MGA(0): Not using default mode "800x600" (hsync out of range)
(II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
(II) MGA(0): Not using default mode "800x600" (hsync out of range)
(II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
(II) MGA(0): Not using default mode "800x600" (hsync out of range)
(II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
(II) MGA(0): Not using default mode "800x600" (hsync out of range)
(II) MGA(0): Not using default mode "1792x1344" (hsync out of range)
(II) MGA(0): Not using default mode "896x672" (hsync out of range)
(II) MGA(0): Not using default mode "1792x1344" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "896x672" (hsync out of range)
(II) MGA(0): Not using default mode "1856x1392" (hsync out of range)
(II) MGA(0): Not using default mode "928x696" (hsync out of range)
(II) MGA(0): Not using default mode "1856x1392" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "928x696" (hsync out of range)
(II) MGA(0): Not using default mode "1920x1440" (hsync out of range)
(II) MGA(0): Not using default mode "960x720" (hsync out of range)
(II) MGA(0): Not using default mode "1920x1440" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "960x720" (hsync out of range)
(II) MGA(0): Not using default mode "1152x864" (hsync out of range)
(II) MGA(0): Not using default mode "576x432" (hsync out of range)
(II) MGA(0): Not using default mode "1152x864" (hsync out of range)
(II) MGA(0): Not using default mode "576x432" (hsync out of range)
(II) MGA(0): Not using default mode "1152x864" (hsync out of range)
(II) MGA(0): Not using default mode "576x432" (hsync out of range)
(II) MGA(0): Not using default mode "1360x768" (monitor doesn't support reduced
blanking)
(II) MGA(0): Not using default mode "1400x1050" (hsync out of range)
(II) MGA(0): Not using default mode "700x525" (hsync out of range)
(II) MGA(0): Not using default mode "1400x1050" (hsync out of range)
(II) MGA(0): Not using default mode "700x525" (hsync out of range)
(II) MGA(0): Not using default mode "1400x1050" (hsync out of range)
(II) MGA(0): Not using default mode "700x525" (hsync out of range)
(II) MGA(0): Not using default mode "1680x1050" (monitor doesn't support
reduced blanking)
(II) MGA(0): Not using default mode "1680x1050" (hsync out of range)
(II) MGA(0): Not using default mode "840x525" (hsync out of range)
(II) MGA(0): Not using default mode "1680x1050" (hsync out of range)
(II) MGA(0): Not using default mode "840x525" (hsync out of range)
(II) MGA(0): Not using default mode "1680x1050" (hsync out of range)
(II) MGA(0): Not using default mode "840x525" (hsync out of range)
(II) MGA(0): Not using default mode "1920x1080" (monitor doesn't support
reduced blanking)
(II) MGA(0): Not using default mode "1920x1200" (hsync out of range)
(II) MGA(0): Not using default mode "960x600" (hsync out of range)
(II) MGA(0): Not using default mode "1920x1440" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "960x720" (hsync out of range)
(II) MGA(0): Not using default mode "2048x1536" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1024x768" (hsync out of range)
(II) MGA(0): Not using default mode "2048x1536" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1024x768" (hsync out of range)
(II) MGA(0): Not using default mode "2048x1536" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1024x768" (hsync out of range)
(II) MGA(0): Not using default mode "1680x1050" (width too large for virtual
size)
(II) MGA(0): Not using default mode "1400x1050" (width too large for virtual
size)
(II) MGA(0): Not using default mode "1440x900" (width too large for virtual
size)
(II) MGA(0): Not using default mode "1360x768" (width too large for virtual
size)
(--) MGA(0): Virtual size is 1280x1024 (pitch 1280)
(**) MGA(0): *Mode "C1152x864": 92.0 MHz, 57.4 kHz, 64.7 Hz
(II) MGA(0): Modeline "C1152x864"x64.7 92.00 1152 1332 1492 1602 864 865
875 887 (57.4 kHz)
(**) MGA(0): *Driver mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(II) MGA(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025
1028 1066 +hsync +vsync (64.0 kHz)
(**) MGA(0): *Driver mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) MGA(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509
-hsync -vsync (43.3 kHz)
(**) MGA(0): *Driver mode "800x600": 56.2 MHz, 53.7 kHz, 85.1 Hz
(II) MGA(0): Modeline "800x600"x85.1 56.25 800 832 896 1048 600 601 604 631
+hsync +vsync (53.7 kHz)
(**) MGA(0): *Driver mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) MGA(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772
808 +hsync +vsync (68.7 kHz)
(**) MGA(0): *Mode "C1024x768": 88.0 MHz, 67.5 kHz, 84.6 Hz
(II) MGA(0): Modeline "C1024x768"x84.6 88.00 1024 1056 1216 1304 768 770
776 798 -hsync -vsync (67.5 kHz)
(**) MGA(0): Mode "C1280x1024": 110.0 MHz, 64.3 kHz, 61.7 Hz
(II) MGA(0): Modeline "C1280x1024"x61.7 110.00 1280 1360 1544 1712 1024 1025
1028 1042 (64.3 kHz)
(**) MGA(0): Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(II) MGA(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025
1028 1066 +hsync +vsync (64.0 kHz)
(**) MGA(0): Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(II) MGA(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964
1000 +hsync +vsync (60.0 kHz)
(**) MGA(0): Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
(II) MGA(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868
900 +hsync +vsync (67.5 kHz)
(**) MGA(0): Default mode "1152x864": 105.0 MHz, 67.6 kHz, 75.0 Hz
(II) MGA(0): Modeline "1152x864"x75.0 104.99 1152 1224 1352 1552 864 865 868
902 -hsync +vsync (67.6 kHz)
(**) MGA(0): Default mode "1152x864": 96.8 MHz, 63.0 kHz, 70.0 Hz
(II) MGA(0): Modeline "1152x864"x70.0 96.77 1152 1224 1344 1536 864 865 868
900 -hsync +vsync (63.0 kHz)
(**) MGA(0): Default mode "1152x864": 81.6 MHz, 53.7 kHz, 60.0 Hz
(II) MGA(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868
895 -hsync +vsync (53.7 kHz)
(**) MGA(0): Driver mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz
(II) MGA(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772
800 +hsync +vsync (60.0 kHz)
(**) MGA(0): Driver mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz
(II) MGA(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772
800 +hsync +vsync (60.0 kHz)
(**) MGA(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) MGA(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772
808 +hsync +vsync (68.7 kHz)
(**) MGA(0): Default mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz
(II) MGA(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772
800 +hsync +vsync (60.0 kHz)
(**) MGA(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) MGA(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777
806 -hsync -vsync (56.5 kHz)
(**) MGA(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) MGA(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777
806 -hsync -vsync (48.4 kHz)
(**) MGA(0): Default mode "1024x768": 44.9 MHz, 35.5 kHz, 86.9 Hz (I)
(II) MGA(0): Modeline "1024x768"x86.9 44.90 1024 1032 1208 1264 768 768 776
817 interlace +hsync +vsync (35.5 kHz)
(**) MGA(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) MGA(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667
-hsync -vsync (49.7 kHz)
(**) MGA(0): Driver mode "800x600": 56.2 MHz, 53.7 kHz, 85.1 Hz
(II) MGA(0): Modeline "800x600"x85.1 56.25 800 832 896 1048 600 601 604 631
+hsync +vsync (53.7 kHz)
(**) MGA(0): Driver mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) MGA(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625
+hsync +vsync (46.9 kHz)
(**) MGA(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) MGA(0): Modeline "800x600"x85.1 56.30 800 832 896 1048 600 601 604 631
+hsync +vsync (53.7 kHz)
(**) MGA(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) MGA(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625
+hsync +vsync (46.9 kHz)
(**) MGA(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) MGA(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666
+hsync +vsync (48.1 kHz)
(**) MGA(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) MGA(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628
+hsync +vsync (37.9 kHz)
(**) MGA(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) MGA(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625
+hsync +vsync (35.2 kHz)
(**) MGA(0): Default mode "840x525": 73.1 MHz, 65.3 kHz, 60.0 Hz (D)
(II) MGA(0): Modeline "840x525"x60.0 73.12 840 892 980 1120 525 526 529 544
doublescan -hsync +vsync (65.3 kHz)
(**) MGA(0): Default mode "700x525": 61.0 MHz, 64.9 kHz, 60.0 Hz (D)
(II) MGA(0): Modeline "700x525"x60.0 61.00 700 744 820 940 525 526 532 541
doublescan +hsync +vsync (64.9 kHz)
(**) MGA(0): Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D)
(II) MGA(0): Modeline "640x512"x60.0 54.00 640 664 720 844 512 512 514 533
doublescan +hsync +vsync (64.0 kHz)
(**) MGA(0): Default mode "720x450": 53.2 MHz, 55.9 kHz, 59.9 Hz (D)
(II) MGA(0): Modeline "720x450"x59.9 53.25 720 760 836 952 450 451 454 467
doublescan -hsync +vsync (55.9 kHz)
(**) MGA(0): Driver mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) MGA(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509
-hsync -vsync (43.3 kHz)
(**) MGA(0): Driver mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) MGA(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500
-hsync -vsync (37.5 kHz)
(**) MGA(0): Driver mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) MGA(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525
-hsync -vsync (31.5 kHz)
(**) MGA(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) MGA(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509
-hsync -vsync (43.3 kHz)
(**) MGA(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) MGA(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500
-hsync -vsync (37.5 kHz)
(**) MGA(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) MGA(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520
-hsync -vsync (37.9 kHz)
(**) MGA(0): Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
(II) MGA(0): Modeline "640x480"x60.0 54.00 640 688 744 900 480 480 482 500
doublescan +hsync +vsync (60.0 kHz)
(**) MGA(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) MGA(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525
-hsync -vsync (31.5 kHz)
(**) MGA(0): Driver mode "720x400": 28.3 MHz, 31.5 kHz, 70.1 Hz
(II) MGA(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449
-hsync +vsync (31.5 kHz)
(**) MGA(0): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) MGA(0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446
-hsync +vsync (37.9 kHz)
(**) MGA(0): Default mode "680x384": 36.0 MHz, 47.4 kHz, 60.0 Hz (D)
(II) MGA(0): Modeline "680x384"x60.0 36.00 680 704 720 760 384 385 390 395
doublescan +hsync -vsync (47.4 kHz)
(**) MGA(0): Default mode "680x384": 42.4 MHz, 47.7 kHz, 59.8 Hz (D)
(II) MGA(0): Modeline "680x384"x59.8 42.38 680 716 784 888 384 385 390 399
doublescan -hsync +vsync (47.7 kHz)
(**) MGA(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) MGA(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445
-hsync +vsync (37.9 kHz)
(**) MGA(0): Default mode "576x432": 54.0 MHz, 67.5 kHz, 75.0 Hz (D)
(II) MGA(0): Modeline "576x432"x75.0 54.00 576 608 672 800 432 432 434 450
doublescan +hsync +vsync (67.5 kHz)
(**) MGA(0): Default mode "576x432": 52.5 MHz, 67.6 kHz, 75.0 Hz (D)
(II) MGA(0): Modeline "576x432"x75.0 52.49 576 612 676 776 432 432 434 451
doublescan -hsync +vsync (67.6 kHz)
(**) MGA(0): Default mode "576x432": 48.4 MHz, 63.0 kHz, 70.0 Hz (D)
(II) MGA(0): Modeline "576x432"x70.0 48.38 576 612 672 768 432 432 434 450
doublescan -hsync +vsync (63.0 kHz)
(**) MGA(0): Default mode "576x432": 40.8 MHz, 53.7 kHz, 60.1 Hz (D)
(II) MGA(0): Modeline "576x432"x60.1 40.81 576 608 668 760 432 432 434 447
doublescan -hsync +vsync (53.7 kHz)
(**) MGA(0): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) MGA(0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445
+hsync -vsync (37.9 kHz)
(**) MGA(0): Default mode "512x384": 47.2 MHz, 68.7 kHz, 85.0 Hz (D)
(II) MGA(0): Modeline "512x384"x85.0 47.25 512 536 584 688 384 384 386 404
doublescan +hsync +vsync (68.7 kHz)
(**) MGA(0): Default mode "512x384": 39.4 MHz, 60.0 kHz, 75.0 Hz (D)
(II) MGA(0): Modeline "512x384"x75.0 39.38 512 520 568 656 384 384 386 400
doublescan +hsync +vsync (60.0 kHz)
(**) MGA(0): Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
(II) MGA(0): Modeline "512x384"x70.1 37.50 512 524 592 664 384 385 388 403
doublescan -hsync -vsync (56.5 kHz)
(**) MGA(0): Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(II) MGA(0): Modeline "512x384"x60.0 32.50 512 524 592 672 384 385 388 403
doublescan -hsync -vsync (48.4 kHz)
(**) MGA(0): Default mode "512x384": 22.4 MHz, 35.5 kHz, 86.6 Hz (D)
(II) MGA(0): Modeline "512x384"x86.6 22.45 512 516 604 632 384 384 388 409
interlace doublescan +hsync +vsync (35.5 kHz)
(**) MGA(0): Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(II) MGA(0): Modeline "416x312"x74.7 28.64 416 432 464 576 312 312 314 333
doublescan -hsync -vsync (49.7 kHz)
(**) MGA(0): Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D)
(II) MGA(0): Modeline "400x300"x85.3 28.15 400 416 448 524 300 300 302 315
doublescan +hsync +vsync (53.7 kHz)
(**) MGA(0): Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(II) MGA(0): Modeline "400x300"x75.1 24.75 400 408 448 528 300 300 302 312
doublescan +hsync +vsync (46.9 kHz)
(**) MGA(0): Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(II) MGA(0): Modeline "400x300"x72.2 25.00 400 428 488 520 300 318 321 333
doublescan +hsync +vsync (48.1 kHz)
(**) MGA(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) MGA(0): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302 314
doublescan +hsync +vsync (37.9 kHz)
(**) MGA(0): Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) MGA(0): Modeline "400x300"x56.3 18.00 400 412 448 512 300 300 301 312
doublescan +hsync +vsync (35.2 kHz)
(**) MGA(0): Default mode "320x240": 18.0 MHz, 43.3 kHz, 85.2 Hz (D)
(II) MGA(0): Modeline "320x240"x85.2 18.00 320 348 376 416 240 240 242 254
doublescan -hsync -vsync (43.3 kHz)
(**) MGA(0): Default mode "360x200": 17.8 MHz, 37.9 kHz, 85.0 Hz (D)
(II) MGA(0): Modeline "360x200"x85.0 17.75 360 378 414 468 200 200 202 223
doublescan -hsync +vsync (37.9 kHz)
(**) MGA(0): Display dimensions: (320, 240) mm
(**) MGA(0): DPI set to (101, 108)
(II) MGA(0): YDstOrg is set to 0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.2.1
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(--) MGA(0): 64 DWORD fifo
(==) MGA(0): Default visual is TrueColor
(II) MGA(0): [drm] bpp: 16 depth: 16
(II) MGA(0): [drm] Sarea 2200+664: 2864
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) MGA(0): [drm] Using the DRM lock SAREA also for drawables.
(II) MGA(0): [drm] framebuffer handle = 0xe8000000
(II) MGA(0): [drm] added 1 reserved context for kernel
(II) MGA(0): X context handle = 0x1
(II) MGA(0): [drm] installed DRM signal handler
(II) MGA(0): [dri] visual configs initialized
(II) MGA(0): Memory manager initialized to (0,0) (1280,1227)
(II) MGA(0): Largest offscreen area available: 1280 x 203
(II) MGA(0): Reserved back buffer at offset 0x300000
(II) MGA(0): Reserved depth buffer at offset 0x580000
(II) MGA(0): Reserved 0 kb for textures at offset 0x800000
(II) MGA(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid filled trapezoids
8x8 mono pattern filled rectangles
8x8 mono pattern filled trapezoids
Indirect CPU to Screen color expansion
Screen to Screen color expansion
Solid Lines
Dashed Lines
Scanline Image Writes
Driver provided FillMono8x8PatternRects replacement
Setting up tile and stipple cache:
10 128x128 slots
(==) MGA(0): Backing store disabled
(==) MGA(0): Silken mouse enabled
(**) Option "dpms"
(**) MGA(0): DPMS enabled
(II) MGA(0): Using overlay video
(II) MGA(0): [DRI] installation complete
(II) MGA(0): [drm] Mapped 128 DMA buffers
(II) MGA(0): [drm] dma control initialized, using IRQ 11
(II) MGA(0): Direct rendering enabled
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: Loaded and initialized /usr/lib/dri/mga_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
[dix] Could not init font path element unix/:7100, removing from list!
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 2.2.5
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type:
KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_variant" "extd"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device PS2++ Logitech TrackMan
(**) PS2++ Logitech TrackMan: always reports core events
(**) PS2++ Logitech TrackMan: Device: "/dev/input/event1"
(II) PS2++ Logitech TrackMan: Found 8 mouse buttons
(II) PS2++ Logitech TrackMan: Found x and y relative axes
(II) PS2++ Logitech TrackMan: Configuring as mouse
(**) Option "EmulateWheel" "true"
(**) Option "EmulateWheelButton" "8"
(**) Option "EmulateWheelTimeout" "300"
(**) Option "YAxisMapping" "4 5"
(**) PS2++ Logitech TrackMan: YAxisMapping: buttons 4 and 5
(**) Option "XAxisMapping" "6 7"
(**) PS2++ Logitech TrackMan: XAxisMapping: buttons 6 and 7
(**) PS2++ Logitech TrackMan: EmulateWheelButton: 8, EmulateWheelInertia: 10,
EmulateWheelTimeout: 300
(II) XINPUT: Adding extended input device "PS2++ Logitech TrackMan" (type:
MOUSE)
(**) PS2++ Logitech TrackMan: (accel) keeping acceleration scheme 1
(**) PS2++ Logitech TrackMan: (accel) filter chain progression: 2.00
(**) PS2++ Logitech TrackMan: (accel) filter stage 0: 20.00 ms
(**) PS2++ Logitech TrackMan: (accel) set acceleration profile 0
(II) PS2++ Logitech TrackMan: initialized for relative axes.
(II) AIGLX: Suspending AIGLX clients for VT switch
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) Open APM successful
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) PS2++ Logitech TrackMan: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) Open APM successful
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) PS2++ Logitech TrackMan: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) Open APM successful
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) PS2++ Logitech TrackMan: Device reopened after 1 attempts.
HAL Information (lshal):
udi =
'/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input'
info.capabilities = {'input', 'input.mouse'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port'
(string)
info.product = 'PS2++ Logitech TrackMan' (string)
info.subsystem = 'input' (string)
info.udi =
'/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input'
(string)
input.device = '/dev/input/event1' (string)
input.originating_device =
'/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' (string)
input.product = 'PS2++ Logitech TrackMan' (string)
input.x11_driver = 'evdev' (string)
input.x11_options.EmulateWheel = 'true' (string)
input.x11_options.EmulateWheelButton = '8' (string)
input.x11_options.EmulateWheelTimeout = '300' (string)
input.x11_options.XAxisMapping = '6 7' (string)
input.x11_options.YAxisMapping = '4 5' (string)
input.x11_options.ZAxisMapping = '4 5' (string)
linux.device_file = '/dev/input/event1' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/platform/i8042/serio1/input/input1/event1'
(string)
udi =
'/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input'
info.addons.singleton = {'hald-addon-input'} (string list)
info.callouts.add = {'debian-setup-keyboard'} (string list)
info.capabilities = {'input', 'input.keyboard', 'input.keypad', 'input.keys',
'button'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port'
(string)
info.product = 'AT Translated Set 2 keyboard' (string)
info.subsystem = 'input' (string)
info.udi =
'/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input'
(string)
input.device = '/dev/input/event0' (string)
input.originating_device =
'/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string)
input.product = 'AT Translated Set 2 keyboard' (string)
input.x11_driver = 'evdev' (string)
input.xkb.layout = 'gb' (string)
input.xkb.model = 'pc105' (string)
input.xkb.options = 'terminate:ctrl_alt_bksp' (string)
input.xkb.variant = 'extd' (string)
linux.device_file = '/dev/input/event0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/platform/i8042/serio0/input/input0/event0'
(string)
DRM Information from dmesg:
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 440BX Chipset
agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xe0000000
[drm] Initialized drm 1.1.0 20060810
[drm] Initialized mga 3.2.1 20051102 for 0000:01:00.0 on minor 0
agpgart-intel 0000:00:00.0: AGP 1.0 bridge
agpgart-intel 0000:00:00.0: putting AGP V2 device into 1x mode
pci 0000:01:00.0: putting AGP V2 device into 1x mode
[drm] Initialized card for AGP DMA.
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-rc6 (PREEMPT)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) (ignored: LC_ALL
set to en_GB.UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages xserver-xorg-input-mouse depends on:
ii libc6 2.10.1-7 GNU C Library: Shared libraries
ii xserver-xorg-core 2:1.6.5-1 Xorg X server - core server
xserver-xorg-input-mouse recommends no packages.
xserver-xorg-input-mouse suggests no packages.
-- no debconf information
--
To UNSUBSCRIBE, email to debian-x-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
